ページ1に含まれる内容の要旨
1-Bay SATA NAS Server
NAS-7100
Quick Installation Guide
Version:1.0
ページ2に含まれる内容の要旨
Table of Contents System............................................................................................................ 4 . . Package.Contents................................................................................... 4 . . System.Requirements............................................................................. 4 . . Front.Panel............................................................................................ 4 . . Rear.Panel................................
ページ3に含まれる内容の要旨
Thank. you. for. purchasing. PLANET. 1-Bay. SATA. NAS. Server,. NAS-7100.. In. this. installation.guide,.it.illustrates.the.simply.installation.for.user.to.install.a.HDD.and. install. NAS-7100. to. Windows. system.. For. more. information,. please. also. refer. to. the.User’s.manual.in.our.CD-ROM.
ページ4に含まれる内容の要旨
System Package Contents The.following.items.should.be.included.in.the.NAS65.packaging. If. any. of. these. items. are. damaged. or. missing,. please. contact. your. dealer. for. replacements. •. NAS-7100 •. Quick.Installation.Guide •. Setup.CD •. Ethernet.Cable. •. Power.Adapter.with.Power.Core System Requirements •. Windows.95,.98,.ME,.NT.4.0,.2000/2003,.XP.or.Vista. •. Ethernet.Network.employing.10BaseT,.100BaseTX.or.1000BaseT. •. TCP/IP.protocol. Front Panel Rear Panel
ページ5に含まれる内容の要旨
HDD Install/Remove The.NAS-7100.supports.one.3.5-inch.Serial-ATA.(SATA).hard.drive..NAS-7100.does. not support low profile or half high hard drive. HDD Install 1..Make.sure.the.NAS-7100.is.powered.off 2..Open.top.cover.of.NAS-7100 3..Make.sure.your.hard.drive.is.SATA.interface.and.make.sure.you.back.up.all.pre- existing.data.before.use.it.on.NAS-7100 4..Pull.up.the.HDD.tray.then.slide.and.push.the.HDD.into.the.tray,.make.sure.con- nector.well.connecting 5..Push.down.the.HDD.tray 6. Put the top c
ページ6に含まれる内容の要旨
System Installation Boot up 1..Connect. the. network. cable. to. LAN. port. on. the. rear. of. NAS-7100.. Connect. the. others.end.to.your.hub.or.switch. 2..Connect.the.supplied.power.adapter.to.a.power.outlet.and.plug.the.power.cord. into.NAS-7100’s.power.input.on.the.rear.panel. 3..Power.on. . Locate.the.NAS-7100’s.power.switch.on.the.NAS-7100.real.panel..Press.it.once. to.power.on.the.NAS 4..The.NAS-7100.self-test. . The. NAS-7100. will. run. a. brief. self-test.. During. the. self-test,. all
ページ7に含まれる内容の要旨
Configuration •. This.procedure.only.needs.to.be.done.ONCE,.by.the.NAS-7100’s.Administrator. •. Other.LAN.users.should.follow.the.advice.given.in.using.your.NAS.described.in. the.following.section. Quick Setup with the NAS Wizard 1..Please.insert.User’s.Manual.and.Utility.CD.into.the.CD-ROM.drive.to.initiate.the. autorun.program..Once.completed.a.menu.screen.will.appear. 2..Click.on.“Initial.Utility”.hyper.link.to.initiate.the.installation..If.the.autorun.pro- gram. is. not. process. in. your. P
ページ8に含まれる内容の要旨
A.list.of.all.the.NAS-7100s.on.your.network.will.show.on.the.left.side..The.right. side.displays.details.of.the.currently.selected.NAS-7100.. If.the.desired.NAS-7100.is.not.listed,.check.the.following: • The NAS-7100 has finished the start up and boot process. •. Your.PC.and.the.NAS-7100.are.on.the.same.IP.segment. •. Click.“Refresh”.button.to.search.again. Otherwise,.select.the.desired.NAS-7100,.and.click.the."Next".button. 4..The.following.screen.will.then.be.displayed..You.can.set.the.IP.sett
ページ9に含まれる内容の要旨
5. You can configure the time settings in this screen. Please click “Next” after the configured. The.Default.Name.is.shown..You.may.change.this.if. Server Name you.wish. Normally,.this.name.should.match.the.Workgroup. Workgroup Name name.used.by.PCs.on.your.LAN. Time Zone Select.your.time.zone.from.the.list. Enter.the.local.date.(mm/dd/yyyy.format).and.time. Local Date/Time 6. Please check the configured settings of this screen, if all the configure are cor- rect..Please.click.“Save”.button..
ページ10に含まれる内容の要旨
7..After.click."Save",.you.will.see.the.dialog.box.to.prompt.you.again..Please.click. “OK”.to.save.or.click.“Cancel.to.check.the.settings.. 8..If.you.would.like.to.install.“Flash-Map”.to.helps.you.to.mapping.NAS-7100.now,. please. click. “Yes”. and. refer. to. the. manual. in. our. bundled. CD. disk,. otherwise,. please click “No” to finish the configuration, then close the initial utility. 10
ページ11に含まれる内容の要旨
Using Your NAS-7100 To Use the NAS storage 1..Open.Network.Neighborhood.(or.My.Network.Places). 2..Locate.the.NAS-7100..If.it.is.not.listed,.double-click.Entire.Network..Then.dou- ble-click.the.Workgroup.that.the.NAS-7100.is.in..(By.default,.the.NAS-7100.is.in. Workgroup.) 3..Double. click. on. the. NAS-7100. icon.. You. will. then. see. a. list. of. shares. (shared. folders). You can read and write files to these shares, unless the NAS-7100 ad- ministrator.has.blocked.access. 4..To.create.a.sho
ページ12に含まれる内容の要旨
Other Configuration If. you. want. to. set. more. detail. settings. of. NAS-7100,. please. refer. to. our. manual. and configure with your Web Browser. If you have any difficulty on resolving the problem.while.installing.or.using.NAS-7100,.please.feel.free.to.contact.PLANET.for. support. 12
