Résumé du contenu de la page N° 1
REFRIGERATOR-
FREEZER
ZI 921/8 FFA
INSTRUCTION BOOKLET
2223 208-63
Résumé du contenu de la page N° 2
IMPORTANT SAFETY INFORMATION It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of safety.You MUST read it care
Résumé du contenu de la page N° 3
Disposal of old Appliances The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more de
Résumé du contenu de la page N° 4
OPERATION Before using Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry thoroughly. Control panel A - Pilot light - Green B - Thermostat control knob C - Fast freeze light - Yellow D - Fast freeze switch Control Panel - Use of the freezer Temperature control The temperature within the freezer is controlled by A. Pilot light the thermostat situated in th
Résumé du contenu de la page N° 5
Fast-freezing Important For fast-freezing, push the fast freeze switch (D). The super control light (C) will then light up. In the event of a power cut the food in the freezer will The Fast-freezing function accelerates the freezing not be affected if the power cut is short and if the of fresh food and, at the same time, protects freezer is full. Do not open the door. Should the food foodstuffs already stored from undesirable warming. begin to thaw, it must be consumed quickly and must If this
Résumé du contenu de la page N° 6
Use of the refrigerator Normal Operating Sounds The thermostat regulates for both freezer and You may hear faint gurgling or bubbling sounds refrigerator compartments. when the refrigerant is pumped through the coils or tubing at the rear, to the cooling Setting the temperature plate/evaporator or to the fixed freezer shelves. Position = minimum coldness When the compressor is on, the refrigerant is being pumped round, and you will hear a whirring Position = maximum coldness sound or pu
Résumé du contenu de la page N° 7
Movable shelves The walls of the refrigerator have runners so that the shelves can be positioned as desired . For better use of space, the front half-shelves can lie over the rear ones. Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be adjusted in height. To do this proceed as shown in the diagram. The top shelf can be removed for easier cleaning. 7
Résumé du contenu de la page N° 8
HINTS AND TIPS Try to avoid keeping the door open for long Food Storage periods, or opening the door too frequently as To obtain the best results from your appliance, warm air will enter the cabinet, and cause the neither hot foods nor liquids which may compressor to switch on unnecessarily often. evaporate, should be placed in the larder Ensure there are no obstructions preventing the compartment. door from closing properly. Keep the time between buying chilled food and In the Event of
Résumé du contenu de la page N° 9
MAINTENANCE AND CLEANING Before any maintenance or cleaning work is carried out, DISCONNECT the appliance from the ELECTRICITY supply. Internal cleaning Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water). Rinse and dry thoroughly. NEVER USE DETERGENTS, ABRASIVE POWDERS, HIGHLY PERFUMED press on the rear hook and at the same time slide the CLEANING PRODUCTS OR WAX cover in the direction indicated by the arrow. POLISHES,TO CLEAN THE INTERIOR AS Un
Résumé du contenu de la page N° 10
SOMETHING NOT WORKING Important: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation a charge will be made, even if the appliance is under guarantee. Before contacting your local Service Force Centre, check the following points: Symptom Solution No power to the appliance Check there is power at the socket. Check there is not a power cut by checking the household lights. Check the fuse has not blown. The light does not come on Ensure t
Résumé du contenu de la page N° 11
SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:- 0870 5 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.uk For Customer Service in the Republic of Irela
Résumé du contenu de la page N° 12
GUARANTEE CONDITIONS Standard guarantee conditions We, Zanussi, undertake that if within 12 months of the date of the purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. The appliance has been u
Résumé du contenu de la page N° 13
TECHNICAL SPECIFICATIONS POWER SUPPLY VOLTAGE AND FREQUENCY 220-240 V / 50 Hz TOTAL POWER ABSORBED 160 W AVERAGE DAILY UNITS ELECTRICITY * 0.86 kWh GROSS CAPACITY Fridge 214 l Freezer 68 l NET CAPACITY Fridge 210 l Freezer 55 l STAR RATING * This figure is based on standard test results in accordance with European Standard EN 153. Actual consumption will depend on how the appliance is used and where it is located. 13
Résumé du contenu de la page N° 14
INSTALLATION Important Warning IF YOU ARE DISCARDING AN OLD APPLIANCE It must be possible to disconnect the appliance from THAT HAS A LOCK OR CATCH ON THE DOOR, the mains power supply; the plug must therefore be YOU MUST ENSURE THAT IT IS MADE easily accessible after installation. UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE. Depending upon the position which you choose for your appliance, you may wish to reverse the way in which the door opens. To do this, refer to instructions on “D
Résumé du contenu de la page N° 15
For replacement, use a 13amp BSI362 fuse. Only ASTA or BSI approved fuses should be used. Electrical connections The plug must not be used if the fuse cover/carrier is Any electrical work required to install this appliance lost. The cover/carrier is indicated by the coloured should be carried out by a qualified electrician or insert at the base of the plug. competent person. A replacement cover/carrier must be obtained from WARNING:THIS APPLIANCE MUST BE your local Zanussi Service Force Centre.
Résumé du contenu de la page N° 16
Instructions for totally built-in appliances Door reversal The appliance is supplied with the right or left door opening.To change the opening direction of the door proceed as in the following instructions before installing it. 1. Unscrew the upper pin and remove the spacer 2. Remove the upper door 3. Remove the hinge cover (A). Unscrew the pins (B) and the spacers (C) and refit them on the middle hinge of the opposite side. Snap the hinge cover (A). 4. Refit the upper door, the upper
Résumé du contenu de la page N° 17
Fit the appliance in the niche by making sure that it stands against the interior surface of the unit on the side where the door hinges of the appliances are fitted. Insert the appliance until the upper strip butts up against the unit (1) and make sure that the lower hinge is in line with the surface of the unit (2). Fasten the appliance with 4 screws provided in the kit included with the appliance. (I = short) (P = long) Apply the sealing strip pushing it between the refrigerator a
Résumé du contenu de la page N° 18
Place guide (Ha) on the inside part of the furniture door, up and down as shown in the figure and mark the position of external holes. After having drilled holes, fix the guide with the screws supplied. Fix cover (Hc) on guide (Ha) until it clips into place Open the appliance door and the furniture door at 90°. Insert the small square (Hb) into guide (Ha). Put together the appliance door and the furniture door and mark the holes as indicated
Résumé du contenu de la page N° 19
Fix cover (Hd) on guide (Hb) until it clips into place. If the appliance is fixed to the side of the kitchen unit, simply slacken the screws in fixing brackets (E), move the brackets as shown in the figure and re- tighten the screws. After completion of the door reversing operation, check that the door gasket adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of
Résumé du contenu de la page N° 20
© Electrolux plc 2007
