Résumé du contenu de la page N° 1
User's manual
XQB42-62
Full Automatic Washing Machine
Contents
Before using
Names of the parts.............the 2nd cover
Safety precautions .......................1
Installation and adjustment ..................3
Install the water inlet hose............5
Using process
Preparation before washing .............7
Put in the laundries .........................8
Put in the detergent .......................9
Use the operation buttons ................10
Close the top lid ......
Résumé du contenu de la page N° 2
Before Using Names of the parts Before Using Honourable users, Thank you for choosing our products. Our products integrate high-tech, precision,frontier science.To facilitate using it, please read this manual carefully and operate this machine according to it. Power switch water valve Top lid Sop mat Detergent box Control panel Power line (Installed by user) Lint filter Inner tub Cabinet handle Control panel film back cover Pulsator Drain hose Cabinet fixed foot (3) Adjustable foot Access
Résumé du contenu de la page N° 3
Before Using Safety precautions Before Using Please insert the power cord into special rece- The power cord plug should be convenient ptacle with rated voltage.If the power cord is to be pluged in or pluged out with hand three-phase wire,please use three-phase rec- while the washing machine runs normally. eptacle.The earthing terminal of the receptacle Be sure to pull the plug out and close the must be earthed reliably.If it is two-phase wire, water tap when the machine is idle,when please g
Résumé du contenu de la page N° 4
Before Using Before Using Do not stretch hands into the working Do not decompose, repair or alter the machine. It is dangerous even if the machine by yourself. rotation is slow. Take special care of the children.Do not let the children climb the washing machine. Do not put any hot or heavy items (such Do not wash laundries with volatile as the kettle with hot water ) on the materials (such as thinner, petrol etc.) washing machine. The handicapped or children without Kee
Résumé du contenu de la page N° 5
Before Using Before Using Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter Install the bottom plate After you open the package, 1.Press downward to please lean the washing assmble. Back machine gently down on soft 2.Pull upward to detach. items ( like the towel cloth, Front blanket, etc. ). Install the bottom plate to the bott
Résumé du contenu de la page N° 6
Before Using Before Using Usage of the lower drain hose The drainage shall be smooth with the drain hose. 1. The height of the drain hose shall be less than 10 Cm, or the drainage will not be smooth , and cost <10cm such long time that machine may stop at mid way. 2. Do not step on or press the drain hose. 3. If the drain hose is too long , cut it at mid point. To make smooth drainage, cut the front end of the hose into slope. 4. If extra drain hose is needed, please make sep
Résumé du contenu de la page N° 7
Before Using Install the water inlet hose Before Using Confirm the water tap Water tap,suitable Water tap,not suitable Outlet end surface >10mm It is required that the front end shall be longer than 10mm. The outlet end surface of the tap shall be flat and smooth. If not please file it to avoid leakage. Connection between the water inlet hose jointer and the water tap 1.Use the new water inlet hose provided with the machine to connect to the water faucet.Old hose sets should not be reused.
Résumé du contenu de la page N° 8
Before Using Before Using Connection between the water inlet hose and the washing machine 1.Do not take off the water absorption Nut of the water inlet hose cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2.Put the nut of the water inlet hose on the valve jointer. 3.Fasten the nut. Swaying it gently to Water absorption cushion Jointer of the water inlet valve confirm if it's s
Résumé du contenu de la page N° 9
Using process Using process 1 Preparation before washing Preparation before washing 1.Connect the water inlet hose and open the water tap . 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put up the drain hose. Pay attention to followings before washing the laundries Confirm if Clear the pocket. Fasten the The quantity of When the pulsator there's special T
Résumé du contenu de la page N° 10
Using process Using process 2 Put in the laundries The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. One time washing quantity shall be lower than the rated capacity. The largest capacity of this machine is 4.2kg. The thickness, size, type of the cloth will influence the actual washing capacity. It is suitable for one time washing to put in reasonable amount of laundries and
Résumé du contenu de la page N° 11
Using process Using process 3 Put in the detergent How to use the washing powder Direct dissolved in the machine 1.Fill water to "Low" water level. 2.Add the power. Run for 30 seconds to dissolve it completely. 3.Put in the laundries. Select suitable water level. The instant dissolving of the washing How to use the whitener powder: 1.Prepare warm water of 30 and a container. Fill water to decided level. Dilute the whitener with container. Pour 2.Add the powder while stirring to fully dissolve i
Résumé du contenu de la page N° 12
Using process 4 Use the operation buttons Using process a. Description of the function of the buttons Mode and meaning of the indicator light Flashing: indicate the running program On: indicate the program about to run, or indicate the selected mode Flashing rapidly: indicate abnormal condition T Tw wo o b button utton twice- twice-wash wash PROGRAM QUICK TWICE SOAK WASH WASH Procedure selection one or more one out of the five procedure programs are available for your option: quick twice-wa
Résumé du contenu de la page N° 13
Using process Using process start/pause botton "Power switch" button After the power is switched on, push it to start the machine Push the "On/Off" button to switch on the power. During working, push it to pause working. When the power is on, push it again to switch off During pause, push it to resume working. the power. POWER SWITCH WATER LEVEL SWITCH AUTO-OFF HIGH MEDIUM LOW ON OFF START PAUSE SPIN "Water Level Selection" button Select or adjust the water level. Description: 1.Push the power
Résumé du contenu de la page N° 14
Using process Using process Operating procedure and explanations for the b. buttons T Tw wo button o button twice- twice-wash wash START PROGRAM PAUSE QUICK SPIN TWICE WASH SOAK WASH Push the "Power switch" button to switch on the power. Press the "PROGRAM"button to select the suitable PROGRAM procedure program. After switching on the power, the machine will set to standard program automatically including "wash-rinse-spin". To select other program, push the "Procedure selection" button to se
Résumé du contenu de la page N° 15
Using process Using process Attention Even there's no water in the tub, the spinning will start after a certain period. Do not use the "Twice wash" program for the woolen laundries. Wash the laundries that are prone to lose colors separately from other laundries. The pulsator will not rotate unless the water is filled to selected water level. Selection method of the procedure programs Times of pushing Contents (the lighted indicators Selected procedure the "Process Applicable proce
Résumé du contenu de la page N° 16
Start Pause Using process Using process * Total time: including the normal water inlet time, drain time, excluding the power off time. The total washing time may be influenced by the water inlet pressure and water level. * Spin time: the time from intermittent running to finishing * When selecting " Twice wash " program, first soak for about 20 minutes, pre-wash for about 8 minutes, then soak for about 5 minutes, then do washing, rinsing and spinning. The wash time in the list inc
Résumé du contenu de la page N° 17
Using process Using process Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. The lint filter must be used during washing. It must be cleaned in time after each using Lint filter: 1.Rotate the inner tub with hand till the lint filter reaches the position convenient for you to take it off. Pull it up to dism
Résumé du contenu de la page N° 18
Trouble shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomenan The reason How to settle In spinning, the machine stops running. (The
Résumé du contenu de la page N° 19
Packing list Name Quantity Storage position User's manual One Inside the document bag Certificate of qualification One Inside the document bag Post card One Inside the document bag Certificate of warranty One Inside the document bag Components of the One Inside the accessory bag water inlet hose Between the upper cushion of the Bottom plate One washing machine package and the upper seal of the package carton Eight Tapping screws ST4x12-A Inside the accessory bag Computerized Automati
Résumé du contenu de la page N° 20
Specification Specification Model XQB42-62 Rated voltage frequency 220V ~ 50Hz Rated washing / spinning capacity 4.2kg (weight of standard dry cloth) Water level/Water quantity (about) High/36L, Medium/30L, Low/21L Max water consumption About 108L(High water level; Standard program) Injection pressure 0.03Mpa-0.78Mpa Rated washing power 325W Rated spinning power
