ページ1に含まれる内容の要旨
HP ProLiant
Storage Server Service Release 6.6
release notes
These release notes provide information and describe issues related to the release of Service Release 6.6 for HP ProLiant
Storage Servers, HP ProLiant Data Protection Storage Servers and HP StorageWorks NAS Products.
Part number: 5697–6839
First edition: October 2007
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
VERSION: 6.6 Version information can be obtained: • In the HP ProLiant Storage Server Management console by selecting System Settings and viewing System Information. • In the HP ProLiant Storage Server Web UI by selecting the Status tab, then System Information tab. Description These release notes provide information about the contents of Service Release 6.6 and describe issues related to the release of Service Release 6.6 for HP ProLiant Storage Servers, HP ProLiant Data Protection Storage Serv
ページ4に含まれる内容の要旨
NOTE: Service Release 5.6 does not apply to HP ProLiant Storage Servers running Microsoft Windows Storage Server 2003 R2. Microsoft iSCSI Software Target 3.1 is an update only for HP ProLiant Storage Servers with Microsoft iSCSI Software Target 3.0 installed. Microsoft Windows Unified Data Storage Server 2003 Supplemental Update applies to HP ProLiant Storage Servers running Microsoft Windows Unified Data Storage Server 2003 x64 Enterprise Edition. Product models These release notes apply to the s
ページ5に含まれる内容の要旨
Microsoft Windows Storage Server 2003 R2 x64 Editions Microsoft Windows Unified Data Storage Server 2003 Enterprise x64 Edition Languages The Service Release is available in the following languages: • French • Italian • German • Japanese • Korean • Simplified Chinese • Spanish • Traditional Chinese Issues and workarounds Issues and their workarounds have been identified and placed into categories. These categories are: • General installation issues • Installation issues on systems using Windows Sto
ページ6に含まれる内容の要旨
Issue: Install Shield Error 1607/1628 during Service Release installation Installation error 1607: Unable to install Install Shield Scripting Runtime and/or 1628: failed to complete installation may be reported during installation of the Service Release. This Description error can occur for various reasons, the most prevalent being a driver did not exit properly when the Service Release is run the first time. This issue is currently under investigation. ce Release again after ensuring that no ins
ページ7に含まれる内容の要旨
Providing a mapped drive with a disconnected network path might hang the HP Service release Issue: Wizard If you provide a mapped drive assigned to a network path that is disconnected Description from the Settings page of the HP Service Release Wizard, it might hang during the installation process. • Provide the complete network path URL as the path. or Workaround • Reconnect the network path for the mapped drive in Windows Explorer. Issue: A reboot message is displayed even though the progress
ページ8に含まれる内容の要旨
HP NAS Updater installed in previous Service Releases cannot be used to install Service Release Issue: 6.6 The HP NAS Updater installed with previous Service Releases cannot be used to launch Service Release 6.6. Attempting to install Service Release 6.6 with the Description older utility might result in the error message Version of NAS Updater on this system does not support installation. Please install latest version of NAS Updater. Install the HP Service Release Wizard bundled with Service Re
ページ9に含まれる内容の要旨
After installing the prerequisite components of HP Service Release 6.6, the wizard Description will prompt for a restart. After the restart, the wizard might not start automatically. Start the wizard manually by selecting the HP Service Release Wizard on the desktop. Alternately, the wizard can be started through Start > Program > HP Workaround Service Release > HP Service Release Wizard. This problem will be corrected in the next release. HP Service Release setup does not automatically lauch th
ページ10に含まれる内容の要旨
• Java Runtime Environment Update, version 1.6.0 Update 2 • HP Service Release Wizard NOTE: Some of the following enhancements and updates may not apply to your storage server. HP ProLiant Smart Component Updates x86 Editions The ProLiant Smart Component updates are from the ProLiant Support Pack for Microsoft Windows Server 2003 x86 Editions, version 7.90. • CP007671: HP System Management Homepage for Windows • CP007541: HP ProLiant iLO Advanced and Enhanced System Management Controller Driver
ページ11に含まれる内容の要旨
• CP007524: HP ProLiant Remote Insight Board Driver for Windows • CP007600: HP NC31xx Fast Ethernet NIC Driver for Windows Server 2003 • CP007444: HP ProLiant ATI RAGE XL Video Controller Driver for Windows Server 2003 • CP007660: HP NC-Series Intel N1E Driver for Windows Server 2003 • CP007459: ATIES1000VideoControllerDriverforWindowsServer2003 • CP007924: HP ProLiant Smart Array SAS/SATA Event Notification Service for Windows Server 2003 • CP007339: High Precision Event Timer Support for ProLia
ページ12に含まれる内容の要旨
• CP007671: HP System Management Homepage for Windows • CP007776: HP ProLiant Remote Monitor Service for Windows • CP007744: HP ProLiant Integrated Management Log Viewer for Windows • CP007578: HP ProLiant Array Configuration Utility for Windows • CP007433: HP ProLiant Array Diagnostics Utility for Windows • CP007432: HP ProLiant Array Configuration Utility (CLI) for Windows • CP007755: HP Version Control Agent for Windows • CP007530: HP ProLiant IPMI Provider • CP008024: PCI-express Power Managem
ページ13に含まれる内容の要旨
System Drivers and Components The System Drivers and Components includes other software, drivers and management agents for your HP ProLiant Storage Server. • Intel NIC drivers and Intel ProSet for Windows Device Manager version 12.1 • HP Server Management System for Windows, version 2.0.2 • Broadcom NetExtreme BCM57xx NIC driver version 10.24 • Broadcom Advanced Control Suite 2 (BACS) version 8.1.51.0 • HP SATA RAID Controller Manager (HPSM) version 4.10–4590 • Adaptec SATA RAID 2410 Device Driv
ページ14に含まれる内容の要旨
Microsoft Service Packs ThefollowingMicrosoftServicePacksareavailablewiththeServiceRelease6.6: • KB914961: Microsoft Windows Server 2003 Service Pack 2 (available on the Service Release DVD only) • KB923706: Microsoft System Center Data Protection Manager 2006 Service Pack 1 (HP ProLiant Data Protection Storage Servers only) Microsoft Component Updates • Microsoft iSCSI Software Target 3.1 • Support for Active/Active clustering •MicrosoftiSCSI Software Target Multilingual User Interface • Suppor
ページ15に含まれる内容の要旨
• KB899522: The POSIX subsystem process, Korn shell scripts, and Interix applications can fail after you install Windows Server 2003 Service Pack 1 on a computer that is running Windows Services for UNIX 3.5. • KB894537: Windows-based applications may not be notified of file changes when the changes are made by using Server for NFS in Windows Services for UNIX 3.5. • KB904838: FixforWindowsServicesforUNIX3.5. • KB910330: Modifies the formulas that DPM 2006 uses to allocate space for shadow copy sto
ページ16に含まれる内容の要旨
• KB927891: You receive an access violation error and the system may appear to become unresponsive when you try to install an update from Windows Update or from Microsoft Update • KB932596: Update to improve Kernel Patch Protection • KB936782: Vulnerability in Windows Media Player could allow remote code execution • KB938127: Vulnerability in Vector Markup Language Could Allow Remote Code Execution • KB933360: August 2007 cumulative time zone update for Microsoft Windows operating systems Supers
