ページ1に含まれる内容の要旨
Color profile: Disabled
Composite Default screen
MPH 6928
900 MHz Cordless
Phone with Caller ID
C:...6928 cover.vp
Fri Oct 29 13:34:40 1999
REFERENCE
GUIDE
ページ2に含まれる内容の要旨
Color profile: Disabled Composite Default screen CONTENTS Introduction Important Safety Instructions ..................2 Introduction ................................4 • Welcome.......................................4 • Features .......................................4 • Included in Your Package..........................5 • Important Electrical Considerations ..................6 Installing and Adjusting Your Phone .............8 Installing and Adjusting • Installation Considerations............
ページ3に含まれる内容の要旨
Color profile: Disabled Composite Default screen IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Use a dry cloth for cleaning without liquid or aerosol cleaners. 4. Do not use this product
ページ4に含まれる内容の要旨
Color profile: Disabled Composite Default screen D. If the product does not operate normally when following the operating instructions. (Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive repair work by a qualified technician.) E. If the product has been dropped or the cabinet has been damaged. F. If the product exhibits a distinct change in performance. 13. Do not use the telepho
ページ5に含まれる内容の要旨
Color profile: Disabled Composite Default screen WELCOME Congratulations on your purchase of the Memorex MPH 6928 cordless telephone. This phone is designed for reliability, long life, and outstanding performance. FEATURES • 900 MHz Technology • Call Waiting Caller ID • 3-line Backlit Display • 30 Number Caller ID Memory • Face Up/Face Down Charging • 10 Memory Dial Locations • 32 Digit Redial • Pulse/Tone Dialing • Page • 7 Hour Talk Time • Handset Earpiece and Ringer Volume Control • Hearing
ページ6に含まれる内容の要旨
Color profile: Disabled Composite Default screen INCLUDED IN YOUR PACKAGE TIP To get the most from your phone, please read this reference guide thoroughly. Handset Base Rechargeable Battery Telephone Cord AC Adapter 5 C:...MPH6928 VA OM.vp Mon Feb 14 15:27:21 2000
ページ7に含まれる内容の要旨
Color profile: Disabled Composite Default screen IMPORTANT ELECTRICAL CONSIDERATIONS Unplug all electrical appliances when you know an electrical storm is WARNING approaching. Lightning can pass through your household wiring and damage any device connected to it. This phone is no exception. Please do not attempt to unplug any appliance during an The FCC Wants You To Know electrical storm. Changes or modifications to this product not expressly approved by the manufacturer, or operation of this p
ページ8に含まれる内容の要旨
Color profile: Disabled Composite Default screen Radio Interference Radio interference may occasionally cause buzzing and humming in your cordless handset, or clicking noises in the base. This interference is caused by an external source such as a TV, refrigerator, vacuum cleaner, fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If these noises continue and are too distracting, please check around your home to see what appliances may be causing the problem. In addition, we
ページ9に含まれる内容の要旨
Color profile: Disabled Composite Default screen INSTALLATION CONSIDERATIONS Selecting a Location Before choosing a location for your new phone, there are some important guidelines you should consider: • The location should be close to both a phone jack and continuous power outlet. (A continuous power outlet is an AC outlet which does not have a switch to interrupt its power.) • Keep the base and handset away from sources of electrical noise such as motors or fluorescent lighting. • Be sure the
ページ10に含まれる内容の要旨
Color profile: Disabled Composite Default screen Connecting the Telephone Cords Consider these safety guidelines before connecting the telephone cords: Place the power cord so that Caution! it does not create a trip • Never install telephone wiring during a lightning storm. hazard or where it could become chafed and create • Never touch uninsulated telephone wires or terminals unless the an electrical hazard telephone line has been disconnected. or fire. • Use caution when installing or modifyi
ページ11に含まれる内容の要旨
Color profile: Disabled Composite Default screen DESK/TABLETOP INSTALLATION 1) Plug the AC adapter cord into the DC input jack on the back of TIP the base, then place the AC adapter cord inside the molded When choosing a location for strain relief. your phone, keep the base unit and the handset away from electrical noise caused by objects like motors and fluorescent lighting. 2) Plug one end of the long telephone cord into the TEL LINE jack on the base, then place the telephone cord into the ri
ページ12に含まれる内容の要旨
Color profile: Disabled Composite Default screen 4) Plug the AC adapter into a standard 120 VAC wall outlet. Place the power cord so that it does not create a trip hazard or where it could become chafed and create an electrical hazard Use only the AC adapter supplied with this phone and or fire. DO NOT use an outlet controlled by a wall switch. 5) Raise the antenna to a vertical position. HINT Before using your phone, fully charge the Nickel- Cadmium battery pack for 15-20 hours. WALL INSTALLAT
ページ13に含まれる内容の要旨
Color profile: Disabled Composite Default screen 2) Flip the handset retainer over so the tab is facing up. 3) Slide the handset retainer back onto the base. ! DO NOT use an outlet controlled by a wall switch. t Standard Wall Plate Mounting This phone can be mounted on any standard AT&T or GTE wall plate. ! 1) Plug the AC adapter into the DC Before you plug the other end input jack on the back of the of the telephone cord into the base, then place the AC adapter modular jack on the wall, cord i
ページ14に含まれる内容の要旨
Color profile: Disabled Composite Default screen 3) Plug the other end of the cord into the wall jack. (Remember, the phone must be fully charged before you can use it.) 4) Place the base on the two posts of the wall plate and slide it downward to secure. 5) Plug the AC adapter into a standard 120 VAC wall outlet that is not controlled by a wall switch. 6) Raise the antenna on the base. 13 C:...MPH6928 VA OM.vp Mon Feb 14 15:27:29 2000
ページ15に含まれる内容の要旨
Color profile: Disabled Composite Default screen t Direct Wall Mounting If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before mounting your cordless telephone, consider the following: • Select a location away from electrical cables, pipes, or other items behind the mounting location. Inserting screws into areas such as this can be hazardous. • Try to mount your phone within 10 - 15 feet of a working phone jack in order to avoid excessive cord length. Rem
ページ16に含まれる内容の要旨
Color profile: Disabled Composite Default screen 4) Plug one end of the long telephone cord into the TEL LINE jack on the back of the base and place the telephone cord into the right molded channel cord holder. 5) Place the base on the screws and push it downward to secure. 6) Plug the other end of the telephone cord into the wall jack. 15 C:...MPH6928 VA OM.vp Mon Feb 14 15:27:31 2000
ページ17に含まれる内容の要旨
Color profile: Disabled Composite Default screen 7) Plug the AC adapter into a standard 120 VAC wall outlet that is not controlled by a wall switch. 8) Raise the antenna on the base. 16 C:...MPH6928 VA OM.vp Mon Feb 14 15:27:32 2000
ページ18に含まれる内容の要旨
Color profile: Disabled Composite Default screen INSTALLING THE HANDSET BATTERY PACK 1) Remove the handset battery cover by pressing in on the cover release and sliding it downward. 2) Plug the battery’s cable into the handset. ! Use only the battery (BT-905) supplied with your phone. 3) Slide the battery cover on until it snaps into place. 17 C:...MPH6928 VA OM.vp Mon Feb 14 15:27:33 2000
ページ19に含まれる内容の要旨
Color profile: Disabled Composite Default screen CHARGING THE BATTERY PACK t Initial battery charging Before plugging the phone line into your new phone for the first time, fully charge the rechargeable battery pack for 15-20 hours without interruption. 1) Place the handset on the base. 2) Make sure that STATUS LED lights. If the LED doesn’t light, check to see that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts. t Low battery indicator When
ページ20に含まれる内容の要旨
PULSE-TONE Color profile: Disabled Composite Default screen SETTING THE PULSE/TONE SWITCH TIP Be sure the PULSE/TONE switch is in the TONE position unless your Most phone systems use tone local phone system uses pulse dialing. dialing. Check with your local phone company if you’re not sure whether your system is tone or pulse. ADJUSTING THE RINGER AND VOLUME CONTROLS t Handset Ringer Tone and Volume Your MPH 6928 lets you choose from Ring Type B two ringer tones, Type A and Type B. High Each to
