ページ1に含まれる内容の要旨
®
AVerMedia
AVerDiGi EB1304 NET
Operation Manual
www.avermedia.com
www.averdigi.com
ページ2に含まれる内容の要旨
FCC NOTICE (Class B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communications Commission Statement NOTE- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
ページ3に含まれる内容の要旨
- WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION IF THERE IS ANY DAMAGE, SHORTAGE OR INAPPROPRIATE ITEM IN THE PACKAGE, PLEASE CONTACT WITH YOUR LOCAL DEALER. WARRANTY VOID FOR ANY UNAUTHORIZED PRODUCT MODIFICATION
ページ4に含まれる内容の要旨
Table of Contents Chapter 1 Introduction .......................................................................1 1.1 Package Content........................................................................................1 1.2 Features and Specifications .......................................................................1 1.3 Front Panel ................................................................................................2 1.4 Back Panel.......................................
ページ5に含まれる内容の要旨
8.2.1 To Setup Remote Console Setting.......................................................44 8.3 Using the Remote Playback.....................................................................45 8.3.1 Familiarizing the Local Playback Buttons ............................................46 8.3.2 Familiarizing the Download and Playback Buttons ..............................48 Appendix A Registering Domain Names ..........................................................49
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
Chapter 1 Introduction 1.1 Package Content (1) AVerDiGi EB1304 NET unit (2) Remote Control (batteries included) (3) Quick Installation Guide (4) Power Cord * The power cord varies depending on the standard power outlet of the country where it is sold. (5) Power Adapter (6) DVR accessories (including 4 screws) (7) Software CD (User Manual included) 1.2 Features and Specifications Non-PC stand-alone network digital video recorder 4 composite video inputs and 1 composite out
ページ8に含まれる内容の要旨
1.3 Front Panel (1)(2) (3) (4) Name Function : Light when the unit is power on (1) DVR Power LED : Indicate the hard disk running state. Light when the HDD is (2) HDD LED running (Read/Write) : (3) IR Sensor Receive signal from the remote control to operate the unit : (4) USB 2.0 Port Connect to pen drive / external hard disk for backup 1.4 Back Panel (3) (5) (7) (10) (1) (2) (4) (6) (8) (9) (11) (12) Name Function (1) RJ-45 port : Ethernet connection port (2) Audio In : I
ページ9に含まれる内容の要旨
1.5 Setting Up the DVR Unit 1.5.1 Installing the Hard Disk The DVR unit allows user to install one hard disk. Before installing the hard disk, make sure to set the hard disk master jumper setting. Adjust the jumper setting according to the instructions on the hard disk label. i Use 40GB/ 7200RPM IDE interface hard disk or larger is recommended Follow the illustrated instructions below to install the hard disk: 1. Loosen all screws 2. Push the cover backward and lift 3. Loosen
ページ10に含まれる内容の要旨
5. Connect the end of the IDE cable 6. Secure the hard disk inside the unit and the power connector to the hard then replace unit cover disk 7. Push the cover forward 8. Secure the cover 9. You may now connect all the cables. When the power is connected, the Power LED light turns on 4
ページ11に含まれる内容の要旨
1.5.2 Connecting Devices The back panel of the DVR unit, user can connect up to 4 video cameras, 4 sensor devices, 1 alarm device and output video to a TV or CRT/LCD monitor. Connecting the unit to a pen drive or external hard disk through USB connection for backup, then use the bundled software enables user to transfer, playback and segment the video.Follow the illustration below to make the connection: Each time user changes the video display output, the power must be UNPLUGGED and
ページ12に含まれる内容の要旨
1.5.3.1 I/O Card Sensor and Relay pinhole allocation: The signal from the sensor (i.e., infrared sensors, smoke detectors, proximity sensors, door sensors, etc.) is being transmitted to the unit and this triggers the system to respond and send signal to relay device (i.e., alarm, telephone etc). Pin # Definition 1 Sensor 1 positive pole signal 2 Sensor 1 negative pole signal 3 Sensor 2 positive pole signal 4 Sensor 2 negative pole signal 5 Sensor 3 positive pole signal 6 Sensor 3
ページ13に含まれる内容の要旨
▲ ▼ ▲ Chapter 2 Operating the EB1304 NET 2.1 Familiarizing the Remote Control Buttons Use the Remote control to operate the OSD menu on surveillance screen. (6) (1) FN EB DVR (2) 1 23 (4) 4 56 (3) 7 89 (5) 0 (7) (9) A-B (8) (10) (11) (12) (13) REC (14) (18) SELECT MENU (17) (15) LEFT UP RIGHT ▲ (16) FOCUS+ DOWN ZOOM+ ▼ FOCUS- ZOOM- PTZ SPEED- SPEED+ RM-H6 Button Function (1) FN A functional key for multiple DVR system remote control Switch to Channel 1 (2) 1 As a number key for ent
ページ14に含まれる内容の要旨
▼ ▲ Button Function Decrease the video playback at the speed of 2x, 4x 8x or 16x (11) (12) Fast play the video playback at the speed of 2x, 4x 8x or 16x (13) Stop playing / Stop recording (14) USB backup(see 2.1.2) To move the selection to the left and right (15) ▲ To go up and down and select the items in the menu list or change the settings ▼ To enter the OSD Main menu / Exit from the main menu or sub-menu (16) display Make a selection (17) Enter sub-menu REC (
ページ15に含まれる内容の要旨
▼ 2.1.2 Using USB Backup Button User can press button to backup the AB Repeat video file. 1. Set the AB Repeat file (see 2.1.1). 2. Plug in pen drive or external hard disk to DVR USB BAKCUP system. YES(SELECT) / NO(MENU) 3. During the AB Repeat playback, press button. 4. And then, press (YES) to start backup file or press (NO) to exit backup mode. The DVR system doesn’t support the power for external hard disk. i Therefore, the external hard disk need has power supply by itself.
ページ16に含まれる内容の要旨
2.3 Surveillance Screen To know if the channel is being recorded, the “ ” record symbol would appear beside the channel number. The (microphone) and (speaker) indicate that the audio is available. The information below the screen shows the current date and time, recording mode (record schedule setting), and the percentage of the used hard disk space. D1 (A) HDD 29% CIF(A) HDD 29% D1 mode Screen Preview CIF model Preview When you are in full screen preview, press
ページ17に含まれる内容の要旨
▼ TIME SEARCH TIME SEARCH (search by date and time): HARD DISK : ▲ ▼ 1. Use the and buttons and select START TIME : 2006 / 05 / 04 10 : 00 : 01 END TIME : 2006 / 05 / 05 13 : 08 : 13 SEARCH TIME. Then press or SEARCH TIME : 2006 / 05 / 04 10 : 00 : 01 again to make the selection. 2. In the SEARCH TIME, user may now select the date and time from where you want to begin the video playback. ▲ Use the and buttons to move the selection to the left and rig
ページ18に含まれる内容の要旨
Chapter 3 OSD Navigation Tree The follow figure is an OSD menu tree map. To call out the OSD menu, press on the remote control. MAIN MENU RECORD SCHEDULE RECORD SCHEDULE PASSWORD SETUP CAMERA SELECT 12 12 3 4 3 4 00 : 00 - 01 : 00 CURRENT ALWAYS REC 13 : 00 - 14 : 00 RECORD SELECT 01 : 00 - 02 : 00 ALWAYS REC ALWAYS REC NEW 12 12 3 4 3 4 14 : 00 - 15 : 00 ALWAYS REC D D1 02 : 00 - 03 : 00 ALWAYS REC CONFIRM RECORD MODE 15 : 00 - 16 : 00 ALWAYS REC 03 : 00 - 04 : 00 ALWAYS REC VI
ページ19に含まれる内容の要旨
3.1 Menu Function If the unit is currently recording the video, user may have to stop video recording to change the settings. Use remote control to navigate in the OSD menu. The red frame turns yellow when you are making a selection. OSD MENU Description MAIN MENU CAMERA SELECT : CAMERA SELECT 123 4 RECORD SELECT 123 4 Enable/disable the channel number to display the video D1 RECORD MODE on the surveillance screen VIDEO FORMAT MPEG4 RECORD FRAMERATE 60 RECORD SELECT : V
ページ20に含まれる内容の要旨
OSD MENU Description RECORD SCHEDULE RECORD SCHEDULE: 00 : 00 - 01 : 00 ALWAYS REC 01 : 00 - 02 : 00 ALWAYS REC By default, in 24 hours, the recording schedule is set to 02 : 00 - 03 : 00 ALWAYS REC always record every hour. Refer to the table below to 03 : 00 - 04 : 00 ALWAYS REC 04 : 00 - 05 : 00 ALWAYS REC customize the recoding condition 05 : 00 - 06 : 00 ALWAYS REC 06 : 00 - 07 : 00 ALWAYS REC Condition Description 07 : 00 - 08 : 00 ALWAYS REC 08 : 00 - 09 : 00 ALWAYS REC 09 :
