ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
SAFETY CONCERNS The purpose of the Safety Concerns section is to ensure the safety of users and prevent property damage. Please read this document carefully for proper use. Conventions Warning Provides information or instructions that you should follow in order to avoid personal injury or fatality. Caution Provides information or instructions that you should follow in order to avoid a service failure or damage to your phone. Note Indicates additional information for referren
ページ4に含まれる内容の要旨
Warning Doing so may cause a fire or electric shock. WARNING Power Do not use a damaged power plug, For the power connection port of cord, or a loose outlet. the phone, use the provided optional power adapter. Use of a power adapter that does not meet the specifications may cause the product to become damaged, to overheat, or to explode. Do not pull the product by the If there is dirt or moisture on the cord, bend the cord with force, and pin contact surface of a power do
ページ5に含まれる内容の要旨
Caution Doing so may cause the damage to the product and the product to be out of order. CAUTION Power Do not power off the phone while upgrading a program. General The LAN cable to the network Use a soft and dry cloth when should be connected to the LAN cleaning the phone. port of a phone, NOT to the PC Do not spray water directly onto connection port. the product; and do not use chemicals such as wax, benzene, alcohol, thinner, mosquito killer, perfume spray, lubrican
ページ6に含まれる内容の要旨
TABLE OF CONTENTS SAFETY CONCERNS 1 Conventions ...........................................................................1 Symbols..................................................................................1 Warning...................................................................................2 Caution....................................................................................3 PREPARATIONS 8 Check Package Items .....................................................
ページ7に含まれる内容の要旨
Call Status Information ................................................................20 Text Input Method............................................................... 21 BASIC FUNCTIONS 22 Dialing .................................................................................. 22 Dialing an Extension Number......................................................22 Dialing a Station Line Number ....................................................23 Dialing via Speaker Phone .........
ページ8に含まれる内容の要旨
Phonebook...................................................................................42 Call Log ........................................................................................48 Message.......................................................................................49 Conference...................................................................................53 Directory service ..........................................................................54 UC Menu...
ページ9に含まれる内容の要旨
TROUBLESHOOTING 79 ANNEX 81 Product Specifications....................................................... 81 REQUIRED PUBLIC STATEMENT FOR GPL/LGPL LICENSED SOFTWARE USED IN THIS PRODUCT........ 82 SMT-i5243 User Guide _7
ページ10に含まれる内容の要旨
PREPARATIONS Check Package Items Check that all the components below are contained in the product package box. Phone Body Wall-Mount Handset Phone Cradle LAN Cable Bracket(Option) Quick Guide User Manual CD Ferrite Core - If any components are damaged or missing, contact the dealer. - The power adapter is optional. If needing the power adaper, contact the dealer. 8_ © SAMSUNG Electronics Co., Ltd.
ページ11に含まれる内容の要旨
Phone Installation Connection to Back Ports If a headset is used, connect it to the headset port. 1 Connect a handset to the handset port. 2 Connect one end of the PC connection LAN cable, which was provided 3 with the phone, to the PC connection port of the phone. Connect the other end to the PC network port. Connect the LAN cable connected to the network to the LAN 4 connection port of the phone. - If power is supplied from the LAN port (PoE), the phone is booted up when
ページ12に含まれる内容の要旨
Assembling the Cradle The installation angle of a phone can be changed depending on the assembly direction of the cradle. Fix one latch of the cradle to the top or bottom groove of the phone. 1 Push the remaining latch into the remaining groove on the opposite side. 2 Place the phone on the installation location and check whether it shakes. 3 10_ © SAMSUNG Electronics Co., Ltd.
ページ13に含まれる内容の要旨
Assembling the Wall-Mount Bracket Assemble the wall-mount bracket where you want to use the phone. The wall-mount bracket is an optional item. If necessary, please contact your dealer. First, choose the location where you want to install the phone, and then 1 determine the positions of the screws by placing the phone at the target location on the wall. Remove the desk cradle of the phone. 2 Insert the wall-mount bracket as shown 3 in the figure. Pull off the handset ra
ページ14に含まれる内容の要旨
Detachment from the Wall-Mount Bracket This section describes how to detach the phone from the wall-mount bracket. You can detach the phone from the 1 bracket by pressing the [Push] section at the bottom of the bracket. - Detach the phone more easily by pulling the entire bottom of the bracket instead of only the [Push] section. Pull out the handset rack, change the 2 direction, and then insert it again. 12_ © SAMSUNG Electronics Co., Ltd.
ページ15に含まれる内容の要旨
BEFORE USE Key Functions Network The SMT-i5243 phone enables voice telecommunication through an already-installed data network, without requiring the installation of a separate telephone line. Therefore, it does not require the additional expense of maintaining telephone numbers, and can save on telephone costs for the businesses, and people, that use Network international phone calls frequently. Screen The SMT-i5243 phone displays various functions on an LCD screen. The fu
ページ16に含まれる内容の要旨
Call Hold When carrying out a complex job, or if another call is received while making a call, that call can be put on ‘hold’ temporarily or transferred to another person by using the call hold or call forward function. Conference If the [Conference] button is used during a conference, up to 5 people including the original caller can participate in the call. Call Forward A call can be forwarded to another number when the call cannot be received. Do Not Disturb If this
ページ17に含まれる内容の要旨
Parts and Names Front Configuration SMT-i5243 User Guide _15
ページ18に含まれる内容の要旨
Names and Functions Button Function Phone Status Indicator A red LED showing the phone’s status (busy, ringing, receiving an internal message, etc.). Bottom and right-side Used by the user to select their desired function from the , Selection buttons menus displayed on the LCD screen. Conference button Used to make a conference call. Transfer button Used to transfer a current call, or enter a function to a button on the AOM screen. Hold button Used to hold a call temporary with
ページ19に含まれる内容の要旨
Button Function LCD screen The configuration of LCD screen is as follows: - On the top of the screen, the icons representing phone function settings are displayed. - On the main screen, selectable menus, the call processing status, or various messages are displayed. - At the bottom of the screen, menus that the user can select depending on status are displayed. Status display Main screen Menu display Handset Transfers the caller’s voice. SMT-i5243 User Guide _17
ページ20に含まれる内容の要旨
Navigation Button and UC Dial The SMT-i5243 phone has navigation buttons and UC dial to allow users to use its functions easily. UC dial Navigation button Direction key OK button Button Function UC dial Left The user can set the phone to the unconditional call forward state. If a buddy server is connected, this is set to a busy status. Center The default standby status. Right This is set to ‘Do Not Disturb’ and in buddy rejection status. Navigation Direction key Used to edit
