Speco Technologies 200 New Highway Amityville, NY 11701 800-645-5516 www.specotech.com Speco Technologies is constantly developing product improvements. We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 11/10/09.
ページ2に含まれる内容の要旨
DVR4WM/8WM/16WM Setup Guide Package Content Inspect the DVR’s packaging. Make sure that the DVR-4WM/8WM/16WM is packed properly. Remove all items from the box and make sure it contains the following items. Remote Power Quick DVR-4WM/8WM/16WM Power Cord Control Adaptor Guide Internal Connections 1 3 4 5 6 2 7 8 9 10 LAN 10/100M The DVR is capable of networking. Once the
ページ3に含まれる内容の要旨
Main Monitor Main Monitor Audio Out RCA connector is provided for the DVR to connect an audio output 7 device (e.g. an amplified speaker). Audio Out Call Monitor Call Monitor Audio Out RCA connector is provided for the DVR to connect an audio output 8 Audio Out device (e.g. an amplified speaker). Audio In connectors are for the DVR to connect audio source devices. For DVR-4WM, 4 RCA Audio In Audio In connectors will be provided; whereas for DVR-8WM and DVR-16WM, a D-Sub Audio 9
ページ4に含まれる内容の要旨
Pin Definition of Alarm I/O & RS-485, and Audio In Alarm I/O & RS-485: DVR-4WM: Pin Definition Pin Definition Pin Definition Pin Definition 1 Alarm Out Open 5 Alarm In 1 9 Alarm Out Close 13 GND 2 Alarm Out COM 6 Alarm In 2 10 GND 14 GND 3 RS485 D+ 7 Alarm In 3 11 GND 15 GND 4 RS485 D − 8 Alarm In 4 12 GND 15pin D-sub connector I/O cable for 4TL: Speco # DVR4TLALMCBL DVR-8WM & DVR-16WM: Pin Definition Pin Definition Pin Definition Alarm In 10 1 Alarm Out Open 10 Alarm In 5 19 (
ページ5に含まれる内容の要旨
Basic Setup Enter the OSD main menu to setup some basic configurations of the DVR. The basic configuration must be set with the OSD on the DVR. Enter OSD Main Menu: • Press MENU button on the remote controller to enter the OSD main menu. • Enter username and password. The default username and password is admin and 1234. • Press MENU again to quickly input the default username “admin”. • It is strongly suggested to change the password to prevent unauthorized access. Date / Time Settin
ページ6に含まれる内容の要旨
• To change the IP address, Netmask, Gateway and DNS value, press UP/DOWN keys to move the cursor to the item. Use LEFT/RIGHT keys to access each section of the value and press ENTER, then change the value using UP/DOWN keys. • PPPoE users must set the , and as well. • When the settings are complete, press ENTER to confirm and save the settings; or ESC to abort. 6
ページ7に含まれる内容の要旨
Dome Camera Control Dome Camera Connection & Settings: • See section Pin Definition of Alarm I/O & RS-485, and Audio In for RS-485 port pin definition. • Connect the R+, R- terminals on the dome camera to the D+, D- terminals on the RS-485 port by RS-485 cable respectively. • To set up dome camera’s protocol and ID, press MENU to access the OSD main menu or change the protocol and ID by using SpecoRemote, and select . The available protocols include , ,
ページ8に含まれる内容の要旨
Connect the DVR via SpecoRemote Setup Requirements: • Make sure the PC is connected to the Internet. • Obtain IP address of the DVR-4WM/8WM/16WM. To check the DVR’s IP address, press MENU on the remote controller and select to check the IP. Changing Internet Setting: • Start the IE; select from the main menu of the browser, then and then click the tab. • Select and click
ページ9に含まれる内容の要旨
• Version verification starts automatically to verify whether SpecoRemote was installed. This process may take up to 30 seconds. • When the software is completely downloaded and installed, the Login Screen is displayed. • Enter the username and password. The default usernames and passwords are admin / 1234 and user / 4321. The following picture shows the display window of the SpecoRemote: Refer to the table below for brief description of functional items: Item Description Item Des
ページ10に含まれる内容の要旨
SpecoRemote Playback Playback Remote Video: • Click on the main window toolbar, and then tab. • The and on top of the screen display the date and time from which recorded video is available for playback. • Choose in
ページ11に含まれる内容の要旨
Mobile View Software The DVR-4WM/8WM/16WM provides mobile surveillance software called Mobile View Software. This allows users to monitor via a mobile device with internet connection. The Mobile View Software can be downloaded from the official website http://www.specotech.com/software.htm. Refer below for a brief introductions of installation on a JAVA mobile device and basic operations. Download and Installation: • Access the java installation menu on a JAVA mobile device and connect
ページ12に含まれる内容の要旨
Speco Technologies 200 New Highway Amityville, NY 11701 800-645-5516 www.specotech.com 12
