Résumé du contenu de la page N° 1
Twin-tub Washing Machine with Pump
User's manual
Twin-tub Washing Machine
User's manual
This manual is for
XPB60-113S
Please read this manual
carefully before using.
Retain it for future reference.
Résumé du contenu de la page N° 2
Contents Names of the parts Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Trouble-Shooting *Answer to question Packing list *Specification 17
Résumé du contenu de la page N° 3
Names of the parts Buzzer Water-filling entrance Outer cover of the spin tub Water inlet selector handle Inner cover of the spin tub Wash selector Spin timer Wash timer Spin tub frame Control panel Spin tub Overflow filter Quick water-filling entrance Cabinet Drain hose hook Water level adjusting lever Lint filter(Installed by user) Pulsator Wash tub Drain hose Wash tub cover Base frame Meaning and description of the symbols Contents marked with that symbol are related
Résumé du contenu de la page N° 4
Safety precautions Please insert the power cord into When the machine is normally special receptacle with rated vol- using, please put the power plug tage. Be sure to use single-phase at the location easily to be insert- three pins receptacle. The earthing ed and extracted by hand. Be sure terminal of the receptacle must be to pull the plug off when there's earthed reliably. If possible, please power failure, or the machine is being moved, cleaned or when it adopt electric leakage protect
Résumé du contenu de la page N° 5
Safety precautions Do not stretch hands into the working Do not decompose, repair or alter the machine. It is dangerous even if the machine by yourself. rotation is slow. Take special care of the children. Do not put any hot or heavy items Do not wash laundries with volatile ( such as the kettle with hot water ) materials (such as thinner, petrol etc.). on the washing machine. Keep the machine away from direct Handicapped or child
Résumé du contenu de la page N° 6
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter Put the underside of the lint filter into overflow filter then push the upside into overflow filter overflow filter After installation, please refer that the lint filter installed to the right station, otherwise the lint filter may be fallen off when washing, influencing your use. l
Résumé du contenu de la page N° 7
How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain hose. Extend the drain hose from the side of spin tub. Take off the drain hose from the hanging Drain hose Figure 1 fixing hook hole of the cabinet. Pull the drain hose fixing hook outwards gently to take out Side sectional view the drain hose from the two fixing hooks. Fixing hook Drain hose (As per Figure 2) installation hole fixing hook Drain hose Pull outwar
Résumé du contenu de la page N° 8
Install the water inlet hose; Select the water level Insert the water inlet hose into the water-filling entrance on the control pane directly.(pull it out to dismantle it) Water inlet hose Water inlet Select water level according to the quantity of the laundries. Water level Set the water level adjusting lever indicator to needed line. Max. Maximum Med Medium Use the new water inlet hose provided Min Minimum with the machine to connect to the water faucet. Old hose sets shou
Résumé du contenu de la page N° 9
Preparation before washing Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put up the drain hose . 4.Slanting or uneven ground may result in unstable working or abnormal noise. Please make the machine stand horizontally. Pay attention to followings before washing the laundries Check if Th
Résumé du contenu de la page N° 10
The musts in washing The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. The thickness ,size , type of the cloth will influ- ence the actual washing capacity. It is suit- able to put in reasonable amount of laundries and the laundries can be turned round in wash- ing for one
Résumé du contenu de la page N° 11
Washing sequence Water-filling selector handle Overfilling sign Wash timer Wash selector Spin timer Buzzer Water-filling entrance (To set to below 2 minute, (to set to below 1 minute, (Strong current, (The buzzer will ring when first set to 5 minute then first set to 2 minute then standard current) the washing finishes) turn it back. it can increase turn it back. it can increase the service life of the timer). the service life of the timer). OFF OFF STRONG OFF STANDARD MAX DRAIN BU
Résumé du contenu de la page N° 12
Midway spinning 1.Put the laundries into the spin tub evenly and smoothly. 2.Spin (1) Put the gland in properly. Please put in the gland properly even if the laundries quantity is small. Push Gland Push Proper Proper The laundries No gland are slanting (2) Close the inner and outer cover of the spin tub. Outer cover of The spin tub Inner cover of The spin tub (3) Spin for 1-2 minutes. 3.Run the foam-removing spinning. (1) Open the outer cover of the spin tub. (2) Set the water-fi
Résumé du contenu de la page N° 13
Rinsing Rinse with water-filling 1.Put the laundries into the wash tub. Select suitable current according to the laundries. OVERFLOW If you find water flo- 2.Adjust the water level wing out here,please Set the water level with water level adjusting twist the water tap to lever according to the laundries quantity. limit the water filling. Then fill suitable water continuously. 3.Rinse Adjust the wash timer to 5-7 minutes to do rinsing. (Repeat the midway
Résumé du contenu de la page N° 14
Spinning 1. Put the laundries into the spin tub evenly and smoothly. 2. Press the gland in the tub properly. Close the inner and outer cover of the spin tub. 3. Spin Select suitable spin time according to the laundries, and do spinning. During spinning, if there's abnormal sound, it is generally owing to slanting placement of the laundries. Please stop the machine and re-order the laundries. In spinning, it will pause the work if you op
Résumé du contenu de la page N° 15
Disposal after washing After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the lint filter The lint filter must be used during washing. It must be cleaned in time after each using. 1. Take off the lint filter Put hand at the indicated position. Push down to take it off. ( See to Figure 1) Figure
Résumé du contenu de la page N° 16
Cleaning the overflow filter 2. Take off the corrugation pipe. Water level Dismantle the upper part of the adjusting lever corrugation pipe inside the overflow filter ( as indicated in Corrugation Figure 1). Pipe 3. Cleaning the overflow filter Clean the lint around the filter Figure 1 and flush with tap water. 4. Install the overflow filter. (1).Install the corrugation pipe. (2).Insert the mounting plate at Hook the bottom of the fi
Résumé du contenu de la page N° 17
Trouble-shooting Answer to question If the laundries fall to the outer side of the spin tub If the laundries fall to the outer side of the spin tub, please take them out immediately. 1.Dismantle As indicated in the figure, push the point marked Spin tub frame with " " to pull the spin tub frame to oblique upwards to dismantle it. 2.Install After install the back edge of the spin tub frame to proper position, push the four points marked with " " by force to reset it. Please check care
Résumé du contenu de la page N° 18
Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena The reason Is there power failure? Is the power plug loose? The
Résumé du contenu de la page N° 19
Packing list Quantity Name One piece User's manual One piece Water inlet hose One piece Lint filter Water-filling jointer One piece One piece Gland One set Twin-tub washing machine Specification Water level/Water quantity (about) Maximum/55L Medium/46L Minimum/36L Injection pressure(MPa) 0.02~0.2 Rated washing /spinning capacity(kg) 6.0/6.0 17
