ページ1に含まれる内容の要旨
CD-RECEIVER
KDC-6060R
INSTRUCTION MANUAL
KDC-5060R
COMPACT
DIGITAL AUDIO
© B64-1077-00 (EW)
ページ2に含まれる内容の要旨
Contents Before use Disc control features Safety precautions ........................................................................3 Playing CDs.................................................................................21 Handling Compact discs................................................................5 Playing Other Disc mode ............................................................22 Fast Forwarding and Reversing Disc Play...................................23 Buttons and Displa
ページ3に含まれる内容の要旨
Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION You cannot connect the unit directly to the following CD automatic changers. For users To prevent injury and/or fire, take the To prevent damage to the machine, who want to use older changers with the following precautions: take the following precautions: unit, follow the directions below according to • Insert the unit all the way until it is fully • Make sure to ground the unit to a negative the type of changer you own: locked in place.
ページ4に含まれる内容の要旨
Safety precautions Cleaning the Faceplate Terminals The marking of products using lasers NOTE If the terminals on the unit or faceplate get (Except for some areas) • If you experience problems during dirty, wipe them with a dry, soft cloth. installation, consult your Kenwood dealer. • If the unit does not seem to be working right, Cleaning the CD Slot CLASS 1 try pressing the reset button first. If that does As dust can accumulate in the CD slot, clean LASER PRODUCT not solve the problem, consu
ページ5に含まれる内容の要旨
Handling Compact discs slot, such as stabilisers, protective sheets, or Playing a CD that is dirty, scratched Cleaning CDs CD cleaning discs, since they can cause the or warped can cause the sound to If a CD has become dirty, wipe it off gently unit to malfunction. using a commercially available cleaning cloth skip and the unit to operate or a soft cotton cloth, starting from the incorrectly, resulting in worsened centre of the disc and moving outward. Do Removing the CD sound quality. Take the
ページ6に含まれる内容の要旨
Buttons and Display Basic operations Tuner features SRC / d uATT 4 FM PWR OFF ¢
4 FM SRC ¢
40W 4 x PTY @ PWR 40W 4 x PTY @ PWR SRC SRC OFF OFF FM FM DISC DISC ATT LOUD SCAN RDM REP D.SCN M.RDM VOL ADJ MENU ATT LOUD SCAN RDM REP D.SCN M.RDM VOL ADJ MENU AM AM DISP/TEXT DISP/TEXT 123 4 56 TI AUDIO 123 4 56 TI AUDIO NAME.S NAME.S DISP ATT / LOUD MENU AM #1~6 MENU AM for KDC-6060R for KDC-6060R LOUD indicator ATT indicator ST indicator Preset station number Frequency LOUD ATT TI ST TI FM FM
ページ7に含まれる内容の要旨
RDS features Disc control features 38/ Release button 4 FM PTY ¢ 4 FM /DISC+ 38 SRC ¢ 40W x 4 PTY @ PWR PTY @ PWR SRC 40W x 4 SRC OFF OFF FM FM DISC DISC ATT LOUD SCAN RDM REP D.SCN M.RDM VOL ADJ MENU ATT LOUD SCAN RDM REP D.SCN M.RDM VOL ADJ MENU AM AM DISP/TEXT DISP/TEXT 1 2 3 4 5 6 TI AUDIO 1 2 3 4 5 6 AUDIO TI NAME.S NAME.S #1~6 TI / MENU AM DISP SCAN REP M.RDM MENU AM /DISC- DISP/ RDM VOL ADJ D.SCN NAME.S for KDC-6060R for KDC-6060R Track time/ Direct inputted track number/ TA indicator
ページ8に含まれる内容の要旨
Buttons and Display Other features Remote control Optional for the KDC-6060R Release button 4 FM SRC ¢ PTY @ PWR 40W x 4 SRC OFF FM DISC TUNER ATT LOUD SCAN RDM REP D.SCN M.RDM VOL ADJ MENU AM DISP/TEXT #0~9 1 2 3 4 5 6 AUDIO TI NAME.S A~Z CD ABC DEF TUNER 1 2 3 AUDIO /MENU AM TUNE + GHI JKL MNO CD¥MD CH 4 5 6 TAPE ¢ PRS TUV WXY for KDC-6060R TRACK + CD 7 8 9 DIRECT QZ OK TUNE – DIRECT CD·MD 0 OK CH 4 Clock display TRACK – DNPP u – + TUNE LOUD A AT TT T TRACK VOL. T I d AM FM PROG – + AM DISC
ページ9に含まれる内容の要旨
Basic operations (See page 6) Power Volume Turning on the power: Increasing Volume: Press the SRC button. Press the u button to turn up the volume. NOTE Decreasing Volume: Press the d button to turn down the volume. Turn the power on before carrying out the following procedures. Turning off the power: Hold down the PWR OFF button for one second or more. Attenuator This function allows you to turn down the volume quickly. Turning Attenuator On/Off: Press the ATT button to switch the attenuator on
ページ10に含まれる内容の要旨
Basic operations (See page 6) Menu System Varieties of settings for Function each function (display) To accommodate a greater number of functions, a menu system has been employed for making settings. Press the MENU button to enter the menu mode and then display the function to make the setting. Details on each setting are Switching Clock Display CLK ON CLK OFF explained separately in the corresponding function page. ›fl Time Adjustment (Manual) CLK ADJ (Time Adjustment 1 Hold down the MENU bu
ページ11に含まれる内容の要旨
NOTE • Make sure to end the menu mode when finished. If you fail to end the menu mode, several functions may not operate properly, including the Traffic Information function, the News Bulletin function with PTY news timeout setting, and the Alarm function. • The News function turns on when the setting is made for the news interruption interval. The "##M" display indicates the setting selected for the news interruption timeout interval. — 11 —
ページ12に含まれる内容の要旨
Tuner features (See page 6) Selecting Tuning Mode Tuning You can choose from three tuning modes: auto seek, preset 1 Press the SRC button repeatedly until tuner mode is obtained. station seek, and manual. The “AUTO1” indicator lights up "TUNER" is displayed when the tuner mode has been selected. when auto seek tuning is selected, and the “AUTO2” indicator lights when preset station seek tuning is selected. 2 Press either the FM or AM button to select the band. Each time you press the FM button,
ページ13に含まれる内容の要旨
Local Seek Function Station Preset Memory With the local seek function turned on, auto seek tuning skips Store the frequency of the station currently being listened to. stations with relatively poor reception. You can then recall that station with a single touch of a button. Turning Local Seek Function On/Off: 1 1 Select the band/ station that you want to have stored. Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. 2 Hold down the button (#1-
ページ14に含まれる内容の要旨
Tuner features (See page 6) Function of remote control with number/letter entry buttons Auto Memory Entry (See page 8) You can automatically store all the receivable frequencies in Direct Access Tuning the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful When you already know the frequency of the station that you when you are travelling and do not know what stations are want to listen to, you can enter it directly for qu
ページ15に含まれる内容の要旨
Function of remote control with DNPP button (See page 8) Switching Display for Tuner (non-RDS station) Preset station seek with Programme service name Switching the Display: Each time you press the DISP button, the display switches You can search for the preset station with Programme Service between the frequency and Clock. name. NOTE 1 Press the DNPP button on the remote control. • When the switching clock display (P.32) is set to off, the display “SNP PLAY” will be displayed once the seek mod
ページ16に含まれる内容の要旨
RDS features (See page 7) RDS (Radio Data System) AF (Alternative Frequency) Function RDS is a digital information system that lets you receive When poor reception is experienced, automatically switch to signals besides those of regular radio programmes, such as another frequency broadcasting the same programme in the network information being transmitted from radio stations. same RDS network with better reception. When listening to an RDS station (ie, a station with RDS The ª indicator lights u
ページ17に含まれる内容の要旨
Restricting RDS Region (Region Restrict Function) Traffic Information Function You can choose whether or not to restrict the RDS channels, You can listen to traffic information. If you are listening to received with the AF function for a particular network, to a tapes or discs, they will continue playing until a traffic bulletin specific region. When the Region Restrict Function is on, the is broadcast. region is restricted and the REG indicator is turned on. Turning TI function On/Off: Turning
ページ18に含まれる内容の要旨
RDS features (See page 7) Auto TP Seek Function Presetting Volume for Traffic Information/News When the TI function is on and poor reception conditions are Preset the volume level to be used for traffic information and experienced when listening to a traffic information station, news broadcasts. another traffic information station with better reception will 1 be searched for automatically. This function is on, when unit Tune into the station for which you want to set the volume. is first powered
ページ19に含まれる内容の要旨
News Bulletin Function NOTE with PTY News Timeout Setting If you choose the "20M" setting, further news bulletins will not be received for 20 minutes once the first news bulletin is received. You can arrange to have news bulletins interrupt your current Setting the interval at the "00M" factory default indicates no listening source, including other radio stations. When the News Timeout will be made, meaning that additional news News Bulletin function is on, the PTY News Timeout setting bulletins
ページ20に含まれる内容の要旨
RDS features (See page 7) (Speech.....1~9,16~23, 29, Music.....10~15, 24~28) Programme Type (PTY) Function • You can select the type of programme directly by pressing a Conduct auto seek tuning only on those stations with selected preset button. The buttons are factory-set to the following kinds of programmes. type of programmes: 1. Music 2. Speech 3. News 1 Press the 38(PTY) button. 4. Other Music 5. Serious Classical 6. Varied “PTY” is displayed, and the Programme Type Selection (PTY) NOTE Mod
