ページ1に含まれる内容の要旨
802.11g
Wireless LAN Card
User’s Manual
Doc. No.:120903-01
ページ2に含まれる内容の要旨
REGULATORY STATEMENTS FCC Certification The United States Federal Communication Commission (FCC) and the Canadian Department of Communications have established certain rules governing the use of electronic equipment. Part15, Class B This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interface, and 2) This device must accept any interface received, including interface that may cause undesired operati
ページ3に含まれる内容の要旨
Table of Contents INTRODUCTION...................................................................................... 1 WIRELESS NETWORK OPTIONS ................................................................. 1 The Peer-to-Peer Network............................................................ 1 The Access Point Network........................................................... 2 LED INDICATORS FOR WIRELESS CARDBUS CARD.................................. 3 Power Indicator: (Orange LED).
ページ4に含まれる内容の要旨
ACCESSING THE CONFIGURATION UTILITY............................................. 18 MAIN TAB............................................................................................... 19 ADVANCED TAB ..................................................................................... 24 PRIVACY TAB ......................................................................................... 24 STATISTICS TAB..................................................................................
ページ5に含まれる内容の要旨
INTRODUCTION The 802.11g Wireless LAN Card is a device that allows you connect your computer to a wireless local area network (LAN). A wireless LAN allows your system to use wireless Radio Frequency (RF) technology to transmit and receive data without having to physically attach to the network. The Wireless protocols that come with this product ensure data security and isolation from interference generated by other radio frequencies. This card also allows you to take full advantage of
ページ6に含まれる内容の要旨
You can also use one computer as an Internet Server to connect to a wired global network and share files and information with other computers via a wireless LAN. The Access Point Network The network installation allows you to share files, printers, and Internet access much more conveniently. With Wireless LAN Cards, you can connect wireless LAN to a wired global network via an Access Point. - 2 -
ページ7に含まれる内容の要旨
LED Indicators For Wireless CardBus Card Power Indicator: (Orange LED) This LED will illuminate when the driver is well-installed. Act Indicator: (Green LED) This LED flickers when transmitting/receiving wireless data. - 3 -
ページ8に含まれる内容の要旨
INSTALLATION Caution: Do not insert the Wireless LAN Card into your computer until the procedures in “Install the Driver & Utility” has been performed. Install the Driver & Utility 3. Exit all Windows programs. Insert the CD-ROM into the CD-ROM drive of your computer. If the CD-ROM is not launched automatically, go to your CD-ROM drive (e.g. drive D) and double-click on Setup.exe. 4. The main screen of the CD-ROM opens. Click Driver & Utility Installation to start the installation.
ページ9に含まれる内容の要旨
5. When the Welcome screen appears, click Next to continue. 6. The Choose Destination Location screen will show you the default destination chosen by the utility. Click Next to continue. - 5 -
ページ10に含まれる内容の要旨
7. Follow the instruction to select the program folder. Click Next to continue. 8. Click Finish to complete the installation - 6 -
ページ11に含まれる内容の要旨
1 Install the device Note: Make sure the procedures in “Install the Driver & Utility” has been performed. 1. If you are using the Wireless PCI Card, before installing the device, make sure the computer is turned off. Remove the expansion slot cover from the computer. For Wireless CardBus users, please locate your CardBus slot. 2. Carefully slide the Wireless PCI/CardBus Card into the PCI/CardBus slot. Push evenly and slowly and ensure it is properly seated. For Wireless PCI Card, you
ページ12に含まれる内容の要旨
Note for Windows 2000 users: During the installation, when the “Digital Signature Not Found” screen appears, click “Yes” to continue. Note for Windows XP users: 1. Select Install the software automatically (Recommended) and click Next. - 8 -
ページ13に含まれる内容の要旨
3. Click Continue Anyway. 4. Click Finish to complete the installation. Verify Device Installation To verify that the device has been properly installed in your computer and is enabled, go to Start ! Settings ! Control Panel ! System (! Hardware) ! Device Manager. Expand the Network adapters item. If - 9 -
ページ14に含まれる内容の要旨
the 802.11g Wireless PCI/CardBus PC Card is listed, it means that your device is properly installed and enabled. - 10 -
ページ15に含まれる内容の要旨
NETWORK CONNECTION Once the driver has been installed, you will need to make adjustments to your network settings. In Windows 98/ME 1. Go to Start ! Settings ! Control Panel ! Network. 2. Make sure that you have all the following components installed. " 802.11g Wireless PCI / CardBus PC Card " IPX/SPX-compatible Protocol " NetBEUI " TCP/IP - 11 -
ページ16に含まれる内容の要旨
If any components are missing, click on the Add button to install them. All of the protocols and clients required (listed above) are provided by Microsoft. 3. Next, highlight the specific network component you need, click Add. 4. Highlight Microsoft, and then double click on the item you want to add. Click OK. After returning to the Network screen, you can make your computer is visible on the network by enabling the File and Print Sharing. 5. Click the Identification tab. Enter a
ページ17に含まれる内容の要旨
6. Click the Access Control tab. Make sure that “Share-level access control” is selected. If connecting to a Netware server, share level can be set to “User-level access control.” - 13 -
ページ18に含まれる内容の要旨
7. When finished, restart your computer to activate the new device. 8. Once the computer has been rebooted, a Logon window will appear and will require you to enter a username and password. Enter a username and password and click OK. Do not click the Cancel button, or you won’t be able to log onto the network. 9. Double-click the Network Neighborhood icon on the windows desktop, and you should see the names of the other PCs on the network. In Windows 2000/XP 1. (In Windows 2000) G
ページ19に含まれる内容の要旨
2. Make sure that you have all the following components installed. " Client for Microsoft Networks " NWLink NetBIOS " NWLink IPX/SPX/NetBIOS Compatible Transport Protocol " Internet Protocol (TCP/IP) If any components are missing, click on the Install… button to select the Client/Service/Protocol required. 3. After selecting the component you need, click Add… to install. - 15 -
ページ20に含まれる内容の要旨
4. Select the network protocol you wish to add and click OK. This will return you to the Local Area Connections Properties window. 5. To allow your computer to be visible on the network, make sure you have checked off the File and Printer Sharing for Microsoft Networks. 6. When finished, you must restart your computer to complete the installation. - 16 -
