Walker Edison Multi-Level Glass Component Stand V35CMPの取扱説明書

ページ1に含まれる内容の要旨

Item #: V35CMP
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 11/2010

ページ2に含まれる内容の要旨

Parts List

ページ3に含まれる内容の要旨

Hardware List

ページ4に含まれる内容の要旨

Carefully lay glass top (1) upside down on a soft surface. Screw short rods (B) into the metal plates of glass top (1). Screw cylinders (6) onto short rods (B).

ページ5に含まれる内容の要旨

Screw long rods (A) into cylinders (6). Snap decorative rings (C) onto cylinders (6).

ページ6に含まれる内容の要旨

Carefully lay glass shelf (2) in place using long rods (A) as guides. Place decorative rings (C) over long rods (A). Screw cylinders (5) onto long rods (A). Note that cylinders (5) will fit snuggly inside the decorative rings placed in the previous step.

ページ7に含まれる内容の要旨

Screw long rods (A) into cylinders (5). Snap decorative rings (C) onto cylinders (5).

ページ8に含まれる内容の要旨

Carefully lay glass shelf (2) in place using long rods (A) as guides. Place decorative rings (C) over long rods (A). Screw cylinders (3) onto long rods (A). Note that cylinders (3) will fit snuggly inside the decorative rings placed in the previous step.

ページ9に含まれる内容の要旨

Screw long rods (A) into cylinders (3). Snap decorative rings (C) onto cylinders (3).

ページ10に含まれる内容の要旨

Carefully lay glass shelf (2) in place using long rods (A) as guides. Place decorative rings (C) over long rods (A). Screw cylinders (4) onto long rods (A). Note that cylinders (4) will fit snuggly inside the decorative rings placed in the previous step.

ページ11に含まれる内容の要旨

Screw long rods (A) into cylinders (4). Snap decorative rings (C) onto cylinders (4).

ページ12に含まれる内容の要旨

Carefully lay glass shelf (2) in place using long rods (A) as guides. Place decorative rings (C) over long rods (A). Screw cylinders (7) onto long rods (A). Note that cylinders (7) will fit snuggly inside the decorative rings placed in the previous step.

ページ13に含まれる内容の要旨

Insert caps (D) into cylinders (7). Note that caps (D) may come pre-inserted into cylinders (7).