ページ1に含まれる内容の要旨
00_Optio43WR_PC-E.book Page 1 Thursday, February 12, 2004 10:33 AM
(PC Connection Manual)
Viewing Your Digital
Camera Images
On Your PC
ページ2に含まれる内容の要旨
00_Optio43WR_PC-E.book Page 2 Thursday, February 12, 2004 10:33 AM Introduction This booklet explains how to view the images you took with the PENTAX Optio 43WR on your PC. Keep this manual in a safe place. Regarding copyrights Images taken using the Optio 43WR that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act. Please take care, as there are even cases where limitations are placed on taking pictu
ページ3に含まれる内容の要旨
00_Optio43WR_PC-E.book Page 1 Thursday, February 12, 2004 10:33 AM Contents How to Use the Captured Images 2 Viewing Digital Camera Images on a Windows PC 4 System Requirements ............................................................... 4 Installing the Software............................................................... 6 Copying Images to your PC .................................................... 13 Disconnecting the Camera from your PC.............................. 18 Viewing Digi
ページ4に含まれる内容の要旨
00_Optio43WR_PC-E.book Page 2 Thursday, February 12, 2004 10:33 AM How to Use the Captured Images Here are some ways to use the images captured with your digital camera. Direct Print Connect your camera and printer that is compatible with "PictBridge" directly with a USB cable, and print images. • For details, see the operating manual of the printer you are using. Is your computer… • equipped with a standard USB interface? • using Windows 98/98 SE/Me/2000/XP as your OS? Or Mac OS 9.0-9.2/
ページ5に含まれる内容の要旨
00_Optio43WR_PC-E.book Page 3 Thursday, February 12, 2004 10:33 AM Use your image data Use your e-mail software to attach images to e-mails, or use them on your homepage. • See the operating manual of your email software for details on how to make attachments to e-mails. • See the operating manual of the software you are using for details on how to use images on your homepage. Use your printer ACDSee for PENTAX p.26-44 • View Images • Edit Images • Save processed images • E-mail Images
ページ6に含まれる内容の要旨
00_Optio43WR_PC-E.book Page 4 Thursday, February 12, 2004 10:33 AM Viewing Digital Camera Images on a Windows PC You can use the provided USB cable (I-USB7) or a card reader to transfer your digital camera’s images to the PC, and you can edit and print your images using the image viewing software. Here, the method for viewing images with the provided software (S-SW18) is explained. Software Provided The following software is included in the CD-ROM (S-SW18) provided. • Image viewing / ed
ページ7に含まれる内容の要旨
00_Optio43WR_PC-E.book Page 5 Thursday, February 12, 2004 10:33 AM * Some formats may require viewing with QuickTime 6.0 or later and DirectX 8.0 or later. * To install ACDSee for PENTAX, Windows Installer Service Version 2.0 may be required. i You can download DirectX and Windows Installer Service from the following website. http://www.microsoft.com/windows/directx http://www.microsoft.com/windows2000/techinfo/ howitworks/management/installer.asp (6 languages: English, Germa
ページ8に含まれる内容の要旨
00_Optio43WR_PC-E.book Page 6 Thursday, February 12, 2004 10:33 AM Installing the Software This section describes the procedures for installing the necessary software. Installing the USB driver p.6 Installing the image processing software (ACDSee for PENTAX) p.10 Installing the USB driver on Windows 98/98 SE only If you are using Windows 2000, Windows Me or Windows XP, you do not need to install the USB driver. When you connect the camera to your computer with the USB cable, your comput
ページ9に含まれる内容の要旨
00_Optio43WR_PC-E.book Page 7 Thursday, February 12, 2004 10:33 AM 5 Click [Next]. 6 Select [Search for the best driver for your device] and click [Next]. 7 Select [CD-ROM drive] and click [Next]. If another item has been selected, click the box to deselect it. 8 Confirm that [PENSSTOR.INF] is displayed and click [Next]. Installation of the driver starts. 7
ページ10に含まれる内容の要旨
00_Optio43WR_PC-E.book Page 8 Thursday, February 12, 2004 10:33 AM 9 Click [Finish]. When installation is finished, installation of the driver for the new hardware starts. 10 Click [Next]. 11 Select [Search for the best driver for your device] and click [Next]. 12 Select [CD-ROM drive] and click [Next]. If another item has been selected, click the box to deselect it. 8
ページ11に含まれる内容の要旨
00_Optio43WR_PC-E.book Page 9 Thursday, February 12, 2004 10:33 AM 13 Confirm that [PENSPDR.INF] is displayed and click [Next]. 14 Click [Finish]. When installation is finished, the Wizard window is exited. 15 Double-click [My Computer] on the desktop. A removable disk will be added. 9
ページ12に含まれる内容の要旨
00_Optio43WR_PC-E.book Page 10 Thursday, February 12, 2004 10:33 AM Installing the image processing software (ACDSee for PENTAX) This section describes the procedures for installing ACDSee for PENTAX which lets you view and edit recorded images on your computer. When multiple accounts have been setup in Windows 2000 or Windows XP, login by the authority of the administrator before installing the software. 1 Turn your computer on. 2 Insert the CD-ROM (S-SW18) into your CD-ROM drive. The P
ページ13に含まれる内容の要旨
00_Optio43WR_PC-E.book Page 11 Thursday, February 12, 2004 10:33 AM The Setup screen will appear. Follow the on-screen guidance and enter the registration information. Reboot your PC after installation finish. • If QuickTime 6.0 or later is not already installed in your PC, a message such as the one shown on the right is displayed before the Setup screen appears. Click [Install QuickTime] to first install QuickTime 6.0. The panoramic image software “Photostitcher”, the image layout a
ページ14に含まれる内容の要旨
00_Optio43WR_PC-E.book Page 12 Thursday, February 12, 2004 10:33 AM Product Registration on the Internet Please click the [Product Registration] of the CD-ROM screen in step 4 on the page 10 of this PC manual. A world map of the Internet Product Registration is displayed. If your PC is connected to the Internet, click the displayed country or region and then follow the instructions to register your product. Thank you very much for your cooperation. Only the customers of displayed count
ページ15に含まれる内容の要旨
00_Optio43WR_PC-E.book Page 13 Thursday, February 12, 2004 10:33 AM Copying Images to your PC An explanation of how to copy images using ACDSee for PENTAX is shown below. Refer to the “About ACDSee for PENTAX” ( p.26) to view or edit the copied images. Setting the USB Connection mode to [PC] 1 Press the MENU button in Playback mode. 2 Press the four-way controller (5) to display [B Set-up] menu. 3 Use the four-way controller (23) Set-up to select [USB Connection]. USB Connection PC Scree
ページ16に含まれる内容の要旨
00_Optio43WR_PC-E.book Page 14 Thursday, February 12, 2004 10:33 AM Copying Images to your PC 1 Turn your computer on. 2 Turn your camera off and connect it to the PC with the USB cable. Confirm that the SD Memory Card is inserted in the camera when the images in the SD Memory Card are copied. 3 Turn your camera on. The Device Detector screen is displayed automatically. If the Device Detector screen is not displayed, display / copy the images following the steps in “When the Device Detecto
ページ17に含まれる内容の要旨
00_Optio43WR_PC-E.book Page 15 Thursday, February 12, 2004 10:33 AM 5 Click [Browse]. The [Browse For Folder] screen is displayed. 6 Select a destination folder and click [OK]. 7 Click [Next]. The image is copied to the PC, and the ACDSee for PENTAX Browser starts. 15
ページ18に含まれる内容の要旨
00_Optio43WR_PC-E.book Page 16 Thursday, February 12, 2004 10:33 AM When the Device Detector screen is not displayed. 4 Double-click the [ACDSee for PENTAX] icon on the desktop. 5 Double-click [My Computer]. 6 Double-click [Removable Disk] (If the SD Memory Card has a volume label name, then select that name). 7 Double-click the [DCIM] folder. 8 Click the [xxxPENTX] folder. (xxx is a 3-digit number.) 16
ページ19に含まれる内容の要旨
00_Optio43WR_PC-E.book Page 17 Thursday, February 12, 2004 10:33 AM 9 Select [Copy To…] from the [Edit] menu. The Copy Files screen is displayed. 10 Click [More>>] and select the destination folder. 11 Click [OK]. The image is copied to the PC. 17
ページ20に含まれる内容の要旨
00_Optio43WR_PC-E.book Page 18 Thursday, February 12, 2004 10:33 AM Disconnecting the Camera from your PC Windows 2000 / Me 1 Double-click the [Unplug or eject hardware] icon in the task bar recognized area. The [Remove Hardware] screen will appear. 2 Confirm that [PENTAX USB DISK Device] is selected and click [Stop]. The [Stop Hardware Device] screen will appear. 3 Confirm that [PENTAX USB DISK Device] is selected and click [OK]. A message will appear. 4 Click [OK]. 5 Turn off the ca
