ページ1に含まれる内容の要旨
Installation Guide for
Link Aggregator Tap
10/100 In-Line to GigaBit
with SFP Monitor Ports
Doc. PUBLAIF4CU4SFPU Rev. 1, 10/08
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
10/100 In-Line Link Aggregator Tap Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Application Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Cabling Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 . . . . . . .
ページ4に含まれる内容の要旨
10/100 In-Line Link Aggregator Tap PLEASE READ THESE LEGAL NOTICES CAREFULLY. By using a Net Optics Tap you agree to the terms and conditions of usage set forth by Net Optics, Inc . No licenses, express or implied, are granted with respect to any of the technology described in this manual . Net Optics retains all intellectual property rights associated with the technology described in this manual . This manual is intended to assist with installing Net Optics products into your network . Tradem
ページ5に含まれる内容の要旨
10/100 In-Line Link Aggregator Tap Introduction Thank you for choosing the most versatile monitoring Tap available today . Net Optics Link Aggregator Taps are an efficiency breakthrough for passively monitoring multiple full-duplex links . Whether you are a novice or an expert, this installation guide is designed to help answer any questions and to provide a quick set-up reference . Net Optics Link Aggregator Tap provides superior monitoring coverage while leveraging monitoring resources. P
ページ6に含まれる内容の要旨
10/100 In-Line Link Aggregator Tap Key Features Passive, Secure Technology • Supports full-duplex monitoring of four links with a single NIC, increasing monitoring efficiency • Optional Regeneration Tap technology enables up to four devices to simul- taneously monitor all aggregated traffic • Unique Zero Delay™ technology ensures no packet delay or loss if power is lost to the Tap • Provides complete full-duplex visibility at 10 or 100 Mbps without data stream interference or introducing a p
ページ7に含まれる内容の要旨
10/100 In-Line Link Aggregator Tap Link Aggregator Tap Implementation Application Diagram 10/100 In-Line Link Aggregator Tap GigaBit SX GigaBit SX Monitoring Monitoring Device 1 Device 2 Finance Switch Switch HR Switch Switch Figure 1: Application Diagram TM Zero Delay - A Net Optics Breakthrough Highly sensitive network locations can improve monitoring performance via the innovative features of Net Optics Taps . If power is lost to other 10/100 Taps, the connected devices may introduce
ページ8に含まれる内容の要旨
10/100 In-Line Link Aggregator Tap Unpacking and Inspection Carefully unpack the 10/100 In-Line Link Aggregator Tap and check for dam- aged or missing parts . The Link Aggregator Tap ships with the following: • 10/100 In-Line Link Aggregator Tap • Two power cords • Installation Guide In addition to the Port Aggregator, you should have ordered at least one SFP module . You may have also ordered an extended warranty . Carefully check the packing slip against parts received . If any part is miss
ページ9に含まれる内容の要旨
10/100 In-Line Link Aggregator Tap LED Indicators • PWR 1/ PWR 2: Main and Redundant Power . If the Tap is deployed with both power supplies, both LEDs illuminate when the Tap is plugged in . If an LED is off, this indicates that the corresponding power supply is not connected or not functioning . • Activity Indicator: When there is activity on the link, LED flashes green. • Link Indicator: When a good link is established, the LED is a solid green . Connecting to the Network To connect
ページ10に含まれる内容の要旨
10/100 In-Line Link Aggregator Tap NOTE: _____________________________________________________________ At 10Mbps, if any of the network links are unplugged during operation, it will be necessary to restart traffic from the connected network devices upon re-connecting to the Link Aggregator. This is to ensure that traffic is properly copied to the monitor ports and only applies to networks running at 10Mbps. ____________________________________________________________________ Connecting Monit
ページ11に含まれる内容の要旨
10/100 In-Line Link Aggregator Tap Note: ______________________________________________________________ The 10/100 Link Aggregator is shipped with the following default dip-switch settings. It is strongly recommended that you do not make any changes to these settings, except when needed, and only to switches 2,4,5 and 6. If Switch 3, for example, is toggled to "on," the Link Aggregator will not get a valid link. In the event that the aforementioned occurs, it will be necessary to return the
ページ12に含まれる内容の要旨
10/100 In-Line Link Aggregator Tap Specifica tions Environment Operating Temperature: 0˚C to 55˚C Storage Temperature: -10˚C to 70˚C Relative Humidity: 10% min, 95% max, non-condensing Power Power Supply Input: 100-240VAC, 0 .5A, 47-63Hz DC Power Input: -48 VDC typical, -36 VDC min, -75 VDC max Mechanical Dimensions: 1 .75” high x 17 .125” deep x 17” wide Certifications Fully RoHS compliant Copper Interface Cable Type: 22-24 AWG unshielded twisted pair cable, CAT5/CAT5e Link Distance Supporte
ページ13に含まれる内容の要旨
10/100 In-Line Link Aggregator Tap Limitations on Warranty and Liability Net Optics offers a limited warranty for all its products . IN NO EVENT SHALL NET OPTICS, INC . BE LIABLE FOR ANY DAMAGES INCURRED BY THE USE OF THE PRODUCTS (INCLUD- ING BOTH HARDWARE AND SOFTWARE) DESCRIBED IN THIS MANUAL, OR BY ANY DEFECT OR INACCURACY IN THIS MANUAL ITSELF . THIS INCLUDES BUT IS NOT LIM- ITED TO LOST PROFITS, LOST SAVINGS, AND ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY
ページ14に含まれる内容の要旨
10/100 In-Line Link Aggregator Tap Notes: 10
ページ15に含まれる内容の要旨
ページ16に含まれる内容の要旨
www.netoptics.com © 2008 by Net Optics, Inc . All Rights Reserved .
