KDC-519_U.S (K) r4 01.10.19 0:13 PM Page 1 CD-RECEIVER KDC-519 INSTRUCTION MANUAL AMPLI-TUNER LECTEUR DE CD KDC-5019 MODE D’EMPLOI REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warrant
ページ2に含まれる内容の要旨
KDC-519_U.S (K) r4 01.10.19 0:13 PM Page 2 Contents Warning .......................................3 CD/External disc control Basic Operations of remote......21 features ..................................14 Loading and Replacing the battery Safety precautions......................4 Playing CD Basic operations About CDs...................................6 Playing External Disc In Tuner source General features .........................7 Fast Forwarding and Reversing In Disc source Power Track S
ページ3に含まれる内容の要旨
KDC-519_U.S (K) r4 01.10.19 0:13 PM Page 3 2Warning NOTE 2CAUTION This equipment has been tested and found to Use of controls or adjustments or performance comply with the limits for a Class B digital of procedures other than those specified device, pursuant to Part 15 of the FCC Rules. herein may result in hazardous radiation These limits are designed to provide exposure. reasonable protection against harmful In compliance with Federal Regulations, interference in a residential installation
ページ4に含まれる内容の要旨
KDC-519_U.S (K) r4 01.10.19 0:13 PM Page 4 Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION About the disc changer to be To prevent injury or fire, take the To prevent damage to the machine, connected: following precautions: take the following precautions: To connect a disc changer having the "O-N" • Insert the unit all the way in until it is fully • Make sure to ground the unit to a negative switch to this unit, set the "O-N" switch to "N". locked in place. Otherwise it may fall ou
ページ5に含まれる内容の要旨
KDC-519_U.S (K) r4 01.10.19 0:13 PM Page 5 Lens Fogging NOTE Right after you turn on the car heater in cold • If you experience problems during weather, dew or condensation may form on installation, consult your Kenwood dealer. the lens in the CD player of the unit. Called lens fogging, CDs may be impossible to play. • If the unit fails to operate properly, press the In such a situation, remove the disc and wait Reset button. The unit returns to factory for the condensation to evaporate. If t
ページ6に含まれる内容の要旨
KDC-519_U.S (K) r4 01.10.19 0:13 PM Page 6 About CDs Handling CDs CD cleaning • Don’t touch the recording surface of the CD. Clean from the center of the disc and move outward. Removing CDs When removing CDs from this unit pull them • CD-R and CD-RW are easier to damage than out horizontally. a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. CDs that can’t be used • Don’t stick tape etc. on the CD. • CDs that aren’t round can’t be used. Also, don’t u
ページ7に含まれる内容の要旨
KDC-519_U.S (K) r4 01.10.19 0:13 PM Page 7 General features Power 38 u / d SRC AM FM ANG Turning ON the Power Turn the vehicle ignition ON. The faceplate reverses and control panel is displayed. Turing OFF the Power Turn the vehicle ignition OFF. When the set time for removing the faceplate (page 20) lapses, the faceplate reverses and the control panel is hidden. Do not apply force to the faceplate during operation. It can cause damage. When the power is ON, the (page 18) is d
ページ8に含まれる内容の要旨
KDC-519_U.S (K) r4 01.10.19 0:13 PM Page 8 General features Press the [Q] button. Volume Each time the button is pressed the sound setting switches. Increasing Volume Sound setting Display Press the [u] button. Flat "Flat" Decreasing Volume Rock "Rock" Press the [d] button. Top 40 "Top 40" Pops "Pops" Jazz "Jazz" Easy "Easy" Attenuator Scan of Flat — Easy "Scan" Turning the volume down quickly. User memory "User" Press the [ATT] button. • User memory: The values set on the
ページ9に含まれる内容の要旨
KDC-519_U.S (K) r4 01.10.19 0:13 PM Page 9 Treble level "Treble" –8 — +8 Switching Display Balance "Balance" Left 15 — Right 15 Switching the information displayed. Fader "Fader" Rear 15 — Front 15 Press the [DISP] button. Volume offset "V Offset" –8 — ±0 Each time the button is pressed the display switches as shown Volume offset: Each source's volume can be set as a difference below. from the basic volume. In Tuner source 5 Exit Audio Control mode Information Display Press the [AUD] button.
ページ10に含まれる内容の要旨
KDC-519_U.S (K) r4 01.10.19 0:14 PM Page 10 General features Characters can be entered by using a remote with a number Switching Clock Display buttons. Switching the displayed information. Example: If "DANCE" is entered. Press the [CLK] button. Character Button #Times pressed Each time the button is pressed it switches between clock "D" [#3] 1 display and current source. "A" [#2] 1 During clock display the clock indicator is ON. "N" [#6] 2 "C" [#2] 3 "E" [#3] 2 6 Repeat steps 3 through 5 and
ページ11に含まれる内容の要旨
KDC-519_U.S (K) r4 01.10.19 0:14 PM Page 11 The presently selected AUX Name is displayed. Theft Deterrent Faceplate 3 Select the Auxiliary input display The faceplate of the unit can be detached and taken with you, Press the [4] or [¢] button. helping to deter theft. Each time the button is pressed it switches through the below Removing the Faceplate displays. • "AUX" 1 Turn the ignition OFF or press the [SRC] button for at least 1 • "TV" second. • "VCP" The power turns OFF and the faceplate
ページ12に含まれる内容の要旨
KDC-519_U.S (K) r4 01.10.19 0:14 PM Page 12 General features Tuner features Hiding the Control Panel Prevents tampering with the unit while your car is being serviced SRC AM FM etc. Hiding the control panel Press the [SRC] button for at least 1 second. The faceplate slides open. When the time set in (page 20) lapses, the faceplate is hidden and the power turns OFF. Showing the control panel Press the left part at the upper side of the faceplate. The faceplate will open
ページ13に含まれる内容の要旨
KDC-519_U.S (K) r4 01.10.19 0:14 PM Page 13 Tuning Mode Direct Access Tuning (Function of remote) Choose the tuning mode. Entering the frequency and tuning. Press the [AUTO] button. 1 Select the band Each time the button is pressed the Tuning mode switches as Press the [FM] or [AM] button. shown below. 2 Enter Direct Access Tuning mode Tuning mode Display Operation Press the [DIRECT] button on the remote. Auto seek "Auto1" Automatic search for a station. The "– – – –" display. Preset station
ページ14に含まれる内容の要旨
KDC-519_U.S (K) r4 01.10.19 0:14 PM Page 14 Tuner features CD/External disc control features Auto Memory Entry Putting stations with good reception in the memory 38 SRC AM FM 0 automatically. 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes. SCAN RDM REP M.RDM 4 / ¢ DISP Preset Tuning Calling up the stations in the me
ページ15に含まれる内容の要旨
KDC-519_U.S (K) r4 01.10.19 0:14 PM Page 15 Playing CD Playing External Disc Playing discs set in the optional accessory disc player connected When a CD isn't inserted to this unit. 1 Slide open the faceplate Press the [SRC] button. Press the [0] button. Select the display for the disc player you want. 2 Insert a CD. Display examples: When the faceplate has been slid open, it might interfere with the Display Disc player shift lever or something else. If this happens, pay attention to safety "
ページ16に含まれる内容の要旨
KDC-519_U.S (K) r4 01.10.19 0:14 PM Page 16 CD/External disc control features 2 Do Album Search Track Search Press the [DISC+] or [DISC–] button. Selecting the song you want to hear. Canceling Direct Album Search Press the [4] or [¢] button. Press the [38] button. Input "0" to select disc 10. Album Search (Function of disc changer) Selecting the disc you want to hear. Track/Album Repeat Press the [AM] or [FM] button. Replaying the track/disc you're listening to. Press the [REP] button. Each t
ページ17に含まれる内容の要旨
KDC-519_U.S (K) r4 01.10.19 0:14 PM Page 17 Random Play DNPP (Disc Name Preset Play) (Function of Remote) Playing all the songs on the disc in random order. Selecting the CD displayed in the DNPS of the CDs set in the Press the [RDM] button. Disc changer. Each time the button is pressed Random Play turns ON or OFF. When it's ON, "Random ON" is displayed. 1 Enter DNPP mode When the [¢] button is pressed, the next song select starts. Press the [DNPP] button on the remote. When "DNPP" is displa
ページ18に含まれる内容の要旨
KDC-519_U.S (K) r4 01.10.19 0:14 PM Page 18 Menu system Menu System Setting during operation beep sound etc. functions. SRC AM FM The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Press the [FM] or [AM] button. Example: When you want to set the beep sound select the #1 – 4 DISP 4 / ¢
ページ19に含まれる内容の要旨
KDC-519_U.S (K) r4 01.10.19 0:14 PM Page 19 When the Security Code function is activated, the code can't be 1 Turn the power ON. changed and the function can't be released. 2 Do the step 4 and 5 operation, and enter the Security Code. Note, the Security Code can be set as the 4 digit number of your "APPROVED" is displayed. choice. The unit can be used. 1 Enter Standby Press the [SRC] button. Select the "ALL OFF" display. Touch Sensor Tone 2 Enter Menu mode Press the [MENU] button for at least
ページ20に含まれる内容の要旨
KDC-519_U.S (K) r4 01.10.19 0:14 PM Page 20 Menu system Selectable Illumination Dimmer Selecting the button illumination color as green or red. Dimming this unit's display automatically when the vehicle light switch is turned ON. Display Setting Display Setting "Button Green" The illumination color is green. "Dimmer ON" The display dims. "Button Red" The illumination color is red. "Dimmer OFF" The display doesn't dim. Switching Graphic Display OFF Wait Time Setting Setting the graphic part di
