ページ1に含まれる内容の要旨
Internet Camera
ICA-210 / ICA-210W
User’s Manual
Version 1.0
ページ2に含まれる内容の要旨
Copyright Copyright (C) 2006 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed products of PLANET Technology, This User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all accompanying hardware, software, and documentation are copyrighted. No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable
ページ3に含まれる内容の要旨
WEEE Notice To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment, end users of electrical and electronic equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately. Trademarks The PLANET logo is a trademark of PLANET Technology. This documentation may refer to numerous
ページ4に含まれる内容の要旨
TABLE OF CONTENTS ABOUT THIS GUIDE ...................................................5 INTRODUCTION............................................................6 GENERAL FEATURES AND BENEFITS ................................................... 7 UNPACKING THE PACKAGE ................................................................. 9 SYSTEM REQUIREMENT..................................................................... 10 PHYSICAL DESCRIPTION...............................................
ページ5に含まれる内容の要旨
E. ADJUSTING THE CAMERA FOCUS .................................................. 87 F. SPECIFICATION.............................................................................. 88 G. GLOSSARY OF TERMS ................................................................... 90 4
ページ6に含まれる内容の要旨
ABOUT THIS GUIDE This manual provides instructions and illustrations on how to use your Pan/Tilt Wireless Internet Camera, includes: Chapter 1, Introduction, provides the general information on the camera. Chapter 2, Hardware Installation, describes the hardware installation procedure for the camera. Chapter 3, Security, explains the security feature of the camera. Chapter 4, Application of the Camera, provides the illustrations of the camera’s applications. Chapter 5, Using the
ページ7に含まれる内容の要旨
1 INTRODUCTION Thank you for purchasing the ICA-210/ICA-210W Wired /Wireless Internet Camera, a camera device that can be connected directly to an Ethernet or Fast Ethernet network and also supported by the wireless transmission based on the IEEE 802.11g standard. Compared to the conventional PC camera, the Internet Camera features a built-in CPU (central processing unit) and web-based solutions that can provide a cost-effective solution to transmit the real-time high-quality video im
ページ8に含まれる内容の要旨
General Features and Benefits Simple to Use The ICA-210/ICA-210W is a standalone system with built-in CPU requiring no special hardware or software such as PC frame grabber cards. Allows remote access from web browser for live image/Audio viewing and listen. Use Internet Explorer 5.0 or above to view image online. Just plug and view the picture from your ICA-210/ICA-210W with a valid IP Address. Support Variety of Network usage The ICA-210/ICA-210W supports TCP/IP networking, UPnP
ページ9に含まれる内容の要旨
Remote Utility The powerful IPView Pro application allows the administrator to modify the ICA-210/ICA-210W settings from the remote site via Intranet or Internet. When new firmware is available, you can also upgrade remotely over the network for added convenience. Users are also allowed to monitor the image, and take snapshots / motion detection with alert and e-mail sending / recording triggered by Motion Detection, Schedule, and Manual. Broad Range of Applications With today’s h
ページ10に含まれる内容の要旨
Unpacking the Package Unpack the package and check all the items carefully. Be certain that you have: One ICA-210 or ICA-210W Internet Camera. One RJ-45 Ethernet Cable One Camera Stand One AC power adapter One Installation CD-ROM One Quick Installation Guide If any item contained is damaged or missing, please contact your local dealer immediately. Also, keep the packing materials and box in case you need to ship the units in the future. 9
ページ11に含まれる内容の要旨
System Requirement Networking LAN: 10Base-T Ethernet or 100Base-TX Fast Ethernet. WLAN: IEEE 802.11g Wireless LAN with internal chip antenna.(ICA-210W) Accessing the Camera For Web Browser Users OS: Microsoft® Windows® 98SE/ME/2000/XP CPU: Intel Pentium III 350MHz or above Memory Size: 128MB Resolution: 800x600 or above Microsoft® Internet Explorer 5.0 or above For IPView Pro Application Users OS: Microsoft® Windows® 98SE/ME/2000/XP. CPU: Intel Pentium III 650MHz or abov
ページ12に含まれる内容の要旨
Physical Description This section provides the illustration of the camera and explains the function of each component. Front and Side View 6. 7. 1. 2. 8. 9. 10. 3. 11. 4. 12. 5. 1. Internal MIC The built-in omni-directional microphone allows the camera to receive sound and voice. 11
ページ13に含まれる内容の要旨
2. ACCESS LED The ACCESS LED indicates the system status by: - Green light on: The camera is powered on. - Green light flashing: The camera is receiving/sending data from/to the LAN. - Orange light flashing slowly: The camera is in Privacy mode. 3. PIR Sensor The PIR Sensor allows you to monitor the target area dynamically. To use this motion detection function, you have to enable this sensor from the web configuration page. 4. Camera Lens 5. Compensative Flash LED This Flash
ページ14に含まれる内容の要旨
8. STATUS LED The STATUS LED indicates the configuration status by: - Green light flashing: The camera is powered on and works in normal mode. - Orange-Red light flashing: Indicates the camera cannot access DHCP within the network. 9. Privacy Mode Button Press this button to enter the camera’s privacy mode; this makes the camera stop monitoring temporarily until it releases from the privacy mode. 10. Network Cable Connector This RJ-45 connector is used to connect the 10Base-T Ethe
ページ15に含まれる内容の要旨
Rear and Bottom View (without the Camera Stand) 3. 1. 2. 1. Screw Hole The screw hole can be used to attach the camera stand or a tripod. 2. Reset Button Press the button to reboot the camera; press and hold the button for 5 second will reload the factory default settings for the camera. The button works as the function in Web Configuration Utility > Setting menu > Maintenance > Reboot or Factory reset. When you perform a factory reset and try to re-login into the camera, the de
ページ16に含まれる内容の要旨
3. Hanging Hole The two holes on the rear panel of the camera allow you to place the camera on the wall. 15
ページ17に含まれる内容の要旨
2 HARDWARE INSTALLATION Connecting to LAN and Power To connect the camera to your network, connect an Ethernet cable to the LAN connector located on the camera’s side panel, and then attach it to the network device. To provide power to the camera, connect the AC power adapter to the DC power input connector located on the camera’s side panel, and then plug it to the electrical outlet. Connect to LAN Connect to power 16
ページ18に含まれる内容の要旨
Installing the Camera Stand If you want to place the camera on the flat surface, instead of hanging on the wall, you have to install the camera stand onto the bottom part of the camera. The following describe the installation procedure of the camera stand: 1. Align the camera stand with the bottom part of the camera. Then, secure the camera stand with the screw. 2. Place the camera on a flat surface, and connect the Ethernet cable and AC power adapter as described in the previous sec
ページ19に含まれる内容の要旨
3 SECURITY To ensure the highest security and prevent unauthorized usage of the camera, the administrator has the exclusive privilege to access the System Administration for settings and control requirements to allow users the level of entry and authorize the privileges for all users. The camera supports multi-level password protection. Accessing to the camera is strictly restricted to defined users with a "User Name" and "User Password", which are assigned by the administrator. The
ページ20に含まれる内容の要旨
4 APPLICATIONS The ICA-210/ICA-210W can be applied in wide variety of applications. With the built-in CPU, it can work as a standalone system that provides a web-based solution transmitting high quality video images and sounds for monitoring purposes. It can be managed remotely, accessed and controlled from any PC desktop over the Intranet or Internet via a web browser. With the easy installation procedure, real-time live images will be available. In addition, once the ICA-210/ICA-
