ページ1に含まれる内容の要旨
TFT-LCD TELEVISION
OWNER`S MANUAL
MODEL: L42A9-AK
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
ページ2に含まれる内容の要旨
Congratulations on your purchase, and welcome to the family ! Dear Haier product owner: Thank you for your confidence in Haier. You`ve selected one of the best-built, best-backed products available today. We`ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the Haier family, you`re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. thanks for investing in a Haier product
ページ3に含まれる内容の要旨
C CO ON NT TE EN NT T BEFORE OPERATING Warning.................................................................................................................1 Important Safety Instructions................................................................................2 Buttons and interface location............................................................................. 4 Remote controller.............................................................................................
ページ4に含まれる内容の要旨
Warning WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. *To avoid electric hazards, it is strongly suggested that the back cover not be opened, as there is no any accessory inside the casing. *If necessary, please contact authorized after-sales services. *A lighting flash mark in a triangle: A potentially hazardous situation, which, if not a
ページ5に含まれる内容の要旨
Important Safety Instructions The product should be tightly fixed to avoid To avoid fire hazards, do not use this drop damages and even fire. product under direct sunlight or closely to heat sources. Do not locate the product close to water Unplug the power supply and antenna of the product when there is a rainstorm, or oil, which may cause fire hazards. especially Thunderstorm. Do not use damaged or worn electric plugs Do not connect excessive sockets in parallel and keep electric cord
ページ6に含まれる内容の要旨
Important Safety Instructions Don't use or store inflammable materials Don't place the product in a humid area to near the product to avoid explosion or fire avoid fire hazards. hazards. Never touch the plug when your hand is wet The antenna of the product should be away as this might cause electric shocks. from electric cable to avoid electric shocks. Always make sure that the televisionis well When antenna is used, measures should be plugged as poor electric taken to prevent water con
ページ7に含まれる内容の要旨
Buttons and interface location - This is a simplified representation of front panel. - Here shown may be somewhat different from your TV. Front panel Control - CH + - VOL + TV/AV MENU POWER Buttons and functions 1 Channel number increase and decrease. 2 Volume decrease:for lowering the volume or adjusting the menu. Volume increase: for enhancing the volume or adjusting the menu. 3 TV/AVbutton 4 Menu button 5 Power and indicator: for turning on or off the power supply. 6 Remote receiving wi
ページ8に含まれる内容の要旨
Buttons and interface location Rear panel Control USB Socket VIDEO Input Connects the video signal from a video device. VIDEO AUDIO Input L connect to hear stereo sound from an AUDIO external device. R Switch power on/off Power Cord Socket This TV operates on AC power. POWER The voltage is indicated on the specifications page. Never attempt to operate the TV on DC power Video/Audio output External Speaker DVD/DTV Input terminal (8 ohm Output) (Component ) Connect ordinary v
ページ9に含まれる内容の要旨
Remote controller Battery loading 1.Slide open the cover of the battery compartment on the back of the remote controller. 2.Load two 5# alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. 1 2 3 Precautions As strong light may interfere the Make sure that two AA alkaline batteries signals, change your position to are loaded. The batteries must be of the operate the remote controller if same type. The batterie
ページ10に含まれる内容の要旨
Remote controller key function Calendar Picture still no available MUTE POWER Switches the sound on or off. Turns your TV or any other programmed equipment on or off, depending on mode. S-Video mode select S-Video. PC/DVI mode Select PC/DVI mode. TV/VIDEO DVD mode Select DVD mode NUMBER buttons Q.VIEW CHANNEL select Return to the last channel is not available viewed. Information display Display of current channel OK button signals, program and systems VOLUME UP/DOWN CHANNEL UP/DOWN Increa
ページ11に含まれる内容の要旨
Effective range of remote controller Effective range above 20 20 below 45 45 right left front 8m Color.SYS Sound.SYS Edit Scan Shuttle Time.Skip PIP Swap Zoom/Move Sleep UP Left/Prew Forward USB DOWN Right/Next REV EXIT Pause Enter ZOOM HELP Ensure the remote controller is pointed toward the remote controller windows on the display. No obstacles should be placed between the remote controller and the remote controller window. The effective receiving scope for the signal is 8 meters to the
ページ12に含まれる内容の要旨
External Equipment Connections - Antenna or Cable Service without a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed. outdoor antenna Antenna input 75 standard coaxial type ANT IN 75 coaxial cable 300 twin-lead cable Plug Antenna adapter (additional purchase) Note * It is recommended that you'd better use 75 coaxial cable to remove the disturbance caused by airwave. * Don't bind antenna cable and electric wire together. To improve picture quality
ページ13に含まれる内容の要旨
External Equipment Connections DVD setup How to connect 1. Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr) INPUT jacks on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure. COMPONENT IN AV IN 2. If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on Pr/Cr Pb/Cb Y L AUDIO R VIDEO S-VIDEO L AUDIO R the TV and Connect the DVD audio outputs to the AUDIO INPUT jacks on the TV,
ページ14に含まれる内容の要旨
External Equipment Connections PC setup How to connect 1. To get the best picture quality, adjust the PC graphics card to (L42A9-Ak->1024x768),60Hz. 2. Use the TV`s VGA INPUT or DVI (Digital Visual Interface) INPUT port for video connections, depending on your PC connector. If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of either VGA INPUT or DVI INPUT to display the PC on the TV . If the graphic card on the PC does output analog an
ページ15に含まれる内容の要旨
External Equipment Connections Connect Loudhailer Loudhailer 1. Face the LCD screen upside down on a clean blanket or a bracket and pay attention not to indent the casing. Lay the two speaker aside of the LCD. 2. Lay annectent bracket on the speaker and hind rind, Fix 8 ST4X8 screws to the speaker and hind rind. 3. Connect the speaker cable to the speaker terminal of LCD TV and the speaker terminal, and insert the connecting cable into the terminal slot, Screw hole Annectent Release
ページ16に含まれる内容の要旨
External Equipment Connections Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel of the set. ANT IN Note Prolonged use of headphones at a high volume may damage your hearing. You will not receive sound from the speakers when you connect headphones to the system. Power source TO USE AC POWER SOURCE Use the AC pola
ページ17に含まれる内容の要旨
Switching ON/OFF the TV set In the manual, the OSD (on screen display) may be different from your TV`s because it is just an example to help you with the TV operation. Power ON/OFF Switching ON/OFF the TV set 1 Please press down the power switch to switch on AC power supply and the power indicator will light . 2 If the indicator is lighting in red, press POWER button on the remote control again. Indicator - CH + - VOL + TV/AV MENU POWER 3 If you want to exchange to standing by Remote r
ページ18に含まれる内容の要旨
Select input modes Choose the input source If you hope to enjoy the picture from the external input source, before to select the source, you need to connect the devices, otherwise, when you select the source, the none or no signal will appears on the screen. Source Press TV/AV button on remote controller, the menu appears on the screen. Then press CH+/- to select the TV item, and press VOL+/- to ensure it. TV: the input source from ANT IN terminal output. AV1: the input source from AV1
ページ19に含まれる内容の要旨
Searching Channel This TV set has three methods to set channels, which are respectively full automatic, manual search fine tune. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel. Full automatic search mode Automatic search 1 Press the MENU button and Color Sys. Auto Sound Sys. D/K VOL+/- button, till tuner menu Manual Search Store Program --- shown on the right d
ページ20に含まれる内容の要旨
Searching Channel Manual search Manual search 1 Press the CH+/- buttons or the TV01 AUTO PROGRAM NUMBER 0-9 D/K button to choose desired channels regard channel 1 as example 2 Press the MENU button and Color Sys. Auto Sound Sys. D/K VOL+/- button, till the TUN. Manual Search Store Program --- menu shown on the right display Fine Tune 49.75MHz Skip Off on the screen. Auto Search Prog. Switch
