ページ1に含まれる内容の要旨
Use & Care Guide
Manual de Uso y Cuidado
English / Español
Models/Modelos: 119.16658011
Kenmore®
Liquid Propane Gas Grill
Parilla a gas de propane liquido
P/N MCDOPTA000
Sears Brands Management Corporation
Hoffman Estates, IL 60179 U.S.A
www.kenmore.com
www.sears.com
™
ページ2に含まれる内容の要旨
Table of Contents IF YOU SMELL GAS: Primary Safety Warnings…………………………………1-3 l Shut off gas to the appliance. Warranty Information………………………………………… 2 l Extinguish any open flame. Pre-Assembly Instructions………………………………… 3 l Open lid. Part Diagram and Lists…………………………………… 4-7 l If odor continues, keep away Assembly Instructions…………………………………… 8-18 from the appliance and immediately Use & Care Instructions…………………………………19-27 call your gas supplier or your fire Frequently
ページ3に含まれる内容の要旨
Safety Information Grill Installation Codes The installation must conform with local codes or, l DO NOT light this grill without first reading in the absence of local codes, with either the the Lighting Instructions. National Fuel Gas Code, ANSI Z223.1/NFPA 54, l DO NOT light this grill without checking the or CAN/CGA B149.1, Natural Gas and Propane burner tubes for blockage that could have Installation Code, or Propane Storage and occurred during shipment.
ページ4に含まれる内容の要旨
Hardware Pack Diagram F A Phillips Head Bolt M6x40mm Phillips Head Screwdriver Qty: 4 pcs Qty: 1 pc : Par t N o. MCDOY13 000 Par t No.: MCDKY20000 G B Phillips Head Bolt M6x16mm Battery Size AA Qty: 24 pcs Qty: 1 pc Par t No.: MCDOY11 000 H C Phillips Head Bolt M6x10mm Cabinet Door Stop Qty: 4 pcs Qty: 1 pc : Par t N o. MCDKY18 000 ar t N o. :SE0123- 002 P D I Phillips Head Bolt M4x8mm Qty: 20 pcs "S" Hook Par
ページ5に含まれる内容の要旨
Parts List 119.16658011 Key Qty Part No. Description A1 1 HCDOCVA000 Hood Assembly A2 2 *ASMA0014-03 Hood Bolt Assembly A3 2 FLPP0114 Hood Handle Heat Insulator A4 1 SE0208 Thermometer A5 1 CA0045-002 Thermometer Seat A6 1 *ASMA0071-03 Hood Handle A7 2 CA0046-001 Hood Handle Seat Assembly B1 1 SE0294-012 Warming Rack B2 2 SE0292-A Cooking Grate – Small B3 1 SE0005-A Cooking Gr ate – Big S1007-012E-016 B4 4 Heat D iffuser B5 1 SD0053 In
ページ6に含まれる内容の要旨
Parts List 119.16658011 Key Qty Part No. Description C4 1 *ASMC0086-04 Right Door Assembly C5 1 *ASMC0086-05 Cabinet Front Crossbar C6 1 S4025-042D-002 Cabinet Door Stop C7 1 *ASMC0086-06 Cabinet Top Plate C8 2 SE0257 Swivel Caster C9 2 SE0055 Swivel Locking Caster C10 1 SE0159-001 Manual Igniter Stick C11 1 SE0295-002 Cylinder Support Ring C12 1 SE0080-001 Regulator and Hose Support Ring C13 1 SE0288-001 Door Top Pin C14 1 SE0289-001 Door Lowe
ページ7に含まれる内容の要旨
Parts Diagram 119.16658011 7
ページ8に含まれる内容の要旨
Assembly Instruction Remove Firebox from Cabinet 1 Cut fastening straps on Cabinet Toe Plate. Remove the Toe Plate and set aside. Cut fastening straps securing regulator and hose to cabinet. Unscrew and discard the 8 Phillips Head Bolts (M6x40mm) and 8 Washers (M6) from the corner holes of the cabinet. Remove the crossbar and set aside. With the aid of an assistant, carefully lift the cabinet up fr
ページ9に含まれる内容の要旨
Install Cabinet Toe Plate 3 Attach the Cabinet Toe Plate to the Cabinet Bottom Panel using 4 Phillips Head Bolts (M6x10mm). Place cabinet in upright position on casters. Phillips Head Bolt M6x10mm Qty: 4 Install Cabinet Doors and Cabinet Front Crossbar 4 Insert the Cabinet Right Door bottom pin into the Cabinet Bottom Panel (Inset 1), and insert the Cabinet Right Door
ページ10に含まれる内容の要旨
Attach Cabinet Door Stop 5 □ Attach the Cabinet Door Stop to the front of cabinet bottom using 2 Phillips Head Bolts (M4x8mm). Phillips Head Bolt M4x8mm Qty: 2 Cabinet Door Stop Qty: 1 Attach Firebox to Cabinet 6 □ With the aid of an assistant, place the Firebox onto the Cabinet Frame with Regulator Hose and
ページ11に含まれる内容の要旨
Install Grease Tray 7 Insert the Grease Tray along the two sides of the Firebox from the back underneath the firebox. Insert tray with the grease drain hole positioned as shown. Slide tray fully in until it locks into place behind stops. Install Grease Pan Bracket and Grease Pan 8 From the rear of cabinet, insert the Grease Pan Bracket into the bottom of the Grease Tray. From
ページ12に含まれる内容の要旨
Install Side Shelf Upper and Lower Front Panels 9 Attach the Side Shelf Upper Front Panel to Side Shelf Frame using 3 Phillips Head Bolts (M4x8mm). See Inset 1. Attach the Side Shelf Lower Front Panel to Side Shelf Upper Front Panel using 3 Phillips Head Bolts (M4X8mm). See Inset 2. Inset 1 Inset 2 Phillips Head Bolt M4x8mm Qty: 6 Install Towel Bar Handle, “S” Hooks 10 Slide 3 "S" Hooks onto the Towel Ba
ページ13に含まれる内容の要旨
Install Side Burner Upper and Lower Control Panels 11 Attach the Side Burner Upper Control Panel to Side Burner Frame using 3 Phillips Head Bolts (M4x8mm). See Inset 1 Attach the Side Burner Lower Control Panel to Side Burner Frame using 3 Phillips Head Bolts (M4x8mm). See Inset 2. Phillips Head Bolt M4x8mm Qty: 6 Inset 2 Inset 1 Install Towel Bar Handle 12 □ Use 2 Phillips
ページ14に含まれる内容の要旨
Install Side Shelf Frame to Firebox 13 Unscrew the 2 Phillips Head Bolts ¼ inch from the upper left and right corner holes in the right side of the firebox as shown in Inset 1. The bolts extending out of the firebox sides are to attach the Side Shelf Frame. Slide the upper holes of the Side Shelf Frame over the heads of the 2 Phillips Head Bolts and drop down. Use 2 Phillips Head Bolts (M6x16mm) to attach the lower holes in the Side Shelf Frame to the firebox as shown in Ins
ページ15に含まれる内容の要旨
Install Side Burner Frame to Firebox 14 Unscrew the 2 Phillips Head bolts ¼ inch from the upper left and right corner holes in the left side of the firebox as shown in Inset 1. The bolts extending out of the firebox sides are to attach the Side Burner Frame. Slide the upper holes of the Side Burner Frame over the heads of the 2 Phillips Head Bolts and drop down. Use 2 Phillips Head Bolts (M6x16mm) to attach the lower holes in the Side Burner Frame to the firebox as shown in
ページ16に含まれる内容の要旨
Install Side Burner Valve 15 Locate the side burner ignition wire underneath the main burner control panel. It will be labeled. Feed side burner valve and igniter wire through hole in left side of cabinet. Open side burner lid and cut tie wrap securing grate to pan. On underside of pan, remove the 2 screws holding the side burner in place. See Inset 1. Secure the side burner valve stem to the Side Burner Lower Control Panel usin
ページ17に含まれる内容の要旨
Install Heat Diffusers, Cooking Grates, Warming Rack 17 Insert the Heat Diffusers into the firebox by placing them into the indentations in the front and back of the firebox. See Inset 1. Place the Cooking Grates into the firebox. See inset 2. Insert the Warming Rack into the top of the firebox. See Inset 3. The raised lip goes towards the back of the firebox. Inset 3 Inset 1 Inset 2 Place and Secure LP C
ページ18に含まれる内容の要旨
Install Battery 19 Unscrew the Electronic Ignition Button. Place the AA Battery into the ignition with the positive (+) end facing out. Screw the Electronic Ignition Button back into place. Battery Size AA Qty: 1 Congratulations – Assembly is now complete! 20 Remove any additional labels or packing material from the grill except the CSA label. Be sure to clean all foam packing material out o
ページ19に含まれる内容の要旨
LP Gas Tank Information CORRECT LP GAS TANK USE l Never allow children to operate your grill. Do not allow children or pets to play near your grill. l LP gas grill models are designed for use with a l Use of alcohol or drugs may impair the ability standard 20lb. (9.1kg) Liquid Propane Gas (LP Gas) to assemble and operate the appliance. tank, which is not included with the grill. Never connect l Keep a fire extinguisher readily accessible. In your gas grill to an LP gas tank
ページ20に含まれる内容の要旨
Regulator and LP Cylinder Connections Notes about LP Gas Tank Exchange Programs ˙ Many retailers that sell grills offer you the option of replacing your empty LP gas tank through an exchange service. Use only those reputable exchange companies that inspect, precision fill, test The gas pressure regulator provided with this and certify their tanks. Exchange your tank only for outdoor cooking appliance must be used. This an OPD safety feature equipped tank as described
