ページ1に含まれる内容の要旨
AO-BTHD USER MANUAL
Please read carefully before use
1
ページ2に含まれる内容の要旨
AO-BTHD USER MANUAL TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS AND PRECAUTIONS ................................................................... 3 WHAT’S IN THE BOX .......................................................................................................................... 5 CHARGING THE AO-BTHD .................................................................................................................. 5 SWITCH ON /OFF THE AO-BTHD.................
ページ3に含まれる内容の要旨
AO-BTHD USER MANUAL IMPORTANT SAFETY INSTRUCTIONS AND PRECAUTIONS - Please read all instructions carefully before use - Please retain this manual for future reference - Use this product only in the manner described - Only use a water-dampened soft cloth to clean the surface of this product - The following will damage this product: any liquid such as water or moisture, extreme heat; cold; humidity, dusty or sandy environments -It is recommended to thoroughly charge thi
ページ4に含まれる内容の要旨
AO-BTHD USER MANUAL PRODUCT CONNECTIONS AND USE 1. Adjustable headband. 2. < next song / track 3. > last song / track 4. LED status Indicator 5. Multifunction Button (MFB) Switch On/Off the headset, Answer or Stop call, Voice dial, Last Number Redial, Pause or Play 6/7. + / - volume up / down 8. Mini USB port for charging 9. Microphone Built in, high sensitivity 4
ページ5に含まれる内容の要旨
AO-BTHD USER MANUAL WHAT’S IN THE BOX 1 x Bluetooth headset AO-BTHD 1 x Mini USB charge cable 1 x User manual 2 x Spare foam ear pads 1 x Carry case CHARGING THE AO-BTHD It is recommended to thoroughly charge this device before first use. Subsequent charges may be as required. Charging via USB cable • Ensure the AO-BTHD is turned off before charging • Connect the included USB cable into the mini USB port on the headphones. • Connect the other end of the USB cable to
ページ6に含まれる内容の要旨
AO-BTHD USER MANUAL PAIRING THE AO-BTHD WITH OTHER BLUETOOTH DEVICES Entering the pairing mode: Function Operation LED indicator Indication tone Make sure the headset is off. Enter pairing Press and hold MFB button for 6 Red and blue LED 2 x audible tones mode seconds, until the red and blue blinks alternately. LED blink alternately A: PAIRING AO-BTHD WITH MOBILE PHONE (HFP) Ensure your mobile phone has Bluetooth capability Pairing procedures may vary between bra
ページ7に含まれる内容の要旨
AO-BTHD USER MANUAL B: PAIRING AO-BTHD WITH IPAD /IPHONE • Please keep the headset and iPhone/iPad® within a range of 1 meter of each other whilst pairing. • Activate the headset pairing mode (hold the MFB (middle button) for 6 seconds - the red and blue LED will blink alternately) • In the iPhone/iPad home screen, select settings ，then general ，then Bluetooth • Swipe the on/off switch to on The message Now Discoverable will appear • The Headset should be identified by your
ページ8に含まれる内容の要旨
AO-BTHD USER MANUAL D: PAIRING AO-BTHD WITH MAC OS X 10 OR ABOVE • Activate the headset pairing mode: hold the MFB (middle button) for 6 seconds - the red and blue LED will blink alternately • From the Setup Bluetooth Device in the Bluetooth status menu / menu bar, follow the onscreen instructions to help pair your headset. Note: If the Bluetooth status menu is not available, open Bluetooth Preference and select the Show Bluetooth status in the menu bar checkbox. • As
ページ9に含まれる内容の要旨
AO-BTHD USER MANUAL RE-CONNECTING TO A BLUETOOTH DEVICE • Automatic connecting: Every time the AO-BTHD is switched on, it will connect to last connected device automatically • Manually connecting to the last connected HFP device: When the AO-BTHD is in standby mode and doesn’t connect to any HFP devices, press the MFB button twice, it will connect to the last connected device automatically Note: Before connecting to a Bluetooth device, please enable the device’s Bluetooth fun
ページ10に含まれる内容の要旨
AO-BTHD USER MANUAL relevant menu. Please refer to the instruction manual of your mobile phone for further information CONTROLS FOR MUSIC Once the AO-BTHD headset connects with a music device (such as an iPod touch, iPhone or Smartphone) high quality stereo music can be transmitted to the headset with volume and track playback functions controlled from the headset: Function Status of headset Operation Pause Playing music press the MFB button Play Pause press the MFB butt
ページ11に含まれる内容の要旨
AO-BTHD USER MANUAL Blue LED quickly blinks twice every 1 second. The headset is not connected to a device Blue and Red LED quickly blinks three times Set up HFP and A2DP connection every 2 seconds Red LED blinks twice every 20 seconds Low power Tone indicator Status of the headset an alert tone sounds every 20 seconds Power is low SPECIFICATIONS Flexible overhead band Rubberized underside band for grip Moisture sealed rubber buttons Construction High integrity
ページ12に含まれる内容の要旨
AO-BTHD USER MANUAL Speaker sensitivity 93 +-3dB At 1KHz No. of Paired Devices: 1 Pairing Pairing passkey: 0000 PC /Mac with Bluetooth functionality iPod/iPad iPhone 3G, 3GS, 4, 4S and beyond Compatible Products MP3 Players with Bluetooth functionality Bluetooth Mobile Phones PlayStation 3 TROUBLE SHOOTING / Q & A I always find configuring Bluetooth For the first time user, we recommend software to be very difficult. Do you have that you read these instructions carefu
ページ13に含まれる内容の要旨
AO-BTHD USER MANUAL Warranty Against Defects Laser Corporation Pty Ltd (“Laser”) warrants your new product to be free from defects in materials and workmanship for 12 months, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. The benefit of this warranty is in addition to your rights under the Australian Consumer Law and to other rights and remedies of the consumer under a law in relation to
