ページ1に含まれる内容の要旨
C3-RS-625
PROFESSIONAL 2-WAY AM/AM REMOTE CAR STARTER
&
KEYLESS ENTRY SYSTEM
With Two-way Serial Port Data Link
Compatible
Please see page 15 of this manual for more details
OPERATION MANUAL
Please register your product at:
www.autopageusa.com
THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY
1
ページ2に含まれる内容の要旨
SYSTEM OPERATIONS: WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while the vehicle is running on remote control. 3. Alert servicing personnel that the vehicle can be started automatically. 4. Do not start the vehicle by remote while it’s in an enclosed area or garage. 5. Always apply the parking b
ページ3に含まれる内容の要旨
CHANGING THE BATTERY IN YOUR TRANSMITTERS XT-33: This transmitter uses two (2) 3-volt lithium ion batteries (#CR2016) that are sandwiched together with the (+) side facing upward. To replace the battery, you will need to use a small flat blade screwdriver. Locate the small notch on the lower right side of the transmitter case next to the key ring. Using the flat blade screwdriver, carefully pry the top case from the bottom case. It should snap apart after breaking the
ページ4に含まれる内容の要旨
SILENT LOCKING / UNLOCKING: Pressing the + buttons together on the transmitter will lock or unlock your system, No chirp sound will be heard. Lock / unlock confirmation will be seen through the vehicle’s parking lights only. ACTIVE UNLOCK: 1. Press button on the transmitter. 2. The horn will chirp twice and parking light will flash twice to indicating that the keyless system is now unlocked. The vehicle doors will unlock and dome lights will turn on for 30 seconds. PATHWAY ILL
ページ5に含まれる内容の要旨
You can now start and operate the vehicle normally. VALET MODE: The valet switch allows you to temporarily bypass all system function, eliminating the need to hand your transmitter to parking attendants or garage mechanics. When the system is in valet mode, and remote start functions are bypassed, however, the remote panic feature and remote door locks will remain operational. To use the valet mode, the system must first be deactivated either by using you remote transmitter, or by oper
ページ6に含まれる内容の要旨
turned “OFF”. TRUNK RELEASE (Additional Installation Required) Press and hold the button on transmitter for two seconds to remote control the trunk release or other electric devices. CAR LOCATOR (ONLY IF SIREN or HORN IS INSTALLED) Press the button twice when the system is armed to active car locator function. The horn will chirp 6 times. The parking light will flash 12 times, for you to easily locate your car. REMOTE START OPERATION: WARNINGS: As with any product that p
ページ7に含まれる内容の要旨
vehicle will remote start or remote shut down. (Programming Required) NOTE: The Remote Start Unit will not start the vehicle if any one of the following conditions exists: 1. The hood is opened. 2. The brake pedal is pressed. 3. The optional remote start enable toggle switch is in the OFF position. 4. The gear selector is in any gear other then “PARK” or “NEUTRAL” TO TURN OFF THE REMOTE START: When the engine is running (by remote start), if you want to stop it, 1. Press button o
ページ8に含まれる内容の要旨
A maximum of six cycles can occur. ENTER: 1. Press the button once to remote start the vehicle. As soon as the vehicle is running the parking lights will turn ‘ON’. 2. Immediately press the button then press button. The parking light will flash (3) times. The siren chirps (3) times. The vehicle is now programmed to start every (3) hours. 3. Press the brake pedal to stop the vehicle running. Exit the timer start: Timer start can be exited manually as follows: 1. Repeat the Ent
ページ9に含まれる内容の要旨
Note: If the system is interfered by stronger radio frequency around, sources of high voltage electric power or such obstacles like tall buildings and so on, the transmission range may get shorter as the system uses low output powered frequency. BATTERY REPLACEMENT: A 1.5V type AAA Alkaline battery powers the Remote Transmitter. When the power of the battery weakens a icon shall be displayed on the AAA LCD screen. When the old battery is repla
ページ10に含まれる内容の要旨
Start Mode Valet Mode Your vehicle is running All the function shall be temporarily on hold. Remote Transmission In – Range Indicator You are transmitting the You are within the remote signal to control unit control range. Low Battery Trunk Release Trunk open. Trunk symbol only. You have to replace the battery of remote control. Vibration Mode Remote Control vibrates Ignition On when the system is triggered Power Save Mode Driver paging Someone is paging yo
ページ11に含まれる内容の要旨
program the remote control transmitter to a second vehicle, follow the instructions for Transmitter programming. All programming parameters are the same except for the following: For Regular Remote Control Transmitter: 1. Prior to pushing any button on the transmitter. Press the Select II button first on the standard transmitter. 2. Once II button is pressed the LED on the transmitter will illuminate for 3.5 seconds. While the LED is illuminated, press the button for the function you w
ページ12に含まれる内容の要旨
Vibration / Melody Mode: Vibration mode is useful when you are in a noisy place and it is difficult to hear the beep sound from the remote control. In this mode the unit will vibrate if your security system is triggered. 1. Press and hold all four remote control buttons simultaneously until one long beep is heard. Programming has now been entered. 2. Within 5 seconds, press the button to select the mode of vibration or melody, the icon will displayed on the LCD screen to show
ページ13に含まれる内容の要旨
and buttons at the same time. It will clear the flash icon and melody sound on the LCD screen transceiver. Stop The Trigger Melody Sound: While triggering the alarm the LCD screen will alert the user through melody sound and flashing trigger icon. Press any button on the LCD remote transmitter to stop the melody sound. LIMITED LIFETIME WARRANTY PROVISIONS ( U.S. ,Continental U.S. and Canada Only) 1. Auto Page, Inc. WARRANTS that this new unit has been thor
ページ14に含まれる内容の要旨
occurring during the WARRANTY period. 4. Any equipment or parts which are claimed to be defective under this WARRANTY must be sent to the Auto Page Service center with “proof of purchase” at the purchaser’s expense prior to such return, a Return Authorization Number should be obtained. Auto Page will return the equipment, charges prepaid. Warranty Service can be provided through the dealer where the equipment is originally purchased. 5. Any unexpired WARRANTY shall be applicable to e
ページ15に含まれる内容の要旨
Warning: Some batteries may contain Perchlorate What is Perchlorate? Perchlorate is both a naturally occurring and manmade contaminant increasingly found in groundwater, surface water and soil. Most perchlorate manufactured in the U.S. is used as an ingredient in solid fuel for rockets and missiles. In addition, perchlorate-based chemicals are also used in the construction of highway safety flares, fireworks, pyrotechnics, explosives, common batteries, and automobile restraint
ページ16に含まれる内容の要旨
It is recommended to have a minimal digital service plan on your cell phone Your RS-625 is CI3 compatible and will open your world to the true power of two way communication. Complete tracking and full cell phone functionality can be added to your system. For more information please visit your local authorized Autopage dealer or go to www.autopageusa.com . 16
ページ17に含まれる内容の要旨
Compatible 2-Way Communication to the Power of 3 960 Knox Street Unit B, Torrance, CA 90502 Tel: (310) 323-1800 or (800) 262-2527 www.autopageusa.com 17
