Résumé du contenu de la page N° 1
EVERFOCUS
560 TVL True Day/Night Indoor
Vandal Color Camera
Operation Instructions
Model No. ED550
Please read this manual first for correct installation and operation. This manual should be retained for future
reference. The information in this manual was current when published. The manufacturer reserves the right to
revise and improve its products. All specifications are therefore subject to change without notice.
PRECAUTIONS
1. Do not install the camera near electric or ma
Résumé du contenu de la page N° 2
TABLE OF CONTENTS 1. PRODUCT OVERVIEW ...................................................................................................... 4 1.1 Main Features ............................................................................................................................................. 4 1.2 Package Contents ....................................................................................................................................... 4 1.3 Specifications ..............
Résumé du contenu de la page N° 3
5.8.7 SHARPNESS ........................................................................................................................................ 24 5.8.8 RESET ................................................................................................................................................... 24 5.8.9 RETURN ............................................................................................................................................... 25 5.9 Exit .........
Résumé du contenu de la page N° 4
1. PRODUCT OVERVIEW The new ED550 camera is designed with advanced new generation 16-bit DSP which has powerful processing capability to show over 560TVL horizontal resolution. Built-in DNR (Dynamic Noise Reduction) function, the camera performs clear & crisper image in low light and substantial disk-saving effect. In addition, designed with SENS-UP slow shutter technology, the starlight super-high sensitivity of 0.002 Lux is achieved. There are two models, one is Day/Night model, the ot
Résumé du contenu de la page N° 5
1.3 Specifications Pickup Device 1/3'' SONY Super HAD CCD Video Format NTSC or PAL NTSC: 525 TV lines, 60 fields/sec Scanning System PAL: 625 TV lines, 50 fields/sec Picture Elements 768 x 494 (NTSC) ; 752 x 582 (PAL) Horizontal Resolution 560 TVL Sensitivity 0.002Lux (SEN-UP 128x) ; 0.25Lux/ F=1.2 S/N Ratio Over 50dB (AGC off) Electronic Shutter 1/50(1/60)~1/100,000 Vari-focal lens, Auto Iris f=2.9~10mm, F=1.2 Lens Type f=9~22mm, F=1.6 *Lens models and availability vary in diff
Résumé du contenu de la page N° 6
1.4 Dimensions 2. NAMES AND FUNCTIONS OF PARTS 2.1 Front Panel Internal Sensor Note: Internal Sensor is a Day/Night Switch Sensor. - 6 -
Résumé du contenu de la page N° 7
- 7 -
Résumé du contenu de la page N° 8
2.2 Back Panel (6) (5) (7) (1) (2) (3) (4) (1) Power Input Terminal & Video Output Connector Connect to the appropriate power to each model. Video Output connector is for connecting the video output of the camera to a color monitor or other video devices through a 75 Ohm type coaxial cable with BNC female connector at backside of the camera. (2) Second Video Output Connector When installing the camera, you can use second video connector to connect a p
Résumé du contenu de la page N° 9
3. INSTALLATION Take off camera's cover first. Fix 3 screws of the bracket firmly to wall or ceiling. Adjust the camera to best angle for viewing. Use the tact switcher at the back panel to make any adjustment if needed. Finally, place the cover back to the camera. Ceiling Mount Wall Mount - 9 -
Résumé du contenu de la page N° 10
4. CAMERA SETUP OPERATIONS This camera utilizes an On Screen Display (OSD) user setup menu. 4.1 Setup Button To set items on the user setup menu, use the following switch on the back panel. Up: Adjust the switch to move the cursor upwards. This is used to select the item need to be set. Down: Adjust the switch to move the cursor downwards. This is used to select the item need to be set. Right: Adjust the switch to right direction. This is used to
Résumé du contenu de la page N° 11
4.2 Display/Close the user setup menu screen SETUP > LENS DC <┘ SHUTTER ___ WHITE BAL. ATW BACKLIGHT OFF Set button AGC MIDDLE DNR LOW SENS-UP AUTO <┘ SPECIAL <┘ EXIT I. Press the SET button The menu screen will appear on the monitor as the block shown above. II. Using the cursor switch Adjust the switch or to move the cursor up or down. Move the switch or
Résumé du contenu de la page N° 12
5. USER SETUP 5.1 Lens 1. When the SETUP menu is displayed on the screen, please direct the arrow to point to “LENS” by adjusting the switch to UP or DOWN direction. SETUP LENS > LENS DC <┘ SHUTTER ___ LEVEL WHITE BAL. ATW |+++++++++| 20 BACKLIGHT OFF AGC MIDDLE DNR LOW SENS-UP AUTO <┘ SPECIAL <┘ EXIT NOTE: 1.ED550 does not support Manua
Résumé du contenu de la page N° 13
SETUP LENS MANUAL > SHUTTER FLK WHITE BAL. ATW BACKLIGHT OFF AGC MIDDLE DNR LOW SENS-UP ___ SPECIAL <┘ EXIT ESC: The shutter speed can automatically be controlled. When ESC mode turns on, the auto control of the shutter speed can be performed according to the brightness of the screen. The range of ESC is 1 ~ 70. SETUP LENS MANUAL BR
Résumé du contenu de la page N° 14
5.3 White Balance Control The screen color can be adjusted by using the WHITE BALANCE function. 1. Please direct the arrow to point to “WHITE BAL” on the SETUP menu by adjusting the switch to UP or DOWN direction. 2. Please select the mode you would like to operate by adjusting the switch to LEFT or RIGHT direction. Please select one of the 3 modes below: ATW (Auto Tracking White Balance): This mode can be used within the color temperature range from 2,500°K to 8,300°K (eg, fluoresc
Résumé du contenu de la page N° 15
5.4 Backlight Even there is a massive backlight behind the object, bright images of the background and the object can still be obtained by using the BACKLIGHT function. 1. Please direct the arrow to point to “BACKLIGHT” on the SETUP menu by adjusting the switch to UP or DOWN direction. 2. Select the mode you would like to operate by adjusting the switch to LEFT or RIGHT direction. SETUP LENS DC <┘ SHUTTER ___ WHITE BAL. ATW > BACKLI
Résumé du contenu de la page N° 16
5.6 DNR (Dynamic Noise Reduction) Dynamic Noise Reduction in video images has the following effects. 1. Images are brighter and sharper. 2. When the level of noise is reduced, the performance of a camera can apparently be improved. 3. When it is recorded digitally, reduced noise can reduce image file size. As the level of gain changes, the background noise in the low light level automatically decreases. 1. Please direct the arrow to point to “DNR” on the SETUP menu by adjusting the
Résumé du contenu de la page N° 17
SETUP LIMIT LENS DC <┘ SHUTTER ___ > AUTO X 10 WHITE BAL. ATW BACKLIGHT OFF AGC MIDDLE DNR LOW > SENS-UP AUTO <┘ SPECIAL <┘ EXIT OFF: The function is disabled. NOTE: 1. When SHUTTER is in the manual mode, SENS UP will be disabled. 2. When AGC is turned off, SENS-UP will be disabled. 2. Press SET button when
Résumé du contenu de la page N° 18
SPECIAL > CAMERA ID OFF COLOR ADJ. <┘ SYNC. INT MOTIION DET OFF PRIVACY OFF MIRROR OFF SHARPNESS ON <┘ RESET RETURN <┘ 5.8.1 CAMERA ID Input the camera ID, and it will be appeared on the monitor. 1) Please direct the arrow to point to “CAMERA” by adjusting the switch to UP or DOWN direction. 2) Select “ON” by adjusting the switch to LEFT or RIGHT direction. 3) Press SET button. 4) Maximu
Résumé du contenu de la page N° 19
5.8.2 COLOR ADJ Adjust the Color Gain from 0 ~ 15 SPECIAL CAMERA ID OFF COLOR GAIN. > COLOR ADJ. <┘ SYNC. INT > LEVEL |++++++++| 8 MOTIION DET OFF PRIVACY OFF MIRROR OFF SHARPNESS ON <┘ RESET RETURN <┘ 5.8.3 SYNC There are two SYNCHRONIZATION modes: INTERNAL and EXTERNAL LINE-LOCK. In LINE-LOCK mode, without a synchronous generator, it synchroniz
Résumé du contenu de la page N° 20
SPECIAL MOTION DETECTION CAMERA ID OFF > AEREA SEL AREA1 COLOR ADJ. <┘ AREA STATE ON SYNC. INT TOP |+++++++++| 10 > MOTIION DET ON <┘ PRIVACY OFF DOWN |+++++++++| 25 MIRROR OFF LEFT |+++++++++| 20 SHARPNESS ON <┘ RIGHT |+++++++++| 40 RESET RETURN <┘ Please select the area you would like to detect from the 4 areas
