ページ1に含まれる内容の要旨
0210
- INSTRUCTIONS -
The IPW-1A offers voice-quality Intercom function over standard IP based networks. Designed specifically to integrate
seamlessly into a new or existing LAN / WAN infrastructure, the IPW-1A system is capable of supporting hundreds of
stations. Providing intercom/paging solutions to a large variety of applications including commercial, industrial,
residential, general security, office, and institutional.
NAMES & FEATURES
IPW-1A
NAMES & FUNCTIONS:
1. Reset switch (reset un
ページ2に含まれる内容の要旨
INSTALLATION & MOUNTING Installation Instructions: 1. If the IPW-1A adaptor is not on the same LAN or POWER network segment as the PC master station, ensure PT-1211C that the IPW-1A has been pre-programmed with the PWR proper connection settings prior to physical adaptor LAN IN0 IN1 NC C NO installation. See the CommuniCenter Operations manual (included on CD with IPW-1A). 2. Wire the sub station to the proper connector on the IPW-1A, and connect to the network using the Note: Contac
ページ3に含まれる内容の要旨
STATION SET-UP DHCP Enabled: An IP address will automatically be assigned to each IPW-1A with the default ID# as 0 and Location Name left blank. Right click on each station to open the drop down box, and select Settings. This will open the Hardware Configuration tool. Give each adaptor a unique ID# along with a unique Location Name. It is recommended that a password be set for each adaptor. This password can be the same for all adaptors in the LAN if you wish. To set the password, right click
ページ4に含まれる内容の要旨
Device running / normal operation: During normal operation, the Green LED will remain on while the Red LED will remain off. Pushing the reset button: Upon pressing the reset button, the Green LED and Red LED will remain on. If the reset button is held for 10 seconds or more, the Green LED will remain lit and the Red LED will blink, resetting the unit to factory defaults. Ethernet jack LED status Yellow: link is established Green: connected to 10Mbit network Orange: connected to 100Mbit network
