ADTRAN NetVanta T1/FT1の取扱説明書

ページ1に含まれる内容の要旨

For more detailed documentation, visit us online at www.adtran.com.
®
NetVanta T1/FT1 Network Interface Module (NIM) P/N 1202862L1
Quick Start Guide
INSTALLATION INSTRUCTIONS
WAN-T1 DBU
1. Remove the power from the unit.
2. Slide the option module into the option slot until the module is
firmly seated against the chassis.
3. Secure the pins at both edges of the module.
SPECIFICATIONS
4. Connect the cables to the associated device(s).
Operating Modes Frame Relay, Multilink Frame Relay,
5. Compl

ページ2に含まれる内容の要旨

For more detailed documentation, visit us online at www.adtran.com. ® NetVanta T1/FT1 Network Interface Module (NIM) P/N 1202862L1 Quick Start Guide T1/FT1 NIM COMMANDS clock source [internal | line*] remote-alarm [rai] Configures the source timing used for the interface. Use the no form of this command to return Selects the alarm signaling type to be sent when a loss of frame is detected on the T1 receive to the default value. signal. Use the no form of this command to disable all transmitted