Résumé du contenu de la page N° 1
model t10097
Wet grinder
Copyright © June, 2008 By grizzly industrial, inC.
Warning: no portion of this manual may be reproduced in any shape
or form Without the Written approval of grizzly industrial, inc.
#JB10797 printed in germany
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
safety for your own safety read instruction manual before operating this equipment the purpose of safety symbols is to attract your attention to possible hazard- ous conditions. this manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. the progression of symbols is described below. remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures. indic
Résumé du contenu de la page N° 4
7. o nly allo W trained and 17. remove ad Justing Keys properly supervised per- and Wrenches. make a habit sonnel to operate machin- of checking for keys and adjusting ery. make sure operation instruc- wrenches before turning machinery tions are safe and clearly under- ON. stood. 18. checK for damaged parts 8. Keep children and visitors before using machinery. aWay. Keep all children and visi- Check for binding and alignment tors a safe distance from the work of parts, broken parts, par
Résumé du contenu de la page N° 5
additional safety instructions for grinders 1. eye protection. grinding causes 6. lung protection. grinding pro- small particles to become airborne duces hazardous dust, which may at a high rate of speed. al Ways cause long-term respiratory problems wear safety glasses when using this if breathed. always wear a niosh machine. approved dust mask or respirator when grinding. 2. Wheel speed rating. Wheels operated at a faster speed than rated 7. side grinding . g rinding on the for may break
Résumé du contenu de la page N° 6
introduction f oreword contact info We are proud to offer the g rizzly model We stand behind our tools. if you have t 10097 Wet g rinder. t his model is part of any service questions or parts requests, a growing g rizzly family of fine power tools. please call or write us at the location listed When used according to the guidelines set below. forth in this manual, you can expect years of trouble-free, enjoyable operation and grizzly industrial, inc. proof of g rizzly’s commitment to custome
Résumé du contenu de la page N° 7
specs MACHINE DATA SHEET Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901 MODEL T10097 WET GRINDER Overall Dimensions: Main Specifications: Motor: Features: model t10097 Wet grinder -7-
Résumé du contenu de la page N° 8
circuit re Quirements 110v operation electrocution or fire could result if machine amperage draw is not grounded cor- t he model t 10097 motor draws the follow- rectly or if electrical ing amps under maximum load: configuration does not comply with local and state codes. ensure motor draw .................................. 1.2 amps compliance by check- ing with a qualified minimum circuit requirement electrician! We recommend connecting your machine to a dedicated and grounded circuit th
Résumé du contenu de la page N° 9
section 3: setup unpacking inventory t he model t 10097 was carefully packed model t10097 inventory (figure 2) when it left our warehouse. if you discover a. t10097 Wet grinder .......................... 1 any parts are damaged after you have b. universal grinding Jig ........................ 1 signed for delivery, please immediately c. angle guide ....................................... 1 call Customer Service at (570) 546-9663 d. polishing/honing paste ...................... 1 for advice.
Résumé du contenu de la page N° 10
site c onsiderations Wheel inspection d o not assume that a wheel is in sound bench load condition just because it is new—often r efer to the machine data sheet on page damage can occur in shipping, with age, 7 for the weight and size specifications of or with prolonged exposure to moisture. your machine. s ome workbenches may inspect every wheel for damage. require additional reinforcement to support both the machine and the workpiece. First, do a visual inspection. l ook for any crac
Résumé du contenu de la page N° 11
4. an undamaged wheel will emit a clear to test run the machine: metallic ring or “ping” sound in each 1. make sure you have read the safety of these spots. a damaged wheel will instructions at the beginning of the respond with a dull thud that has no manual and that the grinder is setup clear tone. properly. 5. if you determine from the ring test that 2. make sure all tools and objects used the wheel is damaged, do not use it! during set up are cleared away from the grinder. Finally,
Résumé du contenu de la page N° 12
operations o peration safety although the model t10097 Wet grinder wheels are designed specifi- cally for slow rotation, there is still the possibility that blades and tools being sharpened on either wheel could be damage to your eyes and lungs could dislodged from your grasp. be sure result from using this machine with- that satisfactory space is allocated out proper protective gear. a lways between the grinder and areas where wear safety glasses/faceshield and a others are working. a
Résumé du contenu de la page N° 13
t o work with the rotation of the grind- positioning the ing wheel: universal support 1. position the machine with the on/oFF switch facing away from you. t he model t 10097 Wet g rinder is equipped with a universal support that 2. attach the universal support into the serves as a tool rest and as an attachment horizontal mounts as shown in figure point for job-specific accessories. it can 7. Be sure it is securely positioned and be attached in two positions, allowing for will not move
Résumé du contenu de la page N° 14
3. insert the tool into the jig clamp, as g rinding Jig shown in figure 9, then use the angle guide, as described in angle guide on page 15, to set the grinding angle. the model t10097 Wet grinder includes a grinding jig for securing a variety of tools tool during grinding. (Varies) to use the grinding jig: 1. dis Conne Ct grinder From poWer! lock angle guide 2. slide the grinding jig onto the universal Knob support as shown in figure 8. figure 9. Clamping tool. 4. once the grinding ang
Résumé du contenu de la page N° 15
2. Find the angle notch that best fits the a ngle g uide tool you wish to grind by placing the beveled edge of the workpiece into each notch until you find the notch that most closely matches the angle of the t he model t 10097 Wet g rinder comes beveled edge. with an angle guide to help identify and maintain the cutting angle on a variety of 3. place the angle guide on the wheel tools. with the desired angle notch (found in to use the angle guide: step 2) against the wheel and adjacen
Résumé du contenu de la page N° 16
to fill and position the reservoir: Water r eservoir 1. make sure the grinder is disconnected from power and that the grinding wheel t he model t 10097 Wet g rinder is designed is not rotating. for wet grinding and should never be used without some kind of fluid. 2. remove reservoir, clean it out, and fill with water to just below the V-shaped notch. t he mounting tabs on the reservoir serve as hooks to attach to the reservoir mount- 3. attach the reservoir to the grinder. ing slots (f ig
Résumé du contenu de la page N° 17
sharpening never sharpen against the direction of rotation. the edge of the tool may t he leather stropping wheel on the model dig into the leather wheel, damaging t 10097 and the included abrasive strop- the wheel and causing the tool to ping paste can be used to obtain a razor eject from the machine. this could sharp edge on many tools. Before use, result in personal injury the stropping wheel must be properly prepared. 3. evenly apply a light machine oil to the leather wheel. use en
Résumé du contenu de la page N° 18
section 5: accessories t10023—accessory Kit #1 t10025—sharpening Jig. includes fixtures for sharpening small Jig for sharpening 16" planer blades sharp- knives, large knives, scissors and axes. ens all planer and jointer blades up to 16" long. figure 14. model t10023 t10024—accessory Kit #2 includes a stone dresser and fixtures for sharpening scrapers, screwdrivers and hol- low chisels. figure 16. model t10025. h5891, h5892 diamond dressers Industrial diamond for dressing grinding wheels.
Résumé du contenu de la page N° 19
section 6: maintenance g rinding Wheels ! the grinding wheel should be inspected before every use. use the ring test method described in Wheel inspection on page 10 to verify the structural integrity of the wheel. take care in storing grinding wheels to keep them free from potential damage from moisture, being dropped, or getting a lways disconnect po Wer before dropped on. servicing, adjusting, or doing main- tenance to reduce the risk of acci- dental injury or electrocution. Wheel r e
Résumé du contenu de la page N° 20
section 7: service t roubleshooting motor and electrical symptom possible cause solution motor will not start; 1. disabling key is at fault. 1. install/replace disabling fuses or circuit key; replace switch. breakers blow 2. open circuit in motor or loose 2. inspect/repair all lead con- connections. nections on motor for loose or open connections. 3. start capacitor is at fault. 3. replace start capacitor. 4. short circuit in motor or loose 4. inspect all connections on connections. motor for
