ページ1に含まれる内容の要旨
INSTRUCTION MANUAL
MODEL: CA-CD800
A2DP Bluetooth AM/FM/CD/MP3/WMA/SD/USB/AUX/iPod/iPhone Receiver
1
ページ2に含まれる内容の要旨
CONTENTS Precautions & Maintenance P3 Quick Start Guide P3 Dashboard Installation P4 Connecting the System P5 Removal / Re-Attachment of the Face P6 Basic Operations P6 Audio Functions P8 System Menu P9 Radio Operation P10 RDS Operation P10 iPod / iPhone Operation P11 Bluetooth H/F & A2DP Operation P13 Media Playback (CD/USB/SD/Aux In) P15 Additional Media Playback Functions P16 Steering Wheel Control Interface Ready P17 FCC COMPLIANCE STATEMENT Optional Remote Cont
ページ3に含まれる内容の要旨
PRECAUTIONS & QUICK START GUIDE MAINTENANCE TUNER REGION SETTING GENERAL When the unit is powered up for the first time (or the battery is disconnected or runs flat), you will need to set • When cleaning the vehicle, do not get water or cleaning your tuner region. fluids on the unit. 1. When you press the power button to turn on the unit, • Do not attempt to open the unit chassis. There are no user servicable parts or adjustments inside. [OCEANIA] will be displayed on the LCD screen as
ページ4に含まれる内容の要旨
2. Search for a new Bluetooth device on the phone. If you have any questions or require information regarding 3. Select “FUSION” on the Bluetooth device list. installation kits, consult your car audio retailer. 4. Some devices may require you to enter a PIN. If you are not sure how to install this unit correctly, have it If prompted, enter “0000” for the PIN. installed by a qualified installer. Please see P12 for detailed Bluetooth operation. RGB 32K+ SELECTION The initial colour setting for
ページ5に含まれる内容の要旨
CONNECTING THE SYSTEM WIRING DIAGRAM 5
ページ6に含まれる内容の要旨
REMOVAL/RE-ATTACHMENT BASIC OPERATIONS OF THE FACE 1. Press the Panel OPEN button. 2. After flipping down the front panel, push it to the right (A), then draw the left of the front panel outwards (B) 3. To re-attach the face, please complete the above steps in reverse. 1. OPEN Press this button to flip open and detach the control panel. 2. ENCODER VOLUME CONTROL Rotate the encoder volume to increase and decrease the volume. PLEASE NOTE 3. iPod/iPhone INTERNAL/EXTERNAL CONTROL Press this bu
ページ7に含まれる内容の要旨
a) Press this button to answer an incoming call. c) RGB – 32K+ RGB COLOUR. Press and hold this button to access the 32k+ variable colour setting mode. See Page 9 for more b) Press & hold for 2 seconds to transfer the call from the information CA-CD800 back to the Mobile Phone. 11. BAND/SEARCH 7. NUMERIC BUTTONS a) In Tuner mode, press this button to cycle through Bands: a) In the Tuner mode, press the Numeric buttons to recall the preset stations. Press and hold these buttons for 2 secon
ページ8に含まれる内容の要旨
MID CFQ Select the Midrange centre frequency: 0.5K / AUDIO FUNCTIONS 1.0K / 1.5K / 2.5KHz All Audio functions are easily accessable on the CA-CD800. TRE Adjust the Treble level between -7 to +7. AUDIO MENU. Press the ENCODER VOLUME CONTROL TRE CFQ Select the Treble centre frequency: 10.0K / to access the Audio Menu mode. Then press ENTER or 12.5K / 15.0K / 17.5KHz TUNE UP to select the Audio Function to be adjusted, BAL (Balance) Adjust the balance between the right and le
ページ9に含まれる内容の要旨
LOC* ON/OFF SYSTEM MENU (Local/Distance). Use this setting to Auto Seek to strong Press (MENU) to access the System Menu and press local stations (Local) or all stations regardless of their again to select the item be adjusted, then rotate Encoder strength (Distance). Volume Knob to select a value / option. To exit this menu at any time, press the ESC/END/RGB button AREA STORE (Auto store) Select your country/region for the tuner: OCEANIA (Australia/New Zealand); USA; EUROPE; Whi
ページ10に含まれる内容の要旨
UP or DOWN button, and press it again repeatedly until you select COLOUR SCAN (default setting); WHITE; GREEN 1; GREEN your desired frequency. After 5 seconds, the display will stop 2; GREEN 3; AMBER; PINK 1; PINK 2; PURPLE 1; PURPLE flashing and the unit will be tuned in to that station. 2; BLUE 1; BLUE 2; USER; DEFAULT. USER (USER SELECTED COLOUR): HOW TO STORE YOUR FAVOURITE STATIONS This allows you to select your choice of display colour from 1. Select your preferred Band. Generally you
ページ11に含まれる内容の要旨
(AF) SELECT ALTERNATE FREQUENCIES iPod/iPhone OPERATION If the radio signal from the current station is poor, you can turn This unit is equipped with iPod/iPhone control which on the AF (Alternate Frequency) function to let the unit search allows you to directly control and charge iPod/iPhones automatically for another station with a stronger signal but with using the units controls – with display of iPod/iPhone track the same program identification as the current station. information appe
ページ12に含まれる内容の要旨
BASIC SEARCH – PLAYLIST/ARTIST/ALBUM/SONG on 2. Rotate the Encoder Volume knob to select the desired iPod/iPhone selection within the field then, press ENTER to confirm. NOTE Press BAND to browse the iPod/iPhone menu. When searching for Album, Artist, Song etc, rotate the Encoder Then rotate the Encoder Volume Control clockwise to and Volume Control clockwise to search from A-Z or anti-clockwise press ENTER to choose one of the following selections, for Z-A search. then follow the st
ページ13に含まれる内容の要旨
PAIRED NOTIFICATION DISPLAY BLUETOOTH HANDS When the Bluetooth device is paired with the CA-CD800, the FREE & A2DP Bluetooth Icon will appear on the LCD display. This should occur whenever you use the system and the paired device is in range. STREAMING OPERATION You can make or receive phone calls with Bluetooth HOW TO MAKE A CALL enabled phones and listen to music from an A2DP 1. Dial the desired number on the Mobile Phone. Bluetooth enabled device on the CA-CD800. 2. Once diallin
ページ14に含まれる内容の要旨
TO REDIAL A NUMBER ADVANCED OPERATION 1. During normal head unit operation, press the ANSWER If the device also supports Audio Video Remote Control button to call the last number dialled by the paired mobile Profile (AVRCP), you can control basic playback functions phone. [REDIAL] will be displayed on the LCD screen. (eg iPod music) via the head unit. 2. To confirm press either the ANSWER button again or 1. Follow steps 1 & 2 above as per Basic Operation ENTER on the Encoder Volume Co
ページ15に含まれる内容の要旨
1. Press MENU to enter the system menu. USB OPERATION Keep pressing until [CONNECT>] is displayed. Insert the USB Device 2. Press ENTER on the Encoder Volume Control. 1. Open the cover marked on the front panel. [WAITING] will be displayed on the LCD display, followed 2. Insert the USB by [CONNECTED] when completed. device into the USB socket. The unit will MEDIA PLAYBACK (CD/ start playing from USB/SD/AUX IN) the USB device CD PLAYBACK automatically. You can play th
ページ16に含まれる内容の要旨
3. Insert the SD card into the slot with label facing up until ADDITIONAL MEDIA a “CLICK” sound is heard. PLAYBACK FUNCTIONS 4. Replace the front panel and the unit will start playing (CD/USB/SD) files from the card automatically. PLAY OPTIONS Removal of the SD Card MP3/WMA File or Folder Search Detach the face and press the card until you hear a click • Press the BAND button on front panel access the MP3/ sound. The card is now disengaged. You can then remove WMA file search mode.
ページ17に含まれる内容の要旨
3) to repeat all tracks on the storage media. [RPT ALL] is DISPLAY FUNCTION displayed. During playback, pressing the DISP button will automatically • If you press RPT again, the current track will be repeated cycle through the following information on the file being only [RPT TRK] will be displayed played on the LCD display: • Pressing RPT again repeats all tracks in the current folder FOLDER NAME> FILE NAME> ALBUM> TITLE> ARTIST only [RPT FLD] is displayed You can also keep pressing the DIS
ページ18に含まれる内容の要旨
Vol Up Volume Up TROUBLESHOOTING Vol Down Volume Down Before going through the check list, please check the wiring Track Up Track Up connection diagram. If problems persist, please consult your Car Audio dealer. Track Down Track Down No power or no sound Preset Down Sub Level Down • Ignition is not on. Turn the Ignition to “accessories” Preset Up Sub Level Up • Unit is off - press the power button to activate the unit. Please visit www.fusionelectronics.com to check for • Fuse is blown.
ページ19に含まれる内容の要旨
• USB/SD data error. Check to ensure only MP3 or WMA HOW TO RESET THE UNIT files are loaded on the storage devices. Using the Reset button, you can reset the unit to its default Display shows ERR-5 settings. • Communication error. The USB/SD device could be • The RESET button is located on the main unit (as shown damaged or corrupted. Please re-format (Fat32 only) or try on the diagram). Press it in with a ballpoint pen or metal a different device. object to activate it. Bluetooth • The re
ページ20に含まれる内容の要旨
RDS PROGRAM TYPES PRODUCT & DESCRIPTIONS SPECIFICATIONS Power Supply 12V DC (11-16V), Negative Ground NEWS News services Fuse 15A AFFAIRS Politics & current affairs Suitable Speaker 4 – 8Ω INFO Special information programs Impedance SPORT Sports Power output MOSFET 50W MAX x 4 channels EDUCATE Education and advanced training RMS output 22W x 4 @ 10% THD DRAMA Radio plays and literature Pre-AMP output 5.0 V (USB play mode; 1KHZ, 0dB, 10 k Ω load) CULTURE Culture, religion and soc
