ページ1に含まれる内容の要旨
MOTOROLA
ENDEAVOR HX1
Quick Start Guide
ページ2に含まれる内容の要旨
congratulations Talk hands free where you never have before on the MOTOROLA ENDEAVOR HX1 headset thanks to Motorola’s revolutionary CrystalTalk™ technology with a stealth mode, delivering an unmatched headset audio performance even in the fiercest conditions. First of all, reduce everyday background noise with the default CrystalTalk mode which utilizes dual microphone noise cancellation technology. Then, if background noise and wind reach extreme levels, switch on stealth mode to activa
ページ3に含まれる内容の要旨
your headset your headset Take a moment to familiarize yourself with your new ENDEAVOR HX1 Headset. Earhook Volume Buttons Ear Loop Speaker and Charging stealth Port mode sensor Call Indicator Button Light stealth mode Power button Switch Warning: DO NOT apply pressure or squeeze the stealth mode sensor (small rubber balloon) as it can damage the parts inside and will void the warranty. 1
ページ4に含まれる内容の要旨
charge it charge it You'll need to charge your headset before you can use it. While charging, the battery indicator light is red. It turns green when the battery is fully charged. Note: Headset is not functional while charging. Note: Your battery is designed to last the life of your product. It should only be removed by a recycling facility. Any attempt to remove or replace your battery will damage your headset. 2
ページ5に含まれる内容の要旨
pair & connect pair & connect Let’s get your headset paired and connected to your Bluetooth phone(s). pair & connect first phone 1 Turn off any Bluetooth devices previously paired with your headset. 2 Turn on the Bluetooth feature on your phone. 3 Put the headset on your ear (see “wear it” on page 11 for help). 4 Turn on your headset (see page 15 for help). The indicator light becomes steadily lit in blue and you hear “ready to pair”. 3
ページ6に含まれる内容の要旨
pair & connect 5 Follow voice prompts to connect your phone to your headset. Note: When prompted for the passkey, enter 0000. When your headset successfully pairs with your phone, you hear “pairing complete”. When connected, you hear “phone 1 connected” and see the indicator light rapidly flash in blue and purple. pair & connect second phone (optional) 1 Turn off first phone and any other Bluetooth devices previously paired with your headset. 2 Turn your headset off (see “turn off” on
ページ7に含まれる内容の要旨
pair & connect 3 Turn on the Bluetooth feature on your phone. 4 Put headset on your ear. 5 Turn on your headset. The indicator light becomes steadily lit in blue and you hear “ready to pair”. 6 Follow voice prompts to connect your phone to your headset. When your headset successfully pairs with your phone, you hear “pairing complete”. When connected, you hear “phone 1 connected” and see the indicator light rapidly flash in blue and purple. To connect to both phones, simply turn on the fi
ページ8に含まれる内容の要旨
pair & connect connected”, your headset is connected to both phones. The last paired phone (your second phone) is now your primary phone (or “phone 1”) for voice dial functionality. test your connection 1 Place the headset on your ear. 2 On one phone, dial a number and press the Call/Send key. Repeat for the second phone. If your phone and headset are successfully connected, you hear ringing on the headset. For daily use, make sure your headset is turned on, and your phone’s Bluetooth
ページ9に含まれる内容の要旨
enable stealth mode enable stealth mode Be sure you are always heard during calls with both CrystalTalk and stealth modes: • CrystalTalk is the default mode and is always active to cancel out everyday background noise. � Stealth mode can be activated when noise and wind reach extreme levels to seal off all background noise. turn stealth mode on & off To activate stealth mode, press the dedicated stealth mode button while dialing a call, receiving a call, or while in a call. To deactiva
ページ10に含まれる内容の要旨
enable stealth mode A voice prompt (“stealth mode on” or “stealth mode off”) or tone always confirms change to stealth mode status. Note: When using stealth mode, it is essential that the stealth mode sensor is placed correctly and is in contact with the ear canal (see step 3 on page 12). It is normal for the sound of your voice to be less “natural” in stealth mode. 8
ページ11に含まれる内容の要旨
put it on put it on choose an ear fitting Your headset comes with both loop- and spring-type ear fittings. Left Right Medium Small Ear Ear Ear Ear Spring Spring Loop Loop To get the best headset performance, try out all the supplied ear fittings to get a good fit. To change your ear fitting: 9
ページ12に含まれる内容の要旨
put it on 1 Lift loop up and slide it off the headset in an upward direction. 2 Slide new fitting downward onto earpiece, then align and push bottom into groove. 10
ページ13に含まれる内容の要旨
put it on 3 Position earhook for left or right ear. For Right Ear For Left Ear wear it 1 Grasp headset and bend spring or loop. 11
ページ14に含まれる内容の要旨
put it on 2 Insert headset earpiece into your ear canal. 3 Ensure stealth mode sensor is in contact with your ear canal. stealth mode sensor Ear canal 12
ページ15に含まれる内容の要旨
put it on 4 Place spring or loop in bend of your ear. Using Spring Using Loop 13
ページ16に含まれる内容の要旨
put it on 5 Flex the earhook and loop it over your ear. Tip: For the best audio performance and comfort, position the ear cushion into your ear canal and point the headset microphone towards your mouth. 14
ページ17に含まれる内容の要旨
turn on & off turn on & off turn on Slide the Power switch to the on position (no red is shown under the switch). The indicator light flashes blue three times, then flashes in blue and purple (if connected with a device) or is steadily blue (if ready to be paired). Power Switch Indicator Light turn off Slide the Power switch to the off position (red is shown under switch). The indicator light flashes three times then turns off. 15
ページ18に含まれる内容の要旨
battery check battery check Press and hold both Volume buttons while not on a call. indicator voice prompttalk time light red “battery level is less than 2 low” hours yellow “battery level is between 2 to medium” 4.5 hours green “battery level is more than 4.5 high” hours To save battery power, turn off the headset when you don't use it for an extended time. 16
ページ19に含まれる内容の要旨
calls calls To... answer call Press the Call button. reject call Press and hold a Volume button until you hear a tone. make a voice Press the Call button and you dial call hear a tone. redial last call Press and hold the Call button until you hear a tone. mute or Press and hold both Volume unmute a call buttons until you hear “mute on” or “mute off”. end a call Press the Call button. answer second Press the Call button. You hear incoming call a tone and the currently active call is place
ページ20に含まれる内容の要旨
calls To... reject second Press and hold a Volume incoming call button until you hear a tone. enable or Press the stealth mode disable stealth button during a call until you mode hear “stealth mode on” or “stealth mode off”. Tip: When connected to two phones, voice prompts help manage call functions such as voice dial, redial, and end call. Follow the voice prompts to execute a function on the desired phone. Tip: Your headset supports both Handsfree and Headset Profiles. Accessing call f
