ページ1に含まれる内容の要旨
C3-RS-727A LCD
PROFESSIONAL 2-WAY LCD REMOTE CAR
STARTER & ALARM SYSTEM
With
Built in Temperature sensor
And Two-way Serial Port Data Link
Compatible
Please see page 23 of this manual for more details
OPERATION MANUAL
Please register your product at:
www.autopageusa.com
THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY
1
ページ2に含まれる内容の要旨
TABLE OF CONTENTS: LCD REMOTE TRANSMITTER: A BATTERY REPLACEMENT 4 5 B THE REMOTE LCD ICONS WITH FUNCTION 7 C PROGRAMMING OF THE LCD REMOTE TRANSMITTER 1. Screen Lamp ON 7 7 2. Power Save Mode 3. Clear The Flash Icon and Melody Sound 7 7 4. Stop The Melody Sound. 5. Button Lock 8 6. Vibration / Melody Mode 8 8 7. Enable / Disable Bi Sound While Pressing Button: 8 8. Low Battery In
ページ3に含まれる内容の要旨
14 M PANIC FUNCTION N TRIGGER THE SYSTEM 15 15 Clear The Trigger Icons and Melody Sound Stop The Melody Sound Only 15 15 Noise Abatement Circuit 16 O ANTI CAR- JACKING Active Anti Car Jacking 16 16 Passive Anti Car Jacking Trigger The Anti Car Jacking Mode 16 16 Override The System To Turn Off Anti Car Jacking 16 P SYSTEM’S TRIGGER CHECK Q SYSTEM’S STATUS CHECK 16 16 R DRIVER PAGING (OPTION)
ページ4に含まれる内容の要旨
Auto Page, Inc. has over 25 years of experience in the vehicle security industry in the United States and is a wholly owned subsidiary of Iwata Electric Co., of Tokyo, Japan. Iwata has been an industry leader for over 50 years, establishing a reputation for ingenuity in its engineering capability and innovative communication products. Auto Page and Iwata maintain a long tradition of providing the best value
ページ5に含まれる内容の要旨
WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while running on remote control. 3. Alert servicing personnel that the vehicle can be started automatically. 4. Do not start the vehicle by remote while it’s in an en
ページ6に含まれる内容の要旨
A. BATTERY REPLACEMENT: A 1.5V type AAA Alkaline battery powers the Remote Transmitter. When the power of the battery weakens a icon shall be displayed on the LCD screen. When the old battery is replaced to new one, there will be beep sounds indicate the power is up and the clock on the LCD screen returns to AM12:00 after displaying all the icons. Correct the time by pressing for 3 seconds before usi
ページ7に含まれる内容の要旨
Vibration Mode Button Lock Remote Control vibrates Disable the transmission when the system is function temporarily triggered Driver paging Low Battery Someone is paging you in You have to replace the front of your vehicle battery of remote control. C. PROGRAMMING OF THE LCD REMOTE TRANSMITTER: Transmitter Button Description Operation LCD screen lamp turns on for 5 Press and
ページ8に含まれる内容の要旨
exit the “Power Save Mode”. 3. Clear the Flash Icon and Melody Sound: Pressing the button 3 times within 3 seconds will clear the flash icon and the melody sound on the LCD screen transmitter. 4. Stop The Trigger Melody Sound: While triggering the alarm the LCD screen will alert the user through a melody sound and a flashing trigger icon. Press any button on the LCD remote transmitter to stop melody sound on
ページ9に含まれる内容の要旨
2. Press the ( ) button again showing next order time on the screen (ie.0: 20), press them again (ie.0: 30)…and so on. 3. After the timer is set the count down begins when the icon flashes Note: 1.The count down period is fixed as 10 minutes, 20 minutes, 30 minutes, 1 hour, 1.5 hours and 2 hours maximum. a. When the count down timer shows 0:00 it means to turn off the timer. b. Press button for
ページ10に含まれる内容の要旨
Count down Timer Setting ON / Press button once for OFF and for OFF ON Daily Timer Start Timer Setting Press & hold the button for 2 seconds. 4 for – and for + Flash / icon and “Hours” for adjusting EXIT: Press and hold the button for 2 seconds or leave it for 10 seconds, the system will exit the programming mode. 1. Clock Setting: Example to AM10:30 1. Press & hold the button for 3 secon
ページ11に含まれる内容の要旨
timer program mode. Note: Maximum is 19 hours. 4. Time Set-Up For “Daily Timer Start”: Example to AM 6:30 1. Press & hold the button for 3 seconds, two-melodies will sound and the “Hours” digit will flash for adjustment. 2. Press & hold the button for 2 seconds, the LCD screen will flash the / icons and “Hours” digit for Hour set-up. 3. Press or button to decrease or increase the hour digit until
ページ12に含まれる内容の要旨
Optional Driving Pager Press within 3 seconds - ( ) Monitor Indoor Temperature Press within 3 seconds - ( ) Daily Timer Start Press within 3 seconds - ( ) LCD screen lamp turns on for Press and hold for 1 second 5 seconds. Clear the Flash Icon and Melody Sound on the LCD Press within 3 seconds - - Screen Transmitter Switching code for 2nd / 1st Press within 3 seconds and Hold - + Car
ページ13に含まれる内容の要旨
1. Press button on the transmitter. 2. The siren will chirp once and parking light will flash once indicating that the system is now armed. The vehicle’s doors will lock upon arming if interfaced with the security system. System Arm Door Ajar Trunk / Hood Ajar Clear The Flash Icon: Press the button 3 times within 3 seconds will clear the flash icon on the LCD screen transmitter. DEFEC
ページ14に含まれる内容の要旨
2. The siren will chirp twice and the parking lights will flash twice indicating that the security system is now disarmed. The vehicle’s doors will unlock and the dome light will turn on for 30 seconds upon disarming. (Note: Power door locks and dome light must be installed with the security system.) System Disarm Doors Trigger Trunk/Hood Trigger Shock Sensor Trgr Ignition Trigger Clear The Flash Ic
ページ15に含まれる内容の要旨
releasing the Valet Switch. 5. Turn the ignition switch “OFF” position. 4 Chirps from siren/horn and 3 flashes from the parking lights will indicate the system has disarmed. Note 1: You must override the alarm within 60 seconds. If not, the system will automatically re-arm. EXAMPLE: To Override The System With The Password Code 83, 1. Enter the vehicle and turn the ignition switch to the 'ON’ position. (A
ページ16に含まれる内容の要旨
1. Press and hold the button for 3 second. The alarm will immediately sound. 2. During panic mode, the normal function of this transmitter button will be disabled. The transmitter and buttons can be used to lock and unlock the door (if the option is installed), however once the button is pressed, the vehicle’s starter disable device, (where installed) will be disengaged allowing the vehicle to start.
ページ17に含まれる内容の要旨
“Noise Abatement Circuit” covers doors (Hood/Trunk) differently: If the alarm is triggered by an open door for six full cycles, the doors will be bypassed until the trigger ceases. O. ANTI CAR- JACKING Warning: If you don't need the car jacking function in this alarm system, be sure to set car jacking feature “OFF”. This system is default setting all car jacking “OFF”. ACTIVE ANTI CAR JACKING: 1. Pres
ページ18に含まれる内容の要旨
Q. SYSTEM’S STATUS CHECK When you want to check the system’s present status through the LCD screen, Press the transmitter button twice. Within 3 seconds press the (C) button. It will respond with one melody sound. Note: If it has no response then you are out of range. R. DRIVER PAGING In the event that someone wants to page the driver of the parked vehicle. In Car Driver Paging With the ignitio
ページ19に含まれる内容の要旨
U. CHANNEL 3 (TRUNK RELEASE) OUTPUT. Press and hold button on the transmitter for two seconds to remote control the trunk release or other electric devices. (If Installed as an Available Option) V. CHANNEL 4 TIMER CONTROL OUTPUT Press the transmitter (4) and (4) buttons at the same time to active Channel 4 function. Channel 4 is user-programmable timer output. You may program the built-in timer
ページ20に含まれる内容の要旨
1. Press first, within 3 seconds press and hold and buttons at the same time for 2 seconds. Two beeping sound and the “ ” icon will be displayed on the LCD screen to indicate the second transceiver pin code is programmed. 2. While the “ ” icon is displayed on the LCD screen, you can remote control and communicate with a second vehicle security system. It has two short “bi” sounds while pressing the bu
