Agilent Technologies N6315Aの取扱説明書

ページ1に含まれる内容の要旨

User’s Guide
Agilent Technologies
N6314A and N6315A
Type-N 50 Ohm RF Cables
Manufacturing Part Number: 5964-7333
Printed in USA
Print Date: February 2008
Supersedes: July 2005
© Copyright © Agilent Technologies, Inc. 2003, 2005, 2008

ページ2に含まれる内容の要旨

Documentation Warranty THE MATERIAL CONTAINED IN THIS DOCUMENT IS PROVIDED “AS IS,” AND IS SUBJECT TO BEING CHANGED, WITHOUT NOTICE, IN FUTURE EDITIONS. FURTHER, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, AGILENT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED WITH REGARD TO THIS MANUAL AND ANY INFORMATION CONTAINED HEREIN, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. AGILENT SHALL NOT BE LIABLE FOR ERRORS OR FOR

ページ3に含まれる内容の要旨

Printing Copies of Documentation from the Web To print copies of documentation from the Web, download the PDF file from the Agilent web site: �Go to http://www.agilent.com. � Enter the product model number in the Search function and click Search. �Click on the Manuals hyperlink. � Open the PDF of your choice and print the document. Contacting Agilent Assistance with test and measurements needs and information on finding a local Agilent office are available on the Web at: www.agilent.com/find/

ページ4に含まれる内容の要旨

Model Number N6314A Connector Type Type-N 50Ω cable / male to male Part Number 8120-8862 Impedance 50Ω (nominal) Return Loss ≥ 24 dB (DC to 3 GHz) ≥ 18 dB (3 GHz to 12.4 GHz) Length 61 cm (24 inches) Net Weight 0.14 kg (0.31 lbs) Shipping Weight 0.59 kg (1.30 lbs) User’s Guide 5964-7333 4

ページ5に含まれる内容の要旨

Model Number N6315A Connector Type Type-N 50Ω cable / male to female Part Number 8121-0027 Impedance 50Ω (nominal) Return Loss ≥ 24 dB (DC to 3 GHz) ≥ 18 dB (3 GHz to 12.4 GHz) Length 61.0 cm (24 inches) Net Weight 0.12 kg (0.26 lbs) Shipping Weight 0.57 kg (1.26 lbs) 5 User’s Guide 5964-7333

ページ6に含まれる内容の要旨

Care and Maintenance To obtain optimum performance from RF cables, observe these precautions: � Flex and straighten the cables as little and seldom as possible. � Make connections carefully to avoid misalignment, connector damage, or inaccurate measurements. � Keep the connectors free of dirt and metallic particles by periodic inspection and cleaning. CAUTION Cotton swabs may leave fibers on the connector that can cause inaccurate measurement results. � When you clean the connectors, apply cle

ページ7に含まれる内容の要旨

Inspect the Mating Plane Surfaces Flat contact between the connectors at all points on their mating plane surfaces is required for a good connection. Look especially for deep scratches or dents, and for dirt and metal particles on the connector mating plane surfaces. Also look for signs of damage due to excessive or uneven wear or misalignment. Light burnishing of the mating plane surfaces is normal, and is evident as light scratches or shallow circular marks distributed more or less uniform