ページ1に含まれる内容の要旨
Anetsberger Brothers, Inc.
180 North Anets Drive • Northbrook, Illinois 60062 • 847-272-0770 • Fax 847-272-1943
For ANETS Factory Warranty Service • 800-837-2638
GoldenGRILL GoldenGRILL GoldenGRILL GoldenGRILL GoldenGRILL
Models
MG - Manual Grills
SG - Standard Grills
SGC - Chrome Grills
Installation,
User Operation,
SGC24X48 on legs shown
&
Maintenance
Manual
DANGER
!
Improper installation, adjustment, alteration, service, or maintenance can
cause property damage, injury or death. R
ページ2に含まれる内容の要旨
CONTENTS Shipping Container Inspection ....................................................... 3 Grill Gas Supply Specifications ...................................................... 4 Code Requirements ...................................................................... 5 Installation Requirements ............................................................... 6 Gas Connection Instructions .......................................................... 6 Grill Operating Instructions .............
ページ3に含まれる内容の要旨
! DANGER Read these specifications, Code Requirements, Installation Requirements, Instal- lation Instructions, and Operating Instructions very carefully. Failure to follow the Instructions could cause the grill to malfunction. A grill malfunction can result in property damage, serious bodily injury, or death. SHIPPING CONT SHIPPING CONT SHIPPING CONT SHIPPING CONT SHIPPING CONTAINER INSPECTION AINER INSPECTION AINER INSPECTION AINER INSPECTION AINER INSPECTION 1. Carefully examine the shipping
ページ4に含まれる内容の要旨
GRILL GAS SUPPLY SPECIFICATIONS Please make sure that your desired grill location has gas supply factors that are suitable for this product: Natural Gas Propane Gas 3½“ W.C. ** 10“ W.C. MANIFOLD PRESSURE* 6“ W.C., minimum 11“ W.C., minimum SUPPLY PRESSURE*** * - Measured at tap on back side of gas manifold. ** - “ W.C. = Inches, Water Column. *** - Measure supply pressure ahead of pressure regulator when all other gas-powered equipment is operating. Refer to the specificati
ページ5に含まれる内容の要旨
CODE REQUIREMENTS CODE REQUIREMENTS CODE REQUIREMENTS CODE REQUIREMENTS CODE REQUIREMENTS IMPORTANT: Read the Code Requirements and the Installation Requirements and Instructions carefully, before starting the installation. Contact ANETS (800/ 837-2638) if any problems or questions arise. The grill installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1 (latest edition); the Natural Gas Installation Code, CAN/CGA-B149.1 (late
ページ6に含まれる内容の要旨
INST INST INST INST INSTALLA ALLA ALLA ALLA ALLATION REQ TION REQ TION REQ TION REQ TION REQUIREMENTS UIREMENTS UIREMENTS UIREMENTS UIREMENTS Install the grill in accordance with the preceding Code Requirements, as well as the following Installation Requirements. 1. DO NOT install this grill in a mobile home, trailer, or recreational vehicle. 2. Install this grill in a location that allows it to be moved away from other adjacent appliances for cleaning and maintenance. NOTE: If the grill is ins
ページ7に含まれる内容の要旨
GRILL OPERA GRILL OPERA GRILL OPERA GRILL OPERA GRILL OPERATING INSTR TING INSTR TING INSTR TING INSTR TING INSTRUCTIONS UCTIONS UCTIONS UCTIONS UCTIONS CAUTION DO NOT operate this grill during an interruption of gas service. Turn all grill controls to OFF, including the gas control valve knobs, then close the gas supply line valve. When notified that the gas service has resumed, perform the Lighting Procedure descibed below. ! DANGER DANGER ! Avoid moving the grill while it remains NEVER ope
ページ8に含まれる内容の要旨
GRILL PREP GRILL PREP GRILL PREP GRILL PREP GRILL PREPARA ARA ARA ARA ARATION FOR USE TION FOR USE TION FOR USE TION FOR USE TION FOR USE MANUAL AND STANDARD GRILLS ONLY (DO NOT USE FOR CHROME GRILL) Conditioning Instructions - MG & SG Models ONLY 1. Upon examination of your grill you will notice that the grill plate is covered with a protective grease. To remove this grease, turn grill thermostats to about 250°F setting (or low setting on manually operated grills). As the grill plate warms
ページ9に含まれる内容の要旨
D D D D DAIL AIL AIL AIL AILY CLEANING PR Y CLEANING PR Y CLEANING PR Y CLEANING PR Y CLEANING PROCEDURE OCEDURE OCEDURE OCEDURE OCEDURE Standard Grill Cleaning Instruction (MG & SG Models Only) 1. Clean grill plate often to prevent sticking and poor quality of product. 2. Scrape the grill plate regularly with a spatula or scraper to remove all surface grease and food particles. 3. For thorough cleaning, use a grill brick or grill screen to remove carbon build up on grill plate. Do not use any
ページ10に含まれる内容の要旨
GRILL GRILL TR TROUBLESHOO OUBLESHOOTING GUIDE TING GUIDE GRILL GRILL GRILL TR TR TROUBLESHOO OUBLESHOO OUBLESHOOTING GUIDE TING GUIDE TING GUIDE All service (repairs or part replacement) must be performed by a qualified Service Agency. PROBLEM TEST REMEDY Pilot (piezo-electric) 1. Check if igniter is generating a spark. 1. Yes - Skip to test #3. pushbutton igniter does No - Proceed with test #2. not light the pilot flame. 2. Check for loose spark wire or igniter nut. 2. Yes - Tighten, skip to #
ページ11に含まれる内容の要旨
GRILL GRILL GRILL GRILL GRILL TR TR TR TR TROUBLESHOO OUBLESHOO OUBLESHOO OUBLESHOO OUBLESHOOTING GUIDE TING GUIDE TING GUIDE TING GUIDE TING GUIDE (Continued) PROBLEM CAUSE REMEDY Main burners do not 1. Yes - Proceed to test #2. 1. Check that gas control valve is set to ignite. No - Turn to “ON” and skip to “ON”. test #5. 2. Yes - Proceed to test #3 2. Check that pilots are burning. No - Follow lighting instructions on page 7. Skip to test #5. 3. Proceed to test #4. 3. Increase temperature set
ページ12に含まれる内容の要旨
GRILL GRILL GRILL GRILL GRILL TR TR TR TR TROUBLESHOO OUBLESHOO OUBLESHOO OUBLESHOO OUBLESHOOTING GUIDE TING GUIDE TING GUIDE TING GUIDE TING GUIDE (Continued) PROBLEM CAUSE REMEDY (Continued) 5. Increase if needed, proceed to 5. Check gas supply pressure with all Grill plate is cold test #6. other equipment operating. (6” (Burners not WC for natural gas and 11” WC firing). 6. Yes - Okay. for propane, minimum). No - Replace thermostat. 6. Observe if main burners are
ページ13に含まれる内容の要旨
LIMITED WARRANTY ANETSBERGER BROTHERS, INC., Northbrook, Illinois, USA, certifies that all equipment of its manufacture is, to the best of its knowledge, free from defective material and workmanship. ANETSBERGER BROTHERS, INC., agrees to replace any integral part of its equipment that proves defective within 15 months of date of original ship- ment from the factory, or 12 months from the date of installation, whichever is sooner. Buyer must return the defective part to the factory, freight prep
ページ14に含まれる内容の要旨
Anetsberger Brothers, Inc. 180 North Anets Drive • Northbrook, Illinois 60062 • 847-272-0770 • Fax 847-272-1943 Toll-free Customer & Warranty Service: 800/ 837-2638 Web Site: www.anetsberger.com Keep this Manual in a Convenient Location for Reference Form I-201; Rev. 3/02 Price $20.00 US 14
