Résumé du contenu de la page N° 1
LCD MONITOR
MODEL
MLM300
User Manual
MLM400
Résumé du contenu de la page N° 2
Table of Contents Important Information .......................................................................................................................... 1 Safety Precautions, Maintenance, & Recommended Use ................................................................. 2 Contents .................................................................................................................................................... 3 Attaching LCD Options ..................................
Résumé du contenu de la page N° 3
Important Information WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE
Résumé du contenu de la page N° 4
Safety Precautions, Maintenance & Recommended Use Safety Precautions and Maintenance CAUTION FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN Immediately unplug your monitor from the wall outlet and refer SETTING UP AND USING THE MLM300 LCD COLOR MONITOR: servicing to qualified service personnel under the following • DO NOT OPEN THE MONITOR. There are no user serviceable parts conditions: inside and opening or removing covers may expose you to danger- • When the power supply cord or plu
Résumé du contenu de la page N° 5
Contents Your new MLM300 monitor box* should contain the following: • LCD monitor • Power Cord (3m) • Video Signal Cable – SC-B113 (4m) • User’s Manual • Wireless Remote Control and AA Batteries • Screw (M4 x 10) x 2 Ferrite Core x 2 • CD-ROM • Ferrite Core x 2 • Clamper x 2 Band • Band Power Cord Video Signal Cable (D-SUB to D-SUB Cable) Clamper x 2 Screw (M4 x 10 ) x 2 LCD MONITOR MODEL MLM300 User Manual CD-ROM Wireless Remote Control and AA Batteries User’s Manual *Install an attached stand
Résumé du contenu de la page N° 6
Attaching LCD Options You can attach mounting accessories to the LCD monitor in one of the Ventilation Requirements for enclosure following two ways: mounting To allow heat to disperse, leave space between surrounding objects as shown in the diagram to the right. 1. In the upright position MLM300 100 * 100 100 100 100 EXIT INPUT MUTE *Ambient temperature should be less than 40 deg C 2. Lay the screen face down Protective Sheet To avoid falling down Fasten the LCD monitor to a wall using a cord
Résumé du contenu de la page N° 7
Parts Name and Functions Control Panel MLM400 9 10 Button Location EXIT INPUT MUTE 8 7 6 5 4 3 2 1 7 POWER button ( ) DOWN ( ) button 1 Switches the power on/off. See also page 17. Activates the on-scren menu when the on-screen menu is turned-off. NOTE: The Main Power Switch must be in the ON position for this Acts as button to move the highlighted area down to select the adjust- button to work. ment with on-screen menu. 2 MUTE button EXIT button 8 Activates the on-screen menu when th
Résumé du contenu de la page N° 8
SPEAKER OUT RS232 L+ L- R- R+ Parts Name and Functions –continued Terminal Panel 10 9 8 5 AUDIO VIDEO RGB OUT VIDEO IN OUT IN 3 IN 2 OUT RG B H V L R R/Cr/Pr G/Y B/Cb/Pb H V RGB 2 (D-SUB) RGB 1 (DVI-D) AUDIO 1 S-VIDEO IN IN RGB3 DVD/HD IN PC IN 7 4 3 2 1 6 AC IN connector 6 AUDIO IN 1,2,3 1 Connects with the supplied power cord. To input audio signal from external equipment such as a computer, VCR or DVD player. RGB 1 IN (DVI-D) 2 To input digital RGB signals from a computer having a digital RGB
Résumé du contenu de la page N° 9
Parts Name and Functions –continued Wireless Remote Control 7 VOLUME UP button 5 4 3 Increase the audio output level. VOLUME DOWN button 8 Decrease the audio output level. 9 PIP (Picture In Picture) button 1 ON/OFF button: Toggle switches between PIP-ON/ POP-ON/OFF. INPUT button: Select the ‘picture in picture’ input signal. 2 CHANGE button: Replaces to the main picture and sub picture. 6 Sub Picture 9 R2 GB1R3 GBRD GBDO VD/H VIDE 7 ___ RGB1 ✓✓ 10 8 ___ _ RGB2 ✓ 13 11 ___ _ RGB3 ✓ 14 __ ___ DVD/
Résumé du contenu de la page N° 10
Parts Name and Functions –continued Operating Range for the Remote Control Caution Point the top of the remote control toward the LCD monitor's remote The remote control system may not function when direct sunlight or sensor during button operation. strong illumination strikes the remote control sensor of the LCD moni- Use the remote control within a distance of about 7 m/23 ft. from the tor, or when there is an object in the path. front of the LCD monitor's remote control sensor and at a hori-
Résumé du contenu de la page N° 11
Setup Procedure 1. Determine the installation location 6. Operate the attached external equipment CAUTION Display the signal on the external equipment you wish. Installing your LCD display must be done by a qualified technician. 7. Adjust the sound Contact your dealer for more information. Make adjustments when adjustment of the volume is required. 8. Adjust the screen (See pages 19-27) CAUTION MOVING OR INSTALLING THE LCD MONITOR MUST BE DONE BY Make adjustments when adjustment of the screen di
Résumé du contenu de la page N° 12
Connections Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Wiring Diagram Wiring Diagram Personal computer LCD monitor VCR Audio signal of input device DVD player Equipment with digital interface EXIT INPUT MUTE Personal computer HD or laser disc player LCD monitor (second monitor) Mounting Position of Ferrite Core Attaching the Ferrite Core Attach the Ferrite Co
Résumé du contenu de la page N° 13
Connections –continued Connecting the LCD Monitor to a PC Connecting your computer to your LCD monitor will enable you to display your computer's screen image. Some video cards may not display an image correctly. •To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the provided RGB signal cable (mini D-sub 15 pin to mini D-sub 15 pin). •To connect the RGB 3 DVD/HD IN connector (BNC) on the LCD monitor, use a signal cable (mini D-sub 15 pin to BNC x 5). Select RGB 3 fro
Résumé du contenu de la page N° 14
Connections –continued ® Connecting to a Macintosh Computer ® Connecting your Macintosh computer to your LCD monitor will enable you to display your computer's screen image. Some video cards or drivers may not display images correctly. •To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the provided RGB signal cable (mini D-sub 15 pin to mini D-sub 15 pin). ® For older Macintosh computers, use Macintosh cable adapter to connect to your Macintosh's video port. NOTE: To
Résumé du contenu de la page N° 15
Connections –continued Connecting to a Computer with a Digital Output Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard. • The RGB 1 IN connector also accepts a DVI-D cable. • Input TMDS signals conforming to DVI standards. •To maintain display quality, use a cable recommended by DVI standards. • The AUDIO IN 1, 2 and 3 can be used for audio input. For connection, select AUDIO 1, 2 or 3 from the AUDIO INPUT
Résumé du contenu de la page N° 16
Connections –continued Connecting to a VCR or Laser Disc Player Connecting your VCR or laser disc player to your LCD monitor will enable you to display your VCR or laser disc player video. Refer to your VCR or laser disc player owner's manual for more information. •Video signals can be connected to either the VIDEO IN [RCA or BNC] or the S-VIDEO IN connector. NOTE: If S-VIDEO and RCA are both connected, S-VIDEO will have priority. •Video output will be from the OUT connector that has been set h
Résumé du contenu de la page N° 17
Connections –continued Connecting to a DVD Player Connecting your DVD player to your LCD monitor will enable you to display your DVD video. Refer to your DVD player owner’s manual for more information. •To connect the RGB 3 DVD/HD In connector (BNC) on the LCD monitor, use a separately available BNC connector cable. You will need a BNC- to-RCA adapter to connect a DVD player with an RCA pin jack to the BNC connector cable (not provided). Some DVD players may have different connectors, such as C
Résumé du contenu de la page N° 18
Connections –continued Connecting to a Stereo Amplifier You can connect your stereo amplifier to your LCD monitor. Refer to your amplifier owner's manual for more information. •Turn on the LCD monitor and the amplifier only after all connections have been made. • Use an RCA cable to connect the AUDIO OUT connector (RCA) on the LCD monitor and the audio input on the amplifier. • Do not reverse the audio left and right jacks. • The AUDIO IN 3 is used for audio input. • The AUDIO OUT jack outputs s
Résumé du contenu de la page N° 19
Basic Operation –Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on or red in off mode. The monitor can be powered on or off using the following three options: MLM400 1. Pressing the power button. NOTE: Before operating the remote control, be sure to turn on the Main Power Switch on the LCD monitor. Power Button MLM400 2. Using the remote control NOTE: Before operating the remote control, be sure to turn on the Main Power Switch on the LCD monitor. 3. Pres
Résumé du contenu de la page N° 20
Basic Operation –continued Power Indicator On-screen Menu Information RGB1, 2, 3 Power Indicator Status RGB2 Video Input mode 1024 x 768 Input signal Information Power ON Green ) 48kHz 60Hz Power OFF Red AUDIO : 1 Audio input mode SCREEN SIZE : FULL Picture Size mode Power Standby Red and Green DVD/HD When Using Power Management Function DVD/HD Video Input mode AUDIO : 3 Audio input mode The LCD monitor follows the VESA approved DPMS Power Manage- SCREEN SIZE : WIDE Picture Size mode ment
