ADTRAN HRE/T200の取扱説明書

ページ1に含まれる内容の要旨

JOBAID
61246041L1-22A
HRE T200
0002
STATUS LEDs
WIRING DIAGRAM FOR HDSL TECHNOLOGY
HRE / T200
PWR   OFF No span power is present
CP1 Circuit Pack Cable / Color For HDSL / HRE
CLEI: T1R6DTTD_ _
 GREEN Span power is present
/Pin # Wire Housing T400 / T200
NET LP1/NET LP2   OFF No sync with the HTU-C on NET LP1/LP2
5-15 Blue White Customer, Loop 1
 GREEN Sync with good signal quality
7-13 Orange Red Network, Loop 1
 YELLOW Sync with marginal signal quality
41-47 Orange White Network, Loo

ページ2に含まれる内容の要旨

PRICING AND AVAILABILITY 800.827.0807 TECHNICAL SUPPORT 800.923.8726 RETURN FOR REPAIR 256.963.8722 T200 HRE TURN-UP GUIDE www.adtran.com 61246041L1-22A INSERTING THE TAC For test access using the TAC, insert the TAC into the repeater housing as follows. LOOP 1 LOOP BACK Hold card with the index finger through the finger hole viewing the edge of the card P7 P5 so that SW1 is facing to the right. The edge of the card being viewed corresponds to T T the faceplate of the HRE. Insert card into