Hobart Corp.FT900の取扱説明書

デバイスHobart Corp.FT900の取扱説明書

デバイス: Hobart Corp.FT900
カテゴリ: 食器洗い機
メーカー: Hobart
サイズ: 2.9 MB
追加した日付: 10/10/2013
ページ数: 28
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスHobart Corp.FT900の取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Hobart Corp.FT900に関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Hobart Corp.FT900をこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Hobart Corp.FT900のフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Hobart Corp.FT900の説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Hobart Corp.FT900 取扱説明書 - Online PDF
Advertisement
« Page 1 of 28 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Hobart Corp.FT900を全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Hobart Corp.FT900の内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

FT900 SERIES DISHWASHERS
MODELS ML-110668-U covers all of the following models:
FT900
FT900BD
FT900S
FT900SBD
FT900D
FT900DBD
FT900SD
FT900SDBD
FT950
FT950BD
701 s. RIDGE AVENUE
TROY, OHIO 45374-0001
937 332-3000
www.hobartcorp.com FORM 44095 Rev. B (Jan. 2013)

ページ2に含まれる内容の要旨

TABle OF COnTenTs OpERATION .................................................................3 Machine preparation ......................................................3 Tank Filling ..............................................................4 Dishwashing .............................................................5 Empty strainer Baskets During Operation as Necessary ........................... 6 Loading .................................................................6 Unloading ...

ページ3に含まれる内容の要旨

Operation and Care of FT900 seRIes DIsHWAsHeRs sAVe THese InsTRUCTIOns OPeRATIOn MACHIne PRePARATIOn — Check before beginning operation. Open the machine doors and make sure all components are in their proper operating positions. pump Intake screens must be put on strainer pans must be in place on top of strainer Baskets must be in place in holders at each pump intake (Fig. 1). each tank (Fig. 2). strainer pans (Fig. 3). Fig. 1 Fig. 2 Fig. 3 End Caps must be correctly installed at Wash Arms mus

ページ4に含まれる内容の要旨

TAnK FIllInG Assure proper water hardness. Recommended water hardness is 3 grains or less per gallon. Higher hardness may cause excessive formation of lime scale. Chlorides must not exceed 50 ppm. All water (and steam, if equipped) supply valves must be opened and the electric supply turned on before the machine will function. Close all drains and doors. The drain handles are located near the floor at the front of each tank. Rotate drain handles clockwise to the vertical position. The prewash

ページ5に含まれる内容の要旨

DIsHWAsHInG sTOP (red) and sTART (green) switches start the motors for the conveyor, pumps and blower-dryer (push-button) are located on the load and (if equipped) by pressing the green sTART switch located unload ends of the machine. at either the load or unload end of the machine (Fig. 10) or on the control box (Fig. 11). The machine will operate only if the tanks have filled to the proper level and all doors are closed. press the red sTOp switch (Fig. 10 or 11) to stop STOP (red

ページ6に含まれる内容の要旨

eMPTy sTRAIneR BAsKeTs DURInG OPeRATIOn As neCessARy The Strainer Baskets must be emptied periodically during operation to prevent them from over filling, which would adversely affect dishwasher operation. sTOp the machine and open the access doors; strainer Baskets are immediately inside at the front of the tanks. On Dual Rinse machines (FT900D or FT900sD) the strainer pan is located inside the machine behind the control box area. Remove and clean the strainer pan periodically. lOADInG Pre-

ページ7に含まれる内容の要旨

CleAnInG The dishwasher MUsT be thoroughly cleaned at the end of each working shift or after each meal. push the power key on the keypad to turn the machine OFF. Disconnect electrical power supply(ies) and follow lockout / tagout procedures before you begin cleaning. Open all front access doors. Drain the machine by rotating the drain handles counterclockwise to a horizontal position. Drain handles are located near the floor at the front of each tank. On Dual Rinse machines (FT900D or F

ページ8に含まれる内容の要旨

When tanks are empty, remove pump intake screens (Fig. 22) and clean them in a sink. Remove, clean and replace the strainer(s) from drainback pans in the power rinse and / or wash section(s) where present (Fig. 23), refer to pages 11–14. Remove the dual rinse arms (FT900D or FT900sD only). Clean debris from metal dual rinse nozzles and arms using a straightened paper clip (Fig. 24). Do not attempt to clean Opti-Rinse final rinse nozzle(s). Opti-Rinse nozzle(s) should be replaced if they b

ページ9に含まれる内容の要旨

CleAnInG THe TOP DUCT Disconnect electrical power supply(ies) and follow lockout / tagout procedures before you begin cleaning. Debris and airborne particles will settle on the Top Covers and the surfaces inside the Top Duct. The Top Duct should be cleaned about every two weeks, as appropriate for your location. There are two handles on each of the removable Top Covers so they can be lifted or moved to access the inside of the Top Duct for cleaning (Fig. 29). Before draining and cleanin

ページ10に含まれる内容の要旨

CleAnInG THe BlOWeR-DR yeR AIR FIl TeR At least twice each month, the air filter (when present, Fig. 30) on the blower-dryer should be removed and cleaned in a sink with warm soapy water and hosed off with clean water. The air filter can be washed in the dishwasher and flushed with clean water after washing. Replacement air filters are available — contact Hobart service. BLOWER-DRYER FILTER LIFT UP AND PULL FORWARD TO REMOVE R – l OPeRATIOn sHOWn Fig. 30 DOs AnD DOn'Ts FOR yOUR neW HO

ページ11に含まれる内容の要旨

CURTAIns AnD DRAInBACK PAns, MODel FT900 AnD FT950 Curtains and drainback pans must be in their proper places, Fig. 31 . . . • Hang a short curtain on the unload side of each upper prewash, wash and power rinse arm. • Hang a long curtain on both sides of every section joint. • Hang two long curtains at the load end. • Hang one long curtain at the unload end. • Drainback pan locations are shown for reference only. Fig. 31 – 11 –

ページ12に含まれる内容の要旨

CURTAIns AnD DRAInBACK PAns, MODel FT900D Curtains and drainback pans must be in their proper places, Fig. 32 . . . • Hang a short curtain at the unload side of every upper prewash, wash, power rinse and dual rinse arm. • If equipped with a blower-dryer, hang another short curtain after the final rinse arm. • Hang a long curtain on both sides of the prewash / wash section joint and the wash / power rinse section joint. • Hang two long curtains at the load end. • Hang one long curtain at t

ページ13に含まれる内容の要旨

CURTAIns AnD DRAInBACK PAns, MODel FT900s Curtains and drainback pans must be in their proper places, Fig. 33 . . . • Hang a short curtain on the unload side of each upper prewash and wash arm. • Hang a long curtain on both sides of every section joint. • Hang two long curtains at the load end. • Hang one long curtain at the unload end. • Drainback pan locations are shown for reference only. FT900S R TO L OPERATION 4' CENTER SECTION FINAL RINSE ARM WASH ARM PREWASH ARM TWO SHORT CURTA

ページ14に含まれる内容の要旨

CURTAIns AnD DRAInBACK PAns, MODel FT900sD Curtains and drainback pans must be in their proper places, Fig. 34 . . . • Hang a short curtain at the unload side of every upper prewash, wash and dual rinse arm. • If equipped with a blower-dryer, hang another short curtain after the final rinse arm. • Hang a long curtain on both sides of the prewash / wash section joint. • Hang two long curtains at the load end. • Hang one long curtain at the unload end. • Drainback pan locations are shown for

ページ15に含まれる内容の要旨

MACHIne OPeRATIOn AnD PROGRAMMInG seCURITy leVels The advanced digital controls on your dishwasher allow several setup and customization options. Because these options can affect the operation of the machine, they are all locked-out by default from the factory. To unlock them for editing, the security level must be elevated to an appropriate level. It is recommended to keep the dishwasher in the lowest security level possible at all times. This will prevent options from being inadvertently

ページ16に含まれる内容の要旨

UseR PROGRAMMInG InsTRUCTIOns The dishwasher is equipped with electronic digital controls to allow greater precision for cleaning your ware, maintaining required tank temperatures and other advanced functions. some of these functions are customized to suit the needs of your kitchen operation. All customization is performed through the on-screen menu using the Up, DOWN / MENU and sTART / ENTER keys located on the keypad on the control box door (Fig. 35). DISPLAY POWER START or ENTER UP STOP

ページ17に含まれる内容の要旨

entering the Parameters Menu nOTe: The parameters can be changed anytime the display is active, which is when the machine is operating or in idle mode. To enter the parameters menu to edit options: 1) press the MENU key from the main screen. a. You will be prompted on-screen asking if you wish to exit the menu. 2) press the Up or DOWN key repeatedly until you reach the Ent Er SEcurity c od E? screen. 3) press the ENTER key to indicate that you want to enter the code. a. You will now be p

ページ18に含まれる内容の要旨

Parameters Menu The parameters Menu — Table 1 lists the parameter name, a short description, a list of possible values the parameter can have, the factory default value based on the specific dishwasher model and the security level required to access that parameter. PARAMeTeRs MenU — T ABle 1 Parameter Description Model Possible Default security name Values Value Required Conveyor speed Adjusts the speed of the conveyor in feet per FT900 4 – 8.5 8.5 sO minute. Increasing the value can increase

ページ19に含まれる内容の要旨

Communications setup Menu The Communications setup Menu — Table 2 lists the parameter name, a short description, a list of possible values the parameter can have, the factory default value based on the specific dishwasher model and the security level required to access that parameter. COMMUnICATIOns seTUP MenU –— TABle 2 Parameter Description Possible Default security name Values Value Required NAFEM Dp Baud Adjusts the baud rate of communication between the 9600 dishwasher and a NAFEM Data

ページ20に含まれる内容の要旨

MAInTenAnCe Disconnect electrical power supply(ies) and follow lockout / tagout procedures before performing any maintenance procedure. lIne sTRAIneRs Line strainers used in water or steam lines should be cleaned one week after machine installation and periodically thereafter. lUBRICATIOn A list of acceptable lubricants, as well as the lubricants themselves, are available from your local Hobart Service Office. Motors All motors have sealed bearings and require no lubrication maintenanc


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Hobart 380-415/50/3* 取扱説明書 食器洗い機 488
2 Hobart 480/60/3 取扱説明書 食器洗い機 106
3 Hobart ADVANSYS CL64ER 取扱説明書 食器洗い機 53
4 Hobart AM14C ML-32615 取扱説明書 食器洗い機 109
5 Hobart AM14C ML-110977 取扱説明書 食器洗い機 41
6 Hobart 208-240/60/3 取扱説明書 食器洗い機 39
7 Hobart AM14F 取扱説明書 食器洗い機 58
8 Hobart AM14 ML-110976 取扱説明書 食器洗い機 31
9 Hobart AM14 ML-32614 取扱説明書 食器洗い機 101
10 Hobart AM14TC 取扱説明書 食器洗い機 20
11 Hobart AM14T 取扱説明書 食器洗い機 30
12 Hobart AM15T 取扱説明書 食器洗い機 67
13 Hobart AM15 ML-130038 取扱説明書 食器洗い機 120
14 Hobart AM15F ML-130045 取扱説明書 食器洗い機 15
15 Hobart AM15VLF 取扱説明書 食器洗い機 31
16 Edelbrock 1108 取扱説明書 食器洗い機 2
17 2JANE Professional loudspeakers VX Series 取扱説明書 食器洗い機 2
18 2Wire Epson PowerLite Projector 7900P 取扱説明書 食器洗い機 15
19 321 Studios DeviceNet Network Scanner DVP-0204520-03 取扱説明書 食器洗い機 1
20 321 Studios CallManager Extended Services Administrator's Guide 78-12959-01 取扱説明書 食器洗い機 0