ページ1に含まれる内容の要旨
Operating Instructions
HOB
Contents
GB
Installation, 2-5
Positioning
GB
Gas connection
Data plate
English,1
Burner and nozzle specifications
Electrical connection, 6
Description of the appliance, 7
Overall view
Start-up and use, 8
Practical advice on using the burners
Precautions and tips, 9
General safety
Disposal
GP641X
Recycling & Disposal Information
Maintenance and care, 10
Switching the appliance off
Cleaning the appliance
Gas tap maintenance
Troubleshooting, 11
After Sales Service, 12
Gua
ページ2に含まれる内容の要旨
Installation ! Before operating your new appliance please read this also be equipped with vents to allow gas to escape in the GB instruction booklet carefully. It contains important information event of a leak. As a result LPG cylinders, whether for safe use, installation and care of the appliance. partially or completely full, must not be installed or stored in rooms or storage areas that are below ground level ! Please keep these operating instructions for future (cellars, etc.). It is advisab
ページ3に含まれる内容の要旨
45 mm. Front ! Check that the pressure of the gas supply is consistent GB with the values indicated in Table 1 (“Burner and nozzle specifications”). This will ensure the safe operation and longevity of your appliance while maintaining efficient energy consumption. Connection with a rigid pipe (copper or steel) ! Connection to the gas system must be carried out in such a way as not to place any strain of any kind on the appliance. Hooking position Back There is an adjustable L L L-shaped pipe fit
ページ4に含まれる内容の要旨
• Setting the burners to minimum: GB 1. Turn the tap to the low flame position. 2. Remove the knob and adjust the adjustment screw, which is positioned in or next to the tap pin, until the flame is small but steady. 3. Having adjusted the flame to the required low setting, while the burner is alight, quickly change the position of the knob from minimum to maximum and vice versa several times, checking that the flame does not go out. 4. Some appliances have a safety device (thermocouple) fitted.
ページ5に含まれる内容の要旨
Burner and nozzle specifications GB Table 1 Liquid Gas Naturale Gas Burner Diameter Thermal Power By-pass Nozzle Flow* Nozzle Flow* (mm) kW (p.c.s.*) 1/100 1/100 g/h 1/100 l/h (mm) Nom. Red. (mm) *** ** (mm) Fast 100 3.00 0.70 39 86 218 214 116 286 (Large) (R) Semi Fast 75 1.65 0.40 28 64 120 118 96 157 (Medium) (S) Auxiliary 55 1.00 0.40 28 50 73 71 71 95 (Small) (A) Nomin
ページ6に含まれる内容の要旨
Electrical Connection Power supply voltage and frequency: 220-240V a.c. Disposing of the plug GB 50/60Hz. Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be ! The supply cable must be positioned so that it accidentally inserted into a socket. Instructions for never reaches at any point a temperature 50°C connecting cable to an alternative plug: higher than the room temperature. The cable must be routed away from the rear vents. Should you ! The wires
ページ7に含まれる内容の要旨
Description of the appliance Overall view GB GAS BURNERS Support Grid for COOKWARE Control Knobs for GAS BURNERS SAFETY DEVICES * Ignition for GAS BURNERS * • GAS BURNER ignition* enables a specific burner • GAS BURNERS differ in size and power. Use the to be lit automatically. diameter of the cookware to choose the most appropriate burner to cook with. • SAFETY DEVICE* stops the gas flow if the flame is accidentally extinguished. • Control Knobs for GAS BURNERS adjust the power or the size of
ページ8に含まれる内容の要旨
Start-up and use ! The position of the corresponding gas burner or Practical advice on using the burners GB electric hotplate* is shown on every knob. To ensure the burners operate efficiently: Gas burners Each burner can be adjusted to one of the following • Use appropriate cookware for each burner (see settings using the corresponding control knob: table) so that the flames do not extend beyond the bottom of the cookware. • Off • Always use cookware with a flat base and a cover. Maximum • When
ページ9に含まれる内容の要旨
Precautions and tips ! This appliance has been designed and • Do not let children play with the appliance. GB manufactured in compliance with international safety • The appliance should not be operated by people standards. The following warnings are provided for (including children) with reduced physical, safety reasons and must be read carefully. sensory or mental capacities, by inexperienced individuals or by anyone who is not familiar with General safety the product. These individuals should,
ページ10に含まれる内容の要旨
Maintenance and care Gas tap maintenance Switching the appliance off GB Over time, the taps may become jammed or difficult to Disconnect your appliance from the electricity supply turn. If this happens, the tap must be replaced. before carrying out any work on it. ! This procedure must be performed by a qualified technician authorised by the Cleaning the appliance manufacturer. ! Do not use abrasive or corrosive detergents such as stain removers, anti-rust products, powder detergents or sponges
ページ11に含まれる内容の要旨
Troubleshooting It may happen that the appliance does not function properly or at all. Before calling the service centre for GB assistance, check if anything can be done. First, check to see that there are no interruptions in the gas and electrical supplies, and, in particular, that the gas valves for the mains are open. Problem Possible causes/Solution The burner does not light or the flame is not • The gas holes on the burner are clogged. even around the burner. • All the movable parts that ma
ページ12に含まれる内容の要旨
Guarantee 12 months Parts and Labour Guarantee Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you. This guarantee is subject to the following conditions: - The appliance h
ページ13に含まれる内容の要旨
After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us – the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in the country offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensure you receive fast, reliable, local service. UK: 08448 224 224 Republic of Ireland: 0818 313 413 www.hotpointservice.co.uk Please note: Our advisors will r
ページ14に含まれる内容の要旨
Notes GB PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24 14
ページ15に含まれる内容の要旨
Notes GB PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24 15
ページ16に含まれる内容の要旨
Notes 10/2011 - 195097590.00 XEROX FABRIANO GB PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24 16
