ページ1に含まれる内容の要旨
Getting Started Guide
™
for the V500 System
July 2004 Edition
3725-21742-002/A
ページ2に含まれる内容の要旨
GETTING STARTED GUIDE FOR THE V500 SYSTEM Trademark Information ™ Polycom® and the Polycom logo design are registered trademarks of Polycom, Inc., and V500 and ™ VSX are trademarks of Polycom, Inc. in the United States and various other countries. All other trademarks are the property of their respective owners. Patent Information The accompanying product is protected by one or more U.S. and foreign patents and patents pending held by Polycom, Inc. Polycom Siren™ 14 (patent pending). ©
ページ3に含まれる内容の要旨
Contents System Basics.......................................................................................1 Using the Remote Control...................................................................................................... 1 Getting More Information ...................................................................................................... 3 Calling and Answering ..........................................................................3 Answering a Video Call..
ページ4に含まれる内容の要旨
GETTING STARTED GUIDE FOR THE V500 SYSTEM Scheduling Meetings...........................................................................18 Customizing Your Workspace .............................................................19 Specifying When to Display the PIP....................................................................................... 19 Displaying the Far Site’s Name When the Call Connects ........................................................... 20 Hearing Audio Confirmat
ページ5に含まれる内容の要旨
Getting Started Guide ™ for the V500 System When you connect a Polycom® V500 system to your TV, you’re providing your home office or small business with all the essential tools you need for video conferencing. With a V500 system, you can meet with people anywhere in the world, as if they were in the room with you. Everyone’s productivity increases, without any travel required. It’s easy to place video calls with the V500 system. You also have the flexibility to create your own
ページ6に含まれる内容の要旨
GETTING STARTED GUIDE FOR THE V500 SYSTEM V500 System Remote Control Place a call End a call Confirm your current selection; Navigate through menus perform functions on highlighted items Return to the Place a Call Return to the previous screen (home) screen Increase or decrease the sound you hear from the far site Mute the sound you’re Show, move or hide the sending to the far site Picture-in-Picture (PIP) See the video in the full screen; swap the video between the
ページ7に含まれる内容の要旨
CALLING AND ANSWERING Getting More Information If you need additional information about using the V500 system, try these resources: To view help while you’re using the system, press Help. For network questions, contact your network service provider. For system questions, contact Polycom Technical Support at www.polycom.com/support. Calling and Answering Answering a Video Call When a call comes in, you hear a ringing sound, and you may see a message that includes the number of th
ページ8に含まれる内容の要旨
GETTING STARTED GUIDE FOR THE V500 SYSTEM Placing a Video Call You can use your system to place a video call in any of these ways: Using the directory Entering a name or number Choosing from a list of recently called sites Choosing a site from the Contacts or Speed Dial list on the Place a Call screen, if you have configured your system to have one Calling by Using the Directory The directory is a list of names and numbers that’s stored locally on the V500 system. When a call end
ページ9に含まれる内容の要旨
CALLING AND ANSWERING Calling by Entering a Name or Number To place a call by entering a name or number: 1. From the Place a Call screen, enter one of these: • The ISDN number (for example, 19784444321). • The system name (for example, Ascot Conference Room). • The IP address (for example, 255.255.255.255). The system automatically determines the type of call to make based on the information you enter. To learn about entering characters, see Using the Remote Control on page 1. 2. Ente
ページ10に含まれる内容の要旨
GETTING STARTED GUIDE FOR THE V500 SYSTEM Calling from the Recent Calls List Depending on how you configured your system, you may be able to choose a number to call from a list of the sites you have called recently. The Recent Calls screen provides details of all incoming and outgoing calls, including the time of the calls. To place a call from the Recent Calls screen: 1. Select Recent Calls from the Place a Call screen. 2. Scroll to the entry you want to call. Call to place the call.
ページ11に含まれる内容の要旨
CALLING AND ANSWERING Types of Video Calls You Can Make Depending on the V500 system model you purchased, you may be able to make either ISDN or IP calls (or both). The following table lists all possible call combinations. From… You can call… By dialing… ISDN ISDN Phone number IP Phone number of the far-site gateway and the extension (E.164 address) of the far site. Enter the extension in the Extension field, after the gateway number, or wait until the gateway prompts you for the e
ページ12に含まれる内容の要旨
GETTING STARTED GUIDE FOR THE V500 SYSTEM Placing and Ending an Audio-only Call If you have an ISDN line connected to your V500, you can use your system to make audio-only calls in addition to using your system to place video calls. Placing an Audio-only Call To place an audio-only call from your system: 1. On the Place a Call screen, enter the number you want to call. To place a call within your PBX system, enter the last four digits of the number. To delete a digit, press Delete
ページ13に含まれる内容の要旨
CONTROLLING WHAT YOU SEE Controlling What You See You can control what you see during a call by moving and focusing your camera, switching views, and adjusting the PIP. Adjusting a Camera You can pan and tilt the camera manually, and you can use the focus wheel to focus the camera. To adjust the camera: 1. Adjust the camera by moving the camera up, down, to the left, or to the right: 2. Focus the camera by turning the focus wheel: © Polycom, Inc. 9
ページ14に含まれる内容の要旨
GETTING STARTED GUIDE FOR THE V500 SYSTEM Switching Between Full Screen Video and the Home Screen Before the call connects, you see the near video in a small window on the Place a Call (Home) screen. When the call connects, the system automatically shows the video in the whole screen. You can switch back to the Place a Call screen during a call, for example, if you need to adjust a user setting, and your system is configured to allow you to do so. To learn about adjusting user settings,
ページ15に含まれる内容の要旨
CONTROLLING WHAT YOU HEAR Controlling What You Hear Adjusting Volume During a call, you use the remote control to raise or lower the volume of the sound you hear. Changing the volume affects only the sound you hear at your site. To adjust the volume: >> Press Volume on the remote control. Muting the Microphone You can mute the microphone if you do not want the far site to hear what you say. For example, you might mute the microphone if you want to speak to someone privately. To mute
ページ16に含まれる内容の要旨
GETTING STARTED GUIDE FOR THE V500 SYSTEM Working with Directory Entries The directory on your V500 system stores dialing information that helps you make calls quickly and easily. When a site listed in the directory calls your system, the system displays the name on the screen when the call comes in. If a site that calls you is not listed in the directory, you are prompted to save the call information in the directory when the call ends. If your system is registered with a global director
ページ17に含まれる内容の要旨
WORKING WITH DIRECTORY ENTRIES 3. Specify the following information: In this field… Enter this information… Name Name that will appear in the directory list and on incoming call messages. Number ISDN number to use for calling the site. Call Quality Call speed to use for ISDN calls to the site. IP Number IP address for calling the site. Extension The system’s gateway extension. Call Quality Call speed to use for IP calls to the site. Phone Number Optional contact information for other
ページ18に含まれる内容の要旨
GETTING STARTED GUIDE FOR THE V500 SYSTEM Categorizing Directory Entries When you categorize your local entries, you can find calling information quickly by searching just the entries in a category instead of the whole directory. To create a new category: 1. Select Directory from the Place a Call screen. 2. Select Category. 3. Select Edit Category. 4. Enter a category name. 5. Press Back to save the new category. To delete a category: 1. Select Directory from the Place a Call scree
ページ19に含まれる内容の要旨
PARTICIPATING IN CALLS WITH MULTIPLE SITES Supplying a Password for External MCU Calls External MCUs sometimes require you to enter a password in order to join a conference. For this type of call, you can configure the system to enter the meeting password for you. To configure a meeting password: 1. Select System from the Place a Call screen. 2. Select User Settings from the System screen. 3. Enter the password in the Meeting Password field in one of these ways: Pressing the remote c
ページ20に含まれる内容の要旨
GETTING STARTED GUIDE FOR THE V500 SYSTEM 5. Select a site from the list and then use the controls in the web interface to perform one of these actions: If you are… You can Do This… By Selecting… Chair Pass chair controls to the selected Release Chair controller site View the selected site’s video. This View Site does not change what other sites see. Return to viewing the video Stop Viewing selected by the chair or the MCU Site Send the selected site’s video to the Select other site
