Walker Edison Multi-Level Glass Component Stand V35CMP user manual

Summary of the content on the page No. 1

Item #: V35CMP
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 11/2010

Summary of the content on the page No. 2

Parts List

Summary of the content on the page No. 3

Hardware List

Summary of the content on the page No. 4

Carefully lay glass top (1) upside down on a soft surface. Screw short rods (B) into the metal plates of glass top (1). Screw cylinders (6) onto short rods (B).

Summary of the content on the page No. 5

Screw long rods (A) into cylinders (6). Snap decorative rings (C) onto cylinders (6).

Summary of the content on the page No. 6

Carefully lay glass shelf (2) in place using long rods (A) as guides. Place decorative rings (C) over long rods (A). Screw cylinders (5) onto long rods (A). Note that cylinders (5) will fit snuggly inside the decorative rings placed in the previous step.

Summary of the content on the page No. 7

Screw long rods (A) into cylinders (5). Snap decorative rings (C) onto cylinders (5).

Summary of the content on the page No. 8

Carefully lay glass shelf (2) in place using long rods (A) as guides. Place decorative rings (C) over long rods (A). Screw cylinders (3) onto long rods (A). Note that cylinders (3) will fit snuggly inside the decorative rings placed in the previous step.

Summary of the content on the page No. 9

Screw long rods (A) into cylinders (3). Snap decorative rings (C) onto cylinders (3).

Summary of the content on the page No. 10

Carefully lay glass shelf (2) in place using long rods (A) as guides. Place decorative rings (C) over long rods (A). Screw cylinders (4) onto long rods (A). Note that cylinders (4) will fit snuggly inside the decorative rings placed in the previous step.

Summary of the content on the page No. 11

Screw long rods (A) into cylinders (4). Snap decorative rings (C) onto cylinders (4).

Summary of the content on the page No. 12

Carefully lay glass shelf (2) in place using long rods (A) as guides. Place decorative rings (C) over long rods (A). Screw cylinders (7) onto long rods (A). Note that cylinders (7) will fit snuggly inside the decorative rings placed in the previous step.

Summary of the content on the page No. 13

Insert caps (D) into cylinders (7). Note that caps (D) may come pre-inserted into cylinders (7).