ページ1に含まれる内容の要旨
4-452-002-21(5)
Getting Started
Home Theatre
Operations and Features
System
BLUETOOTH Function
Operating Instructions
Surround Function
Advanced Settings
Additional Information
HT-CT660
ページ2に含まれる内容の要旨
Notice for customers: the WARNING following information is only applicable to equipment sold in Do not install the appliance in a confined countries applying EU space, such as a bookcase or built-in directives. cabinet. This product has been manufactured by or on behalf of Sony Corporation, 1-7-1 To reduce the risk of fire, do not cover the Konan Minato-ku Tokyo, 108-0075 Japan. ventilation opening of the appliance with Inquiries related to product compliance newspapers, tablecloths,
ページ3に含まれる内容の要旨
By ensuring these batteries are disposed Disposal of Old of correctly, you will help prevent Electrical & potentially negative consequences for Electronic the environment and human health Equipment which could otherwise be caused by (Applicable in inappropriate waste handling of the the European battery. The recycling of the materials will Union and other help to conserve natural resources. European In case of products that for safety, countries with performance or data integrit
ページ4に含まれる内容の要旨
buildup and prolong the life of the system. Precautions
=>Do not place the system near heat sources, or in a place subject to direct On safety sunlight, excessive dust, or mechanical
=> Should any solid object or liquid fall into shock. the system, unplug the system and
=> Do not place anything at the rear of the have it checked by qualified personnel Sound Bar that might block the before operating it any further. ventilation holes and cause
=>Do not climb on the Sound Bar or the malfunct
ページ5に含まれる内容の要旨
scouring powder or solvent such as “WALKMAN” and “WALKMAN” logo are alcohol or benzine. registered trademarks of Sony Corporation. If you have any question or problem concerning your system, please consult “PlayStation ” is a registered trademark ® your nearest Sony dealer. of Sony Computer Entertainment Inc. The N Mark is a trademark or registered Copyrights trademark of NFC Forum, Inc. in the United States and in other countries. This system incorporates Dolby* Digital and the DTS** Dig
ページ6に含まれる内容の要旨
Effective communication range
=> In hospitals, on trains, in airplanes, at gas stations, and any place where BLUETOOTH devices should be used flammable gasses may be present within approximately 10 meters
=> Near automatic doors or fire alarms (unobstructed distance) of each other. The effective communication range Notes may become shorter under the
=> This system supports security functions following conditions. that comply with the BLUETOOTH
=> When a person, metal object, wall or specif
ページ7に含まれる内容の要旨
Table of contents Precautions ...............................4 Additional Information BLUETOOTH wireless Troubleshooting .....................30 technology .......................... 5 Specifications .......................... 33 Index ........................................36 Getting Started Unpacking .................................8 Index to parts and controls ...... 9 Connecting a TV, player, etc. ......................................13 Positioning the system ...........15 Setting up th
ページ8に含まれる内容の要旨
Getting Started Unpacking
=> Subwoofer (SA-WCT660) (1) Inserting batteries into the remote control Insert two R6 (size AA) batteries (supplied) by matching the and ends on the batteries to the diagram inside the battery compartment of the remote control. To use the remote
=> Sound Bar (SA-CT660) (1) control, point it at the remote control sensor at the front of the Sound Bar.
=> Digital optical cable for a TV (1)
=> Side stand (for front-facing installation) (2) Notes
=> Side stand (for
ページ9に含まれる内容の要旨
Getting Started Index to parts and controls For more information, see the pages indicated in parentheses. Sound Bar (on/standby) button Message display area Displays volume, selected input PAIRING button (page 22) source, etc. INPUT button NIGHT (page 27) Press to select the input source to Lights up in NIGHT mode. play back. HDMI VOL (volume) +/ buttons Lights up when an HDMI signal is N mark selected as the input source. (remote control sensor) OPT Illumination LE
ページ10に含まれる内容の要旨
Jacks (on the rear of Sound Bar) AC power cord (mains lead) OPTICAL IN jack (page 13, 14) (page 13) HDMI TV OUT (ARC) jack HDMI IN 1/IN 2 jacks (page 13) (page 13) ANALOG IN jack (page 14) HDMI IN 3 jack (page 13) Subwoofer (on/standby) indicator (on/standby) button LINK button (page 29) AC power cord (mains lead) (page 13) GB 10
ページ11に含まれる内容の要旨
Getting Started To control the system Remote control (input) (page 18) Press to select the equipment you This section describes how to operate want to use. the subwoofer, Sound Bar, and (on/standby) connected equipment using the remote control supplied. If you cannot SOUND FIELD +/ (page 25) operate the connected equipment, SOUND FIELD (page 25) use the remote control of the DISPLAY equipment. Each time you press the button, the display turns on or off. Note When the syst
ページ12に含まれる内容の要旨
To control a BLUETOOTH device 2 While keeping TV held down, press . / To go to the beginning of the 3 Release TV . previous or next music. / To fast reverse or to fast forward the music when pressed during playback. Playback operation * (playback)/ (pause)/ (stop) Starts/pauses/stops playback. To resume normal playback during pause, press (pause) again. Note The above explanations are intended to serve as an example only. Depending on the equipment, the above
ページ13に含まれる内容の要旨
Getting Started Connecting a TV, player, etc. Before connecting the AC power cord (mains lead) to a wall outlet (mains), connect all other equipment and a TV to the system. No cable connection is required between the Sound Bar and the subwoofer because they can be connected wirelessly. Connecting a TV If you connect the system to a TV compatible with the Audio Return Channel (ARC) technology via an HDMI input jack with “ARC” indicated, you do not need to connect a digital optical cable. If
ページ14に含まれる内容の要旨
Tip
=>Even if the system is turned off (active standby mode), the HDMI signal will be sent from the connected equipment to the TV via the HDMI connection. You can enjoy image and sound from the equipment on the TV. Connecting equipment with an HDMI jack HDMI OUT HDMI cable (not supplied) “PlayStation 3,” Blu-ray Disc™ player, ® DVD player, satellite tuner, cable television tuner, etc. Connecting audio equipment Audio signal OUT Audio cable (not supplied) Smartphone, “Walkman,” or other aud
ページ15に含まれる内容の要旨
Getting Started Positioning the system The illustrations below are examples of how to install the Sound Bar. Installing the Sound Bar
=> Installing the Sound Bar on a rack
=> Installing the Sound Bar on a wall (page 16) (page 16) Notes
=>Take following precautions when installing the Sound Bar and the subwoofer. Do not block the ventilation holes on the rear panel. Do not place the Sound Bar and the subwoofer in a metal cabinet. Do not place an object such as an aquarium between the Sound Ba
ページ16に含まれる内容の要旨
2 Attach a side stand (for upward- Installing the Sound Bar on tilting installation) to each side. a rack To install the Sound Bar facing front 1 Attach a side stand (for front- facing installation) to each side. Installing the Sound Bar on a wall You can install the Sound Bar on the wall. Notes
=> Use screws that are suitable for the wall To install the Sound Bar tilting material and strength. As a plaster upward board wall is especially fragile, attach the screws securely to a wall beam
ページ17に含まれる内容の要旨
Getting Started 1 Prepare screws (not supplied) 4 Hang the Sound Bar onto the that are suitable for the holes on screws. the back of the Sound Bar. Align the holes on the back of the Sound Bar to the screws, then hang the Sound Bar onto the 4 mm 2screws. More than 25 mm 5mm 9mm Setting up the Wireless Hole on the back of the Sound Bar System 2 Fasten the screws to the wall. The Sound Bar transmits sound from The screws should protrude 6 to the equipment to the subwoofer by 7 mm. wireles
ページ18に含まれる内容の要旨
Using the Control for Operations and Features HDMI function Operating the system By enabling the Control for HDMI function (CTRL, page 27), and using the supplied connecting equipment that is remote control compatible with the Control for HDMI function via an HDMI cable, operation is simplified with the features below. 1 Turn on the system. 2 Press to display the input System Power Off source on the front panel display of the Sound Bar. When you turn off the TV using the power butto
ページ19に含まれる内容の要旨
Operations and Features One-Touch Play Using “BRAVIA” Sync When you play the equipment features connected to the system with an HDMI cable, the connected TV is turned on The original Sony functions listed automatically and the input signal of below can also be used with products the system is switched to the that are compatible with “BRAVIA” appropriate HDMI input. Sync. Notes
=>The above features may not operate Power save with certain equipment.
=>Depending on the settings of the If a
ページ20に含まれる内容の要旨
HDMI jack may be suppressed by the connected equipment. Setting up the sound
=> Sound may be interrupted when the sampling frequency or the number output of the connected of channels of audio output signals equipment from the playback equipment is switched. To output multi-channel digital audio,
=> When the connected equipment is check the digital audio output setting not compatible with copyright on the connected equipment. protection technology (HDCP), the For details, refer to the o
