ページ1に含まれる内容の要旨
CMS501
Product Description Features
• 130mm (5.00") ICTTM transducer for greater durability
The Tannoy CMS501 is a full bandwidth; high power and high sensitivity ceiling monitor
system. The design comprises a 130mm (5.00") transducer mounted in a vented, injection
and longevity
moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material.
• High power and high sensitivity with extended
The point source configuration of the Tannoy ICTTM driver •s mid-bass and tweet
ページ2に含まれる内容の要旨
CMS501 TECHNICAL SPECIFICATIONS System CMS501 Transducers (1) Low Frequency 130mm (5.00") mineral loaded Frequency Response (-3dB) 85Hz - 22kHz polypropylene ICT™ BM Back can (1) Frequency Range (-10dB) 74Hz - 24kHz High Frequency ICT™ aluminium dome BM Back can Physical (1) Frequency Range (-10dB) 74Hz - 24kHz PI Back can Enclosure Back can Zinc plated steel (2) System Sensitivity (1W @1m) 89dB (1W = 2.45V for 6 Ohms) Baffle Reflex loaded UL 94V-0 rated ABS Grille Steel, with weather resistant
ページ3に含まれる内容の要旨
CMS501 PERFORMANCE MEASUREMENTS 1m on-axis frequency response 110 100 90 80 70 60 ANECHOIC 50 FREQUENCY 10 100 1000 10000 100000 frequency (Hz) RESPONSE Impedance vs frequency 25 20 15 10 5 0 1 10 100 frequency (Hz) 1000 10000 100000 IMPEDANCE 110 100 90 80 0 deg 70 10 deg 20deg 60 30deg 40deg 50 10 100 1000 10000 100000 frequency (Hz) OFF AXIS RESPONSE Horizontal off-axis response 360 330 300 Beamwidth (1/3 Octave) 270 240 210 180 150 120 90 60 30 0 100 1000 10000 frequency (Hz) BEAMWIDTH Horiz
ページ4に含まれる内容の要旨
CMS501 PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE) 100 Hz 250 Hz 125 Hz 315 Hz 0 0 160 Hz 400 Hz 200 Hz 500 Hz 330 0 30 330 30 0 -12 -12 300 60 300 60 -24 -24 -36 -36 270 90 270 90 -48 -48 6 63 30 0 H Hz z 1 1..6 6 k kH Hz z 8 80 00 0 H Hz z 2 2 k kH Hz z 0 0 1 1 k kH Hz z 2 2..5 5 k kH Hz z 1 1..2 25 5 k kH Hz z 3 3..1 15 5 k kH Hz z 330 0 30 330 0 30 -12 -12 300 60 300 60 -24 -24 -36 -36 270 90 270 90 -48 -48 - - 4 kHz 10 kHz 5 kHz 12.5 kHz 0 0 6.3 kHz 16 kHz 8 kHz 20 kHz 330 30 330 0 30
ページ5に含まれる内容の要旨
CMS501 DIMENSIONAL SKETCHES 207.00 181.30 189.50 [8.10"] [7.14"] [7.50"] 5.00 [0.20"] 210.00 [8.20"] CMS501 BM TEMPLATE HOLE CUTOUT SIZE - 190mm (7.50") 181.30 [7.14"] 136.00 [5.40"] 5.00 [0.20"] 210.00 [8.20"] CMS501 PI TEMPLATE HOLE CUTOUT SIZE - 190mm (7.50") Ordering Information PART NUMBER MODEL NAME BAFFLE / GRILLE COLOUR PACKED QUANTITY 8001 4450 CMS501 BM White / paintable 2 8001 4460 CMS501 PI White / paintable 2 8001 4180 CMS501 Plaster (Mud) Ring Zinc plated steel 10 8001 3830 CMS501
ページ6に含まれる内容の要旨
CMS501 DIMENSIONAL SKETCHES The PI back can accepts direct connection to installed conduit in two ways using squeeze connectors: 153.5 1 22mm (0.87") via the clamp location at the rear after first removing cable clamp [6.04"] 186.40 288.00 256.00 [7.34"] [11.34"] [10.08"] 136.20 2 Any of the three knock-out points at the 8.80 side 19mm / 22mm / 28mm [5.36"] [0.35"] (0.75" / 0.87" / 1.10") SIZE - 190mm (7.50") CMS501 PI BACK CAN TEMPLATE HOLE CUTOUT SUPPLIED ACCESSORIES OPTIONAL ACCESSORIES C-RI
ページ7に含まれる内容の要旨
CMS501 Architectural specifications The Ceiling Monitor System shall consist of a 130mm (5.00") full range, point source ICTTM transducer mounted in a vented, injection moulded, paintable front baffle in UL94V-0 ABS material. The back can in both PI (pre-install) & BM (Blind-mount variants) shall be constructed of zinc plated steel. A recessed termination box shall be integrated with the back can, a removable locking connector with screw terminals for secure wire termination with "loop through"
ページ8に含まれる内容の要旨
CMS501 NOTES Tannoy United Kingdom T: 00 44 (0) 1236 420199 E: enquiries@tannoy.com Tannoy North America T: 00 1 (519) 745 1158 E: inquiries@tannoyna.com Tannoy Deutschland T: 00 49 (180) 1111 881 E: anfragen@tannoy.com Tannoy France T: 00 33 (0)1 7036 7473 E: ventes@tannoy.com CMS501 data file // issue 1.06 // 10.01.08 Tannoy adopts a policy of continuous improvement and product specification is subject to change
ページ9に含まれる内容の要旨
CMS501 NOTES Tannoy United Kingdom T: 00 44 (0) 1236 420199 E: enquiries@tannoy.com Tannoy North America T: 00 1 (519) 745 1158 E: inquiries@tannoyna.com Tannoy Deutschland T: 00 49 (180) 1111 881 E: anfragen@tannoy.com Tannoy France T: 00 33 (0)1 7036 7473 E: ventes@tannoy.com CMS501 data file // issue 1.06 // 10.01.08 Tannoy adopts a policy of continuous improvement and product specification is subject to change
