ページ1に含まれる内容の要旨
MPH7828
Congratulations on your selection of the MPH7828 from
¨
Memorex . This quality 2.4GHz cordless telephone with Caller
¨
ID and Call Waiting, like all Memorex products, has been
designed to give you many years of continuous service and
represents the best value for your money. It requires little
maintenance and is easy to setup and operate.
ページ2に含まれる内容の要旨
IMPORTANT SERVICE INFORMATION Read this manual before attempting to setup or use this instrument. It contains important information regarding safe installation and use. Keep this manual for future reference. Also save the carton, packing and proof of purchase to simplify and accelerate any needed action. If you need assistance or service, call 1-800-919-3647. You can also visit our web site at: http://www.memcorpinc.com for technical support and information on our other products. WARNING To prev
ページ3に含まれる内容の要旨
CARTON CONTENTS RECHARGEABLE Ni-Cd HANDSET BASE UNIT BATTERY PACK TELEPHONE LINE ADAPTER WALL MOUNT CORD (DC9V, 300mA) BRACKET (Short & Long) MPH7828 USERÕS MANUAL BELT CLIP 2
ページ4に含まれる内容の要旨
SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this pro
ページ5に含まれる内容の要旨
SAVE THESE INSTRUCTIONS BATTERY SAFETY INSTRUCTIONS CAUTION: To reduce the risk of fire or injury to persons, read and follow these instructions: 1. Use only the following type and size of handset battery pack: Cordless Telephone Battery Pack DC3.6V, 800mAh, Ni-Cd Battery Pack 2. Do not dispose of the battery in a fire. The cell may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause d
ページ6に含まれる内容の要旨
FCC NOTICE The FCC requires that you be advised of certain requirements involving the use of this telephone. 1. This telephone is Hearing Aid Compatible. 2. This equipment complies with Part 68 of the FCC rules. On the bottom of this equip- ment is a label that contains, among other information, the FCC registration number and Ringer Equivalence Number (REN) for this equipment. If requested, provide this information to your telephone company. 3. The REN is useful to determine the quantity of dev
ページ7に含まれる内容の要旨
TABLE OF CONTENTS IMPORTANT SERVICE INFORMATION ...........................................................................1 CARTON CONTENTS ......................................................................................................2 IMPORTANT SAFETY INSTRUCTIONS ...........................................................................3 BATTERY SAFETY INSTRUCTIONS ................................................................................4 INSTALLATION PRECAUTIONS .............
ページ8に含まれる内容の要旨
GETTING TO KNOW YOUR NEW PHONE IMPORTANT: Subscription to Caller ID (CID) / Call Waiting ID services from your local phone company is required for using the Caller ID / Call Waiting ID features of the unit. Your new telephone gives you the ultimate in cordless telephone sound quality with the luxury of Caller ID and Call Waiting ID. If this is your first cordless telephone, you will soon discover that your cordless is similar to regular telephones, except without the cord. If you have owned a co
ページ9に含まれる内容の要旨
DESCRIPTION CONTROLS' LOCATION AND FUNCTION 17 1 16 15 2 3 14 4 5 13 6 12 7 11 10 8 9 (Figure 1) HANDSET CONTROLS 1. LCD Display: Shows the phone status, Caller ID Call Record information and function menus. 2. TALK Button: Press to answer an incoming call, place a call or end a call. 3. MEMO (Memory) Button: Used for storing / retrieving phone numbers to / from the 20 Memory Dialing Directory. 4. TONE ( * ) Button: Used to temporarily change the dialing mode from pulse to tone for rota
ページ10に含まれる内容の要旨
13. # /(Shift Right) Button: In program, memory and predial mode, it is used for chang- ing mode and moving the cursor to the right during edit mode. 14. Headset Jack: For headset connection at hands free conversation. 15. SCAN / PRG (Program) Button: In talk mode, it allows you to change channels if the current channel is noisy or having interference from other sources. In standby mode, it allows you to enter and store program function. 16. NEW CALL LED Indicator: Flashes if the system has new
ページ11に含まれる内容の要旨
MOUNTING POSITION DESKTOP USE: Connect the telephone line cord to the TEL LINE jack on the rear of the base unit and connect the opposite end to the telephone modular jack. (Figure 3) WALL USE: A. WITH A STANDARD MODULAR WALL JACK 1. Install the wall mount bracket at the position as shown in Figure 4. 2. Connect the short telephone line cord to the TEL LINE jack on rear of the base unit. 3. Connect the opposite end of the telephone line cord to the modular wall jack. 4. Align the wall mounting
ページ12に含まれる内容の要旨
BELT CLIP INSTRUCTION Clamp the belt clip at the back of the handset as shown in Figure 7. Belt Clip (Figure 7) CONNECTING THE HEADSET For hands free conversation, a headset (not included) is connected to the headset jack as shown in Figure 8. The handset receiver and microphone are disabled when the headset is connected. Headset Jack Headset Plug (2.5mm) (Figure 8) Press the TALK button to answer or place a call when using the headset. Refer to the manufacturer's headset manual for more details
ページ13に含まれる内容の要旨
9VDC Adapter Jack Telephone Modular Jack AC Wall Outlet Line Cord Plug 9VDC Adapter (Figure 9) HANDSET BATTERY INSTALLATION CAUTION: Use only the Nickel Cadmium (Ni-Cd) battery type included with this unit. Use of other battery types may cause injuries or damage. 1. Remove the battery compartment cover of the handset. 2. Connect the rechargeable Ni-Cd battery as shown on Figure 10. Insert the End of the Handset Battery Pack Wire Battery Compartment RED Wire BLACK Wire (Figure 10) 3. Insert the N
ページ14に含まれる内容の要旨
SETTING USER'S AREA CODE AND NEIGHBORING AREA CODE In order to use callback function, the user's area code and neighboring area code must be programmed. Neighboring area code is optional. See PROGRAMMING MODE section on page 19. SETTING THE CALLER ID CALL WAITING (CIDCW) FUNCTION The CIDCW function must be set to ON position in order to use CIDCW function. See PROGRAMMING MODE section on page 19. TELEPHONE OPERATION TO PLACE A CALL IN TALK MODE 1. Press the TALK button on the handset. The LCD D
ページ15に含まれる内容の要旨
B. WHEN THE HANDSET IS OFF THE BASE UNIT AND IN STANDBY MODE 1. Press the TALK button on the handset and listen for a dial tone. 2. Press the RE / PA button. This will automatically redial the last telephone number you called (Up to 31 digits). STORING TELEPHONE NUMBERS INTO MEMORY DIALING DIRECTORY In addition to your Call Records, you can store up to 20 speed dial names and telephone numbers into memory and you can then dial any of the stored phone numbers. You can also transfer a Call Record
ページ16に含まれる内容の要旨
B. STORING TELEPHONE NUMBERS INTO MEMORY DIALING DIRECTORY FROM THE CALLER ID CALL RECORDS 1. Make sure that the unit is in the standby mode. The base unit IN USE LED indicator should be off. 817-456-7890 2. Locate the Call Record that you want to copy by pressing (+) or (-) button. NAME 3. Press MEMO button. 817-456-7890 If there is an empty slot, the Call Record is saved automatically SAVE TO #10 and you can see the saved memory location on the screen. Example saved at memor
ページ17に含まれる内容の要旨
2. Press the TONE ( * ) button once to switch from Pulse to Tone dialing temporarily. Pulse dialing mode resumes when the call is ended. PAUSE FUNCTION ¥ ¥ ¥ In some cases, such as PABX or long distance service, a pause may be needed in the ¥ ¥ dialing sequence. Pressing the handset RE / PA button inserts a four-second delay between dialed numbers. FLASH FUNCTION ¥ ¥ ¥ ¥ ¥ Used to access custom calling features such as Call Waiting or Three-Way Calling provided by your local phone company. Flas
ページ18に含まれる内容の要旨
CALLER ID OPERATION IMPORTANT: Subscription to Caller ID (CID) service from your local phone company is required for using the Caller ID features of the unit. Other optional services such as Mes- sage Waiting and Caller ID Call Waiting can be ordered from your local phone company. RECEIVING NEW CALL ¥ ¥ ¥ ¥ ¥ When you receive a new call, the call information is stored NEW under CALLER ID Call Record. In standby mode, you can ALL:10 NEW:05 find how many calls and new calls you have. The "NEW" se
ページ19に含まれる内容の要旨
2. Press DELETE button once and the unit asks if you want to DELETE ALL? delete all Call Records. 3. Press DELETE button again to delete all Call Records. If you do not wish to delete all numbers, press (+) or (-) button to cancel. DELETED! CALLBACK FROM CALL RECORDS A. CALLBACK OPTION 1 817-456-7890 In this option, Callback dial is same as shown on the LCD Display. NAME 1. In standby mode or talk mode, press (+) or (-) button to see your Call Record on the LCD Display. 2. Find the desired Cal
ページ20に含まれる内容の要旨
PROGRAMMING MODE A. SUMMARY OF FUNCTION MODE Function Code Mode Language Set (English, Spanish, French) 1 CIDCW ON / OFF Set 2 Area Code Set including Neighboring Area Code 3 Callback Number Set (07, 10) 4 Ringer ON / OFF Set 5 6 Time Set Contrast Set (3 steps) 7 B. HOW TO CHANGE THE LANGUAGE 1. In standby mode, press SCAN / PRG button. ENGLISH 2. Press 1 button, or press (+) button once. The current language is displayed. 3. Press or button to change the language. The language scrolls as E
