Metra Electronics 95-9012の取扱説明書

ページ1に含まれる内容の要旨

INSTALLATION INSTRUCTIONS FOR PART 95-9012
APPLICATIONS
•GOLF 1999-2006
•GTI 1999-2005
•JETTA 1999-2005
(Excluding NEW JETTA 2005)
•PASSAT 2000-2005
95-9012
KIT FEATURES
• Double DIN Head Unit Provision
• Stacked ISO DIN Head Unit Provision
KIT COMPONENTS
A) Radio Housing • B) (8) Phillips screws
B
A
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
• 70-1784 VW harness 1998-2001
• XSVI-9003-NAV VW Interface 2003-up
Antenna adapter:
• 40-EU55-adapter for amplified antenna 2002-up
• 40-VW53 adap

ページ2に含まれる内容の要旨

95-9012 TABLE OF CONTENTS Dash Disassembly - Golf 1999-2006 .... ........ ........ ....... ........ ........ ....... 1 - GTI 1999-2005 .... ........ ........ ....... ........ ........ ....... 1 - JETTA 1999-2005 (Excluding NEW JETTA 2005) . . . . . . . . . . . . . . . . . . . . . . . 1 - PASSAT 2000-2005 .... ....... ........ ........ ....... ........ ....1 Kit Assembly - Double DIN Head Unit Provision . . . ............. .............. ......2 - ISO Stacked Head Unit Provision ..... ........ ..

ページ3に含まれる内容の要旨

95-9012 DASH DISASSEMBLY •GOLF 1999-2006 •GTI 1999-2005 •JETTA 1999-2005 (Excluding NEW JETTA 2005) •PASSAT 2000-2005 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Insert the long ends of the 86-9001 into the slots on the factory radio and pull out to remove. Note: Flat edge of key should point outward. (Figure A) 3 For single DIN radios with the pocket, remove the radio and pocket, then pull out on the plastic tray separating the dash cavity. (Figure B)

ページ4に含まれる内容の要旨

95-9012 KIT ASSEMBLY/ FINAL ASSEMBLY DOUBLE DIN HEAD UNIT PROVISION/ ISO STACKED HEAD UNIT PROVISION A 1 Slide the DDIN radio unit into the DDIN bracket/radio housing assembly and secure the unit to the kit using the (8) Phillips screws supplied with the kit. (Figure A) 2 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 3 Snap kit/ radio assembly i