ページ1に含まれる内容の要旨
INSTALLATION INSTRUCTIONS FOR PART 99-3300
APPLICATIONS
GM
MULTI KIT
(see models list inside)
99-3300
KIT FEATURES
• DIN Mount Radio Provisiion
• Shaft Mount Radio Provisiion
KIT COMPONENTS
A) Radio Housing • Spacer
A B
TOOLS REQUIRED:
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver • Cutting Tool • Socket Set
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2004 METRA ELECTRONICS CORPORATION
ページ2に含まれる内容の要旨
99-3300 TABLE OF CONTENTS Dash Disassembly Chevrolet - Blazer 1998-2002 .... .... ... .... .... .... .... ... .... .... .... .... . . . . . . . . .1 - Camaro 1997-2002 ... ... .... .... .... .... ... .... .... .... .... .... . . . . . . . . 2 - Caprice 1994-1996 ................................................ . . . . . .. 3 - Cavalier 1995-1999 ... .... ... .... .... .... .... .... ... .... .... .... .. . . . . . . . 4 - Corvette 1997-2004 . .... ... .... .... .... .... ... .... .... .... ....
ページ3に含まれる内容の要旨
99-3300 DASH DISASSEMBLY Chevrolet Blazer/S-10 Pickup, GMC Jimmy/Sonoma 1998-2002, GMC Envoy, Isuzu Hombre, Oldsmobile Bravada 1998-2001 5 1 Disconnect the negative battery ter- Unclip and remove instrument cluster minal to prevent an accidental short trim panel. circuit. 6 Remove (2) 9/32” hex head screws 2 Remove (2) 9/32” hex head screws securing radio. Unplug and remove from the lower dash trim panel below radio. steering column. Continue to kit assembly. 3 Remove (2) 9/32” hex head screws
ページ4に含まれる内容の要旨
99-3300 DASH DISASSEMBLY Chevrolet Camaro 1997-2002 1 Disconnect the negative battery ter- minal to prevent an accidental short circuit. 2 Unclip and remove the radio trim panel. (Figure A) B 3 Remove (2) 9/32” hex head screws securing radio. Unplug and remove radio. (Figure A) 4 Cut and remove the rear support from the back of radio cavity. (Figure B) Continue to kit assembly. Dash cavity A 2
ページ5に含まれる内容の要旨
99-3300 DASH DISASSEMBLY Chevrolet Caprice, Impala 1994-1996 1 Disconnect the negative battery ter- 7 Unclip and remove instrument cluster minal to prevent an accidental short trim panel. circuit. 8 Remove (1) 9/32” hex head screw 2 Remove (5) 9/32” hex head screws from the left edge of dash trim panel. from the ashtray cavity. 9 Unclip and remove dash trim panel. 3 Remove (4) 9/32” hex head screws 10 Remove (2) 9/32” hex head screws from bottom edge of dash trim securing radio. Unplug and remov
ページ6に含まれる内容の要旨
99-3300 DASH DISASSEMBLY Chevrolet Cavalier 1995-1999 1 Disconnect the negative battery ter- 7 Remove dash pad. minal to prevent an accidental short 8 Remove (3) Phillips head screws from circuit. top edge of instrument cluster/radio 2 Remove (3) 9/32” hex head screws trim panel. Unclip and remove dash from along top edge inside of glove trim panel. box. 9 Remove (2) 9/32” hex head screws 3 Remove (2) 9/32” hex head screws securing radio. Unplug and remove from behind glove box. (Access radio.
ページ7に含まれる内容の要旨
99-3300 DASH DISASSEMBLY Chevrolet Corvette 1997-1999 1 Disconnect the negative battery ter- 7 Remove ashtray and remove (1) minal to prevent an accidental short screw from ashtray cavity. circuit. 8 Unclip and remove small grill to the left of the ignition switch. 2 Using a panel removal tool pry out on the “Ride Control” switch, unplug 9 Remove one (1) screw from behind and remove switch. grill. Unclip and remove dash trim 3 Unclip and remove switch trim panel. panel. 10 Remove (2) 9/32” hex
ページ8に含まれる内容の要旨
99-3300 DASH DISASSEMBLY Chevrolet Lumina/Monte Carlo 1995-2001 1 Disconnect the negative battery ter- minal to prevent an accidental short circuit. 2 Unclip and remove dash trim panel. (It may be necessary to loosen the lower dash trim panel below steer- ing column.) A 3 Remove (2) 9/32” hex head screws securing radio. Unplug and remove radio. 4 Cut and remove the rear support from the back of radio cavity. (Figure A) Continue to kit assembly. Dash cavity 6
ページ9に含まれる内容の要旨
99-3300 DASH DISASSEMBLY Chevrolet Malibu 1997-2000 1 Disconnect the negative battery ter- minal to prevent an accidental short circuit. 2 Unclip and remove the radio trim panel. 3 Remove (2) 9/32” hex head screws securing radio. Unplug and remove radio. Continue to kit assembly. 7
ページ10に含まれる内容の要旨
99-3300 DASH DISASSEMBLY Chevrolet Venture, Pontiac TransSport 1997- 1999, Oldsmobile Silhouette 1997-2000, Pontiac Montana 1999 1 Disconnect the negative battery ter- 4 Unclip and remove the radio trim minal to prevent an accidental short panel. circuit. 5 Remove (2) 9/32” hex head screws 2 Remove ashtray and remove (1) securing radio. Unplug and remove Phillips head screw from ashtray radio. cavity. 6 Cut and remove the rear support from 3 Remove (1) Phillips head screw from the back of radio
ページ11に含まれる内容の要旨
99-3300 KIT ASSEMBLY DIN MOUNT RADIO PROVISION *Note: Refer also to the instructions included with the aftermarket radio. A 1 Cut and remove the shaft supports from the radio housing. (Figure A) 2 Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs outward. (Figure B) NOTE: The spacer included with this kit can be used between the radio and the DIN cage fror vehicles with shallow radio cavities if necessary. (Figure D) 3 Slide the aftermarket radio into the c
ページ12に含まれる内容の要旨
99-3300 KIT ASSEMBLY SHAFT MOUNT RADIO PROVISION *Note: Refer also to the instructions included with the aftermarket radio. 1 Slide the aftermarket radio into the radio housing from the back and secure using shaft nuts supplied with the radio. (Figure A) Continue to final assembly. A 10
ページ13に含まれる内容の要旨
99-3300 FINAL ASSEMBLY FINAL ASSEMBLY A (A) Strip wire ends back 1/2" B B) Twist ends together C) Solder D) Tape C D 1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individ- ually tape off the ends of any unused wires to prevent electrical short circuit.) 2 Re-connect the negative battery terminal and test the unit for proper operation. 3 Reassemble radio and dash assemblies in reverse order of disas
ページ14に含まれる内容の要旨
99-3300 NOTES 12
ページ15に含まれる内容の要旨
99-3300 NOTES 13
ページ16に含まれる内容の要旨
99-3300 INSTRUCTIONS 1-800-221-0932 www.metraonline.com REV. 10/02/06 © COPYRIGHT 2004 METRA ELECTRONICS CORPORATION INST99-3300
