ページ1に含まれる内容の要旨
Operator’s Manual
Big Eye Binoculars
20x40x100
105 Sparks Ave., Toronto, ON, M2H 2S5, Canada
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Table of Contents 1. BRIEF DESCRIPTION ................................ 2 2. SPECIFICATIONS....................................... 3 3. ASSEMBLY................................................. 4 8. STORAGE AND MAINTENANCE ............ 8 9. WARRANTY ............................................... 9 10. CUSTOMER SUPPORT ............................ 10
ページ4に含まれる内容の要旨
1. BRIEF DESCRIPTION The Big Eye Binoculars (hereinafter referred to as Big Eye) features high optical and technical characteristics. It is designed and intended for viewing distant objects under all climatic conditions. Two types of interchangeable eyepieces, 20x and 40x, provide different magnification depending on observer’s preferences. This model works in wide range of temperatures and humidity up to 98%. Caution: The binoculars should never be used to directly observe bright
ページ5に含まれる内容の要旨
2. SPECIFICATIONS Magnification 20x 40x Field of view, degrees 2.4 1.5 Apparent field of view, degrees 48 60 Exit pupil diameter, mm 5 2.5 Eye relief, mm 23 13 Eyepiece dioptre setting range, -5…+20 dioptres Interpupillary distance setting, mm 58-72 Light transmission (directed), min 70% Twilight index 44.72 63.25 Relative brightness 25 6.25 Resolution, angular seconds 2.45 2.76 Dimensions, binoculars only, mm 420x257x125 Net weight (without tripod), kg, max 7 Focusing distance
ページ6に含まれる内容の要旨
3. ASSEMBLY The binoculars appearance is shown on the Figure 1. It consists of the binocular itself, U-mount and tripod. 1. How to adjust the tripod The tripod height can be adjusted by locknuts (1). Loosen the locknuts (1) and pull out the legs (2) to get the desired height, and then tighten the locknuts. The locknuts should be reliably secured to mount the U bracket on the tripod. 2. How to mount the U bracket Put the model U bracket on platform of the tripod (3), and then f
ページ7に含まれる内容の要旨
7 Binoculars body 5 6 U-bracket 8 3 4 Tripod 1 2 Fig.1 5
ページ8に含まれる内容の要旨
3. How to mount the binoculars on the U bracket Place the bottom of the binoculars (5) on the U bracket and tighten the locknut (6). Tighten left and right locknuts (7) of the U bracket. 4. How to use the align the binoculars with the target Loosen the U bracket locknut (8) and rotate the binoculars around vertical axle. Aim the binoculars towards your target. Loosen locknuts (7) and adjust the vertical viewing angle respectively. Tighten back the locknuts (7) and (8). 5. How to
ページ9に含まれる内容の要旨
7. How to adjust the dioptres The diopter adjustment is performed by the knobs 10. The observer is supposed to find the diopter position suitable for his individual normal viewing. 7 7 9 9 10 Fig. 2 10 7
ページ10に含まれる内容の要旨
8. STORAGE AND MAINTENANCE Big Eye 20(40) x l00 high magnification binoculars are a precision optical instrument. It should be handled with utmost care when in operation, storage and transportation. When using and storing, the binoculars should be kept clean. If dust, grease or dirt is found on the glass surface, gently wipe it off with a piece of clean cloth or lens paper. It's forbidden to wipe lens off with fingers, ordinary paper or dirty cloth. In case of any malfunction, please
ページ11に含まれる内容の要旨
9. WARRANTY NEWCON warrants this product against defects in material and workmanship for one year from the date of the original purchase. Longer warranty is available, subject to the terms of the specific sales contract. Should your Newcon product prove to be defective during this period, please deliver the product securely packaged in its original container or an equivalent, along with the proof of the original purchase date to your Newcon Dealer. Newcon will repair (or at its optio
ページ12に含まれる内容の要旨
10. CUSTOMER SUPPORT Should you experience any difficulties with your NEWCON OPTIK product, consult this manual first. If the problem remains unresolved, contact our customer support department at (416) 663-6963 or toll free at 1- 877-368-6666. Our operating hours are 9am-5pm, Monday - Friday, Eastern Standard Time. At no time should equipment be sent back to Newcon without following the instructions of our technical support department. NEWCON OPTIK accepts no responsibility for una
ページ13に含まれる内容の要旨
ページ14に含まれる内容の要旨
R1 – 5.11 NEWCON OPTIK Printed in Canada
