Résumé du contenu de la page N° 1
FREEZER
ZUD 9100 F
INSTRUCTION BOOKLET
2222740-62
Résumé du contenu de la page N° 2
CONTENTS Instructions for the User Instructions for the Installer Important Safety Instructions 3 Technical Specifications 15 Description of the Appliance 4 Installation 15 Positioning 15 Operation 5 Before use 5 Electrical Connection 16 Freezer controls 5 Starting your appliance 5 Building-in Instructions 17 Temperature control 5 Grid preparation 17 Warning light (red) 5 Door reversal 17 Temperature acoustic alarm 5 Building the appliance in under a worktop 18 Open door acoustic alarm 6 Fitting
Résumé du contenu de la page N° 3
IMPORTANT SAFETY INSTRUCTIONS These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Department. Prior to Installation General Safety n Check the appliance for transport damage. Under n This appliance contains hydrocarbons in its no circumstance should a damaged appliance be cooling uni
Résumé du contenu de la page N° 4
n When unplugging always pull the plug from the mains socket, do not pull on the cable. Servicing n This product should be serviced by an authorised engineer and only genuine spare parts should be used. n Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or seri- ous malfunctioning. Contact your local Service Force Centre. At the end of the Appliance Life n When disposing of your appliance use an autho- rised
Résumé du contenu de la page N° 5
OPERATION Before use Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or deter- gent as the smell may linger. Dry thoroughly. Freezer controls 6 1 5 2 4 3 ˘ ¯ ˜ ˆ ´ ` Thermostat control knob Push button ON/OFF ` Pilot light ´ Warning light ˆ Fast-freezing indicator light ˜ Push button for fast-freezing and for stopping the audible signal (warning light on) ¯ Symbol for audible alarm (temperature wa
Résumé du contenu de la page N° 6
on. This signal can be temporarily stopped by Important depressing the push button for fast-freezing . ¯ Do not put carbonated liquids, (fizzy drinks The fast-freezing push button can be released as etc.), in the freezer compartment. soon as the warning light is off. Ice lollies, if consumed immediately after removal from the freezer, can possibly result in a low temperature skin burn. Open door acoustic alarm Do not remove items from the freezer if your hands are damp/wet, as this could cause s
Résumé du contenu de la page N° 7
HEALTH AND SAFETY GUIDELINES Because of consumer demand, preservatives have been removed from many pre-prepared foods. This together with the changes in shopping habits to a once-a-week shop, mean that safe handling and storage of food is even more important than ever. The following tips should help you to ensure that the food in your home is in as perfect condition as possible. n Keep the freezer door closed as much as possi- n Never place hot food, bottles or cans of fizzy ble. drink in the f
Résumé du contenu de la page N° 8
DEFROSTING The freezer compartment will become progressively Important covered with frost. This should be removed with the In the event of a power failure causing the special plastic scraper provided, whenever the thick- temperature within your freezer to rise, do ness of the frost exceeds 1/4". not re-freeze the food without checking its condition. The following guidelines should During this operation it is not necessary to switch off assist you: the power supply or to remove the foodstuffs. Ho
Résumé du contenu de la page N° 9
MAINTENANCE AND CLEANING Before any maintenance or cleaning work is carried out, DISCONNECT the appliance from the ELEC- TRICITY supply. Warning This appliance contains hydrocarbons in its cooling unit maintenance and recharging must therefore only be carried out by authorised technicians. Internal cleaning Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water). Rinse and dry thoroughly. NEVER USE DETERGENTS, ABRASIVE POW- DERS, HIGHLY PERFUMED CLEAN
Résumé du contenu de la page N° 10
SOMETHING NOT WORKING? Before contacting your local Service Force Centre check the following points. IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. Symptom Solution No power to the appliance - Check there is power at the socket. - Check there is not a power cut by checking the household lights. - Check the fuse has not blown. The temperature in the freez
Résumé du contenu de la page N° 11
SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if Before calling out an engineer, please ensure you you wish to purchase spare parts please contact have read the details under the heading ‘Something your local Zanussi Service Force Centre by Not Working?’ telephoning: When you contact the Service Centre you will need to give the following details. 1. Your name, address and post code 0870 5 929929 2. Your telephone number 3. Clear and concise details of the fault You
Résumé du contenu de la page N° 12
12
Résumé du contenu de la page N° 13
13
Résumé du contenu de la page N° 14
GUARANTEE CONDITIONS Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of purchase this Zanussi appliance or any part there- of is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: n The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. n The appliance has been
Résumé du contenu de la page N° 15
TECHNICAL SPECIFICATIONS DIMENSIONS Height 81,5 cm Width 59,6 cm Depth 54 cm POWER SUPPLY VOLTAGE AND FREQUENCY 220-240 V / 50 Hz TOTAL POWER ABSORBED 90 W AVERAGE DAILY UNITS ELECTRICITY(*) 0,72 kWh GROSS CAPACITY 108 l NET CAPACITY 100 l STAR RATING (*)This figure is based on standard test results in accordance with European Standard EN153. Actual con- sumption will depend on how the appliance is used and where it is located. INSTALLATION Positioning This appliance should only be installed at
Résumé du contenu de la page N° 16
ELECTRICAL CONNECTION This appliance complies with the E.E.C. Directive WARNING: No. 87/308 of 2.6.87 relative to radio interference THIS APPLIANCE MUST BE EARTHED. suppression. The manufacturer declines any liability should this safety measure not be This appliance complies with the following observed. E.E.C. Directive: - 73/23 EEC of 19.2.73 (Low Voltage Directive) If the plug that is fitted to your appliance is not suit- and subsequent amendments. able for your socket outlet, it must be cut
Résumé du contenu de la page N° 17
BUILDING-IN INSTRUCTIONS Before carrying out any work, remove the plug from the power socket. Grid preparation Left door opening: A Remove the left side (A) of the grid cutting it from the rear (see figure). Right door opening: B Remove the right side (B) of the grid cutting it from the rear (see figure). DO002/2 To position the grid on the appliance proceed as fol- lows: Apply the grid to the base of the appliance by pushing a on to the clasps (a) until they click. a DO001 Door reversal To reve
Résumé du contenu de la page N° 18
600 550 min. Attention 10 After completion of the door reversing opera- tion, check that the door gasket adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to 13 the cabinet. In that case, wait for the natural fit- ting of the gasket or accelerate this process by heating up the part involved with a normal hairdryer on a low setting. 9 12 11 3 Building in the appliance under a worktop 1. The dimensions of the recessed installation area mu
Résumé du contenu de la page N° 19
596 3. Two cabinet securing brackets are supplied with the installation pack. They need to be assembled onto the cabinet prior to cabinet being pushed into the Kitchen aperture. - To fit these brackets remove the two screws at the top left and right hand front corners of the cabinet. - Position the two brackets as shown in the figure Left hand Right hand and replace the two securing screws. bracket bracket 4. Push the appliance into place. The plug socket necessary for connection of the applianc
Résumé du contenu de la page N° 20
10 7. Screw appliance into place and retain the cabinet with screws through the securing brackets into the worktop or adjacent woodwork as necessary. 5 8. To mount the furniture door proceed as shown in the figures: 2 1 a C 4 3 b 6 ab C clic C clic c 7 8 20
