ページ1に含まれる内容の要旨
User Guide (Ver. 2.4)
Model: D4RS, D8RS, D16RS, D4WRS, D8WRS, D16WRS
4, 8, 16 Channel Digital Video Recorder
About This User’s Guide
Before operating the unit, please read this user‟s guide thoroughly and retain it for future reference.
ページ2に含まれる内容の要旨
Cautions Explanation of Graphical Symbols This symbol indicates the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. This symbol indicates the presence of “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock, property damage, personal injury, or death. WARNING To reduce a risk of fire or electric shock, do not expos
ページ3に含まれる内容の要旨
These Precautions must be Followed for Safety Reasons Warning Do not use if the unit emits smoke. Do not disassemble the unit. Do not place any heavy or sharp objects on the unit. Do not place on uneven surface. Do not expose to shock or vibration. Do not move the unit when the unit is powered on. Do not block, and allow dust to accumulate in the air vents. Do not restrict airflow of the unit; doing so can damage the unit. Only qualified and experienced
ページ4に含まれる内容の要旨
Product Components Please make sure the following components are included as specified below. DVR Unit (D4WRS/D8WRS/D16WRS or D4RS/D8RS/D16RS) Remote Control Battery1.5V (AAA x 2EA) Quick Start Guide Mouse for D4RS/D8RS/D16RS Software & Manual CD Adaptor (DC12V 3A for D4RS/D4WRS, DC12V 5A for D8RS/D16RS/ D8WRS/D16WRS) & Power cable (110V or 220V) Audio Cable for D8RS/D16RS/D8WRS/D16WRS 4
ページ5に含まれる内容の要旨
Specifications ITEM D4RS/D4WRS D8RS/D8WRS 16RS/D16WRS Channel, Input Level 4CH / 8CH / 16CH Composite, 1.0Vp-p, 75ohm Input Signal Format NTSC/PAL Video Loss Check Yes Video VGA 1 VGA (1024x768, 1280x1024) Output CVBS 1 BNC 1 BNC 1 BNC SPOT - 1 BNC 1 BNC Input & Output 4 CH Line input & 1 CH Line output Audio Audio Codec G.711 Sensor Input - 4 (NC / NO Selectable) Sensor/ Alarm Out - 1 Alarm Out by Sensor, Motion and Alarm Video Loss Compression H.264 Multi-operation QUADPLEX
ページ6に含まれる内容の要旨
USB Port 2 (Front 1, Rear 1) USB Flash drive Video & Still Image Backup Network Video & Still Image Huge Backup Yes (up to 24 hours) Menu Display GUI User I/F Input Method Remote control, Mouse RS-485 PTZ control - 1 RS-485 1 RS-485 Dynamic DNS Yes (Free DDNS) 10/100 base-TX Network Interface 10/100/ 1000 base-TX Ethernet (RJ-45) Network Ethernet (RJ-45) Dual Encoding for Network CIF 60fps/50fps CIF 120fps/100fps Streaming Web Viewer (1:1) Live, Search, Backup, Remote Setup, PTZ
ページ7に含まれる内容の要旨
Table of Contents 1. Main Features ............................................................................................................................. 10 2. Initial Boot up Process .................................................................................................................. 11 2-1. Initial Boot up and Basic Time Setup ............................................................................................ 11 2-2. Setting Daylight Saving Time ...............
ページ8に含まれる内容の要旨
5-3-7. Log List ..................................................................................................................................... 50 5-4. Play Mode .................................................................................................................................... 51 6. Back Up .......................................................................................................................................... 52 6-1. Still Image Backup onto USB Flash D
ページ9に含まれる内容の要旨
10-2. App Viewer for Android Phone .................................................................................................... 86 APPENDIX: Network Connection - LAN ............................................................................................. 88 APPENDIX: Network Connection – Internet and DDNS ...................................................................... 90 APPENDIX: E-SATA CONNECTION ...........................................................................
ページ10に含まれる内容の要旨
1. Main Features H.264 Video Compression Reliable File System 4 Channel Audio Recording NOTE: Under federal law, The Fourth Amendment to the U.S. Constitution, Title III of the Omnibus Crime Control and Safe Streets Act of 1968, as amended by the Electronic Communications Privacy Act of 1986 (18 Individual Channel Operation U.S.C. § 2510, et seq.), and the Foreign Intelligence Surveillance Act of 1978 (50 U.S.C. 1801, et seq.) permit government agents, acting with the con
ページ11に含まれる内容の要旨
2. Initial Boot up Process 2-1. Initial Boot up and Basic Time Setup 1. During the first boot up, the following logo and message will be displayed. 2. After the system initializing is completed, select the language and set date and time as specified below. 11
ページ12に含まれる内容の要旨
2-2. Setting Daylight Saving Time To enable Daylight Saving feature/NTP synchronization, take the following steps. 1. Enter the SETUP mode. The default Username is “ADMIN” and Password is “1111”. 2. Go to SETUP > SYSTEM > DATE & TIME SETUP 12
ページ13に含まれる内容の要旨
3. Select ON from the DAYLIGHT SAVING dropdown menu. 2-3. Setting NTP (Network Time Protocol) 1. SETUP > SYSTEM > NTP SETUP > ON 2. Select the proper TIME ZONE time. Table2.3.1. GMT Time Zone State Standard Time Daylight-Saving Time AL Alabama GMT-6 GMT-5 AK Alaska GMT-9 GMT-8 AK Alaska (Aleutian Islands) GMT-10 NA NA AZ Arizona GMT-7 AZ Arizona (Navajo) GMT-7 GMT-6 13
ページ14に含まれる内容の要旨
AR Arkansas GMT-6 GMT-5 CA California GMT-8 GMT-7 CO Colorado GMT-7 GMT-6 CT Connecticut GMT-5 GMT-4 DC District of Columbia GMT-5 GMT-4 DE Delaware GMT-5 GMT-4 FL Florida GMT-5 GMT-4 FL Florida (W) GMT-6 GMT-5 GA Georgia GMT-5 GMT-4 HI Hawaii GMT-10 NA ID Idaho (N) GMT-8 GMT-7 ID Idaho (S) GMT-7 GMT-6 IL Illinois GMT-6 GMT-5 IN Indiana GMT-5 GMT-4 IN Indiana (SW / NW) GMT-6 GMT-5 IA Iowa GMT-6 GMT-5 KS Kansas GMT-6 GMT-5 KS Kan
ページ15に含まれる内容の要旨
OH Ohio GMT-5 GMT-4 OK Oklahoma GMT-6 GMT-5 OR Oregon GMT-8 GMT-7 OR Oregon (E) GMT-7 GMT-6 PA Pennsylvania GMT-5 GMT-4 RI Rhode Island GMT-5 GMT-4 SC South Carolina GMT-5 GMT-4 SD South Dakota (E) GMT-6 GMT-5 SD South Dakota (W) GMT-7 GMT-6 TN Tennessee (E) GMT-5 GMT-4 TN Tennessee (W) GMT-6 GMT-5 TX Texas GMT-6 GMT-5 TX Texas (W) GMT-7 GMT-6 UT Utah GMT-7 GMT-6 VT Vermont GMT-5 GMT-4 VA Virginia GMT-5 GMT-4 WA Washington GMT-8 GMT-7
ページ16に含まれる内容の要旨
3. Name, Function and Connection 3-1. Front Panel DxxRS DxxWRS Figure 3.1.1. Front panel Table 3.1.1. Front LED and Port of DxxRS Name Description POWER LED light is on when power is applied to the system. HDD LED light is on when the system is recording video data. USB Port This USB port for archiving footage into a USB device. (USB 2.0 connector) 3-2. Connectors Do not power this system on before all
ページ17に含まれる内容の要旨
D8RS/D8WRS D16RS/D16WRS Figure 3.2.1. Connectors ① VIDEO IN: Video input port. ② VIDEO OUT: D4RS: Switchable (Composite Video Output or Spot Monitor) D8RS, D16RS: CVBS1 – Composite Video Output / CVBS2 – Spot Monitor ③ VGA: VGA (Video Graphics Array) output port. Connects to the PC VGA monitor. ④ RS-232C (for D8RS/D16RS/D8WRS/D16WRS only): For engineering use only, the function is used by a gender through the VGA output. ⑤ AUDIO IN: Four connectors for audio input. D8RS/
ページ18に含まれる内容の要旨
3-3. Remote Control ① ID: To set the remote control ID. ② REC: To start and stop manual recording ③ 0~9: To select channel (1,2,3,..) or to enter a DVR ID number or use as number key. ④ F/REW: During playback – To move the playback position 60seconds back. During Pause – To move the playback postion 1 frame back. ⑤ F/ADV: During playback – To move the playback position 60seconds forward . During Pause – To move the playback position moves 1 frame forward ⑥ REW: To
ページ19に含まれる内容の要旨
4. Setting up the DVR The following sections detail the initial setup of the DVR. Menu screen will close if user input is not received in 5 minutes. 4-1. Setup – Main Live Screen To enter the setup menu, right click on the mouse and select setup from the submenu or press the setup button on the remote control. Table 4.1.1. Live Screen and Quick Operation Window When the DVR prompts the LOG-IN window, enter the PASSWORD using the virtual keyboard, or the front panel,
ページ20に含まれる内容の要旨
4-2. Setup – SYSTEM Mode In the SETUP menu, select the SYSTEM tab. Then, the SYSTEM menu is displayed as pictured below. Navigate through the menu items using the mouse or the remote control and change the value of the menu item. Figure 4.2.1. SYSTEM Setup Screen Table 4.2.1. Menu Items in SYSTEM Setup Screen Item Description Press the button to view the system information. (Software Version, Storage Size, IP DESCRIPTIO Address, MAC Address and DDNS Status) N LANGUAGE Select the
