Newcon Optik TVS 7Bの取扱説明書

ページ1に含まれる内容の要旨

This Product made by:
Newcon Optik
105 Sparks Ave
Toronto, Ontario,
M2H 2S5 Canada
Tel: 1 416 663 6963
Fax: 1 416 663 9065
www.newcon-optik.com
E-mail: newconsales@newcon-optik.com

Export Information. Night Vision and Thermal Imaging Equipment in general is subject
to export control. Please consult your Local and Federal Government Authorities prior to
purchase or further shipment of the Controlled Goods. Newcon Optik relieves itself from
any liabilities, claims or accusations if

ページ2に含まれる内容の要旨

2 7 Manufacturer’s Warranty Newcon Optik warrants it’s Optical Products against genuine Dear Customer. manufacturer’s defects in materials and workmanship for a period of This Manual is a basic instruction on operating one full year from the original date of purchase. All optical electronic parts, the Thermal Imaging Device TVS 7B. We assume that components which used in covered products, such as image intensifier tubes, an operator has a knowledge in principle on use of focal plain

ページ3に含まれる内容の要旨

6 3 Head Gear Introduction ROTATION ENABLING BUTTON BUTTON Thermal Imaging Binoculars TVS 7B enable the profes- sional users to visualize a heat irradiated by live bodies, RING targets and other objects. Device detects extremely low difference in temperature, thus distinguishing the object MOUNTING image from its background. ADAPTER SLEDGE Unlike the conventional night vision equipment, which requires minimum light or supporting illumination and might not always be effective in

ページ4に含まれる内容の要旨

4 5 Description How To Do It This is the short description how to operate TVS 7B. 2 9 9 4 Read carefully to make sure you fully understand how to power up your Thermal Imager properly. 1 3 TVS 7B needs minimum 2.4 V and Maximum 3.3 V, therefore Use only Lithium type 2 pcs. AA batteries (1.5V each) or at least 2500 mAh Rechargeable batteries AA size (1.2V each). 8 To begin with, install batteries into battery compartment 5 6 7 (8) complying with polarity guidance (-)inside,