ページ1に含まれる内容の要旨
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 1
DOUBLE DIN SIZE CD/MP3/WMA/MD/DSP RECEIVER
DPX-8030MD
INSTRUCTION MANUAL
COMPACT
DIGITAL AUDIO
©B64-2329-00/00 (MW)
ページ2に含まれる内容の要旨
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 2 Contents Safety precautions......................3 Tuner features...........................19 External TV control features....27 Tuning Tuning About CDs...................................5 Direct Access Tuning Direct Access Tuning Notes on playing MP3/WMA.......6 Station Preset Memory Channel Preset Memory Notes on playing MD Group.......8 Auto Memory Entry Preset Tuning About MDs..................................9 Preset Tuning Function Setting Syste
ページ3に含まれる内容の要旨
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 3 Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION About the disc changer to be To prevent injury or fire, take the To prevent damage to the machine, connected: following precautions: take the following precautions: To connect a disc changer having the "O-N" • Insert the unit all the way in until it is fully • Make sure to ground the unit to a negative switch to this unit, set the "O-N" switch to "N". locked in place. Otherwise it may fall out
ページ4に含まれる内容の要旨
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 4 Safety precautions Lens Fogging Cleaning the CD Slot NOTE Right after you turn on the car heater in cold As dust tends to accumulate in the CD slot, • If you experience problems during weather, dew or condensation may form on clean it every once in a while. Your CDs can get installation, consult your Kenwood dealer. the lens in the CD player of the unit. Called scratched if you put them in a dusty CD slot. lens fogging, CDs may be impossible to play. •
ページ5に含まれる内容の要旨
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 5 About CDs Handling CDs CD cleaning CD storage • Don’t touch the recording surface of the CD. Clean from the center of the disc and move • Don’t place them in direct sunlight (On the outward. seat or dashboard etc.) and where the temperature is high. • Store CDs in their cases. Removing CDs When removing CDs from this unit pull them • CD-R and CD-RW are easier to damage than out horizontally. a normal music CD. Use a CD-R or a CD-RW after reading the ca
ページ6に含まれる内容の要旨
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 6 Notes on playing MP3/WMA This unit can play MP3(MPEG1, 2, 2.5 Audio Layer 3)/WMA. Note, Entering ID3 tag and Contents however, that the MP3/WMA recording media and formats Description acceptable are limited. When writing MP3/WMA, pay attention to The Displayable ID3 tag is ID3 version the following restrictions. 1.x. The right table shows the characters Acceptable media that can be displayed in this unit. The MP3/WMA recording media acceptable to this
ページ7に含まれる内容の要旨
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 7 When a File Search is executed with file ¡$ being played ... MP3/WMA playing order When selected for play, Folder Search, File Search, or for Folder Operation of the button Current Select, files and folders are accessed in the order in which they were file number 4 Button ¢ Button written by the CD writer. Because of this, the order in which they are expected to be played Beginning of file may not match the order in which they are actually played. Y
ページ8に含まれる内容の要旨
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 8 Notes on playing MD Group This unit is equipped with the group management function that When a Track Search is executed with track ¡6 being played ... enables quick search for a track you want to listen from the grouped MDs (MDs with group registration thereafter). Operation of the button Current (Refer to the instruction manual of home audio equipped with the Track number 4 Button ¢ Button group function or another equipment for the creation of MD.
ページ9に含まれる内容の要旨
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 9 About MDs • Do not leave the MD in a place exposed to Handling Mini discs direct sunlight (such as on a dashboard) or in • The MD shutter is designed so that it cannot other places that attain high temperatures. be opened. If forced open, the cartridge will be damaged and use of the MD will no The MD cartridge will become misshapen longer be possible. If the shutter has been and will no longer be usable. opened due to some cause, be careful not • MDs
ページ10に含まれる内容の要旨
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 10 General features Power EQ/ Volume S.A/ 4 DSP AUD/X'Over CLK ¢ Control Turning ON the Power Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. Volume Increasing Volume Turn the [Volume Control] knob clockwise. Decreasing Volume Turn the [Volume Control] knob counterclockwise. ANG DISP/ #1 - #3 SRC ATT / AM FM NAME DEMO Attenuator Turning the volume down quickly. Press the [ATT] button. Each time the button is p
ページ11に含まれる内容の要旨
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 11 Selecting the Source Clock Display Press the [SRC] button. Press the [CLK] button for at least 1 second. Each time the button is pressed for at least 1 second the clock Source required Display display turns ON or OFF. Tuner "TUNER" MD "Mini Disc" CD "Compact Disc" External disc "CD Changer"/"MD Changer" Auxiliary input "AUX" External TV "TV" Adjusting Clock Standby (Illumination only mode) "ALL OFF" 1 Enter Standby Press the [SRC] button. • When a med
ページ12に含まれる内容の要旨
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 12 General features For Disc name registration refer to (page 14). Switching the display mode. Press the [DISP] button. The Reference for the display content is after this operation's explanation. The each screen graphic can be changed. In MP3/WMA source - Full Screen Graphic Switching: page 13 Information Display - Half Screen Graphic Switching: page 14 Full screen graphic + Track time "P-Time" H
ページ13に含まれる内容の要旨
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 13 Full Screen Graphic Switching In MD source Switching the full screen graphic. Information Display Full screen graphic + Track time "P-Time" 1 Select the full screen graphic Half screen graphic + Disc title "Disc Title" Press the [DISP] button. + Track time Refer to (page 12). Half screen graphic + Group title "Group Title" 2 Switch the graphic + Track time* Press the [S.A] button. Half screen graphic + Track title "Track Title
ページ14に含まれる内容の要旨
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 14 General features 4 Select the character type Half Screen Graphic Switching Press the [38] button. Switching the half screen graphic. Each time the button is pressed the character type switches as shown below. 1 Select the half screen graphic Press the [DISP] button. Character type Display Refer to (page 12). Alphabet upper case "A" Alphabet lower case "a" 2 Switch the graphic Numbers and symbols " " Press the [S.A] button. * E
ページ15に含まれる内容の要旨
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 15 Auxiliary Input Name Setting Balance/ Fader Control Selecting the display when this device is switched to Auxiliary 1 Enter Audio Control mode input source. Press the [AUD/X’Over] button for at least 1 second. "AUDIO CONTROL MODE" is displayed. 1 Select Auxiliary input source Press the [SRC] button. 2 Select the Balance/ Fader Control mode Select the "AUX"/"AUX1" display. Press the [AUD/X’Over] button. Select the "BAL/FAD" display. 2 Enter Auxiliary i
ページ16に含まれる内容の要旨
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 16 General features Amp control mode: X’Over & Amp Control Adjustment Item Display Range 1 Enter Audio Control mode Bass boost level "Amp Bass" Flat/+6/ +12/ +18 (dB) Press the [AUD/X’Over] button for at least 1 second. Central frequency boost "Amp Freq" Normal/ Low "AUDIO CONTROL MODE" is displayed. •* This mode is available only when (page 30) 2 Select the X’Over or Amp Control mode is set on "N-F". Press the [AUD/X’Over] button. • R
ページ17に含まれる内容の要旨
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 17 Setting Display Non-Fading level cannot be preset into the memory. Stadium "STADIUM" Concert Hall "CONCERT" Club Disco "CLUB DISCO" Church "CHURCH" DSP(Digital Signal Processor) System Listening "LISTENING" Turning the DSP effects ON or OFF. Bypass "BYPASS" A DSP is a device which uses digital control to correct the audio When operation stops for 10 seconds, the Sound Field Setting signal and produce sound effects that can compensate for the closes. s
ページ18に含まれる内容の要旨
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 18 General features Recalling the equalizer curve Equalizer Curve Adjustment 1 Enter the Equalizer control mode You can create your own equalizer curves. Press the [EQ] button. 1 Enter the Equalizer control mode "EQ CONTROL MODE" is displayed. Press the [EQ] button. 2 Call up the equalizer curve "EQ CONTROL MODE" is displayed. Press the [#1] — [#3] button. 2 Select the frequency Press the [4] or [¢] button. Item Setting Frequency "60Hz" — "16kHz" The num
ページ19に含まれる内容の要旨
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 19 Tuner features Tuning 4 FNC ¢ Selecting the station. #1 - #6 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Press the [4] or [¢] button. During reception of stereo stations the "ST" indicator is ON. CRSC SRC AM FM Direct Access Tuning (Function of remote) Entering the f
ページ20に含まれる内容の要旨
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 20 Tuner features Station Preset Memory Preset Tuning Putting the station in the memory. Calling up the stations in the memory. 1 Select the band 1 Select the band Press the [FM] or [AM] button. Press the [FM] or [AM] button. 2 Select the frequency to put in the memory 2 Call up the station Press the [4] or [¢] button. Press the [#1] — [#6] button. 3 Put the frequency in the memory Press the [#1] — [#6] button for at least 2 seconds. The preset number di
