ページ1に含まれる内容の要旨
KENWOOD
KDC-X597
KDC-BTSSSU
KDC-BT355U
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER LECTEUR DE CD
MODE D'EMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
JVC KENWOOD Corporation
/IIIJI Designed for
-lliil Windows
~-™ Media™
Made for
works with
PANDOR.A
~ iPod C iPhone
Take the time to read through this instrudion manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new CO-receiver.
For
ページ2に含まれる内容の要旨
CONTENTS BEFORE USE BEFORE USE 2 A warning Do not operate any function that takes your attention away from safe driving. BASICS 3 GETTING STARTED 4 A caution Volume setting: RADIO 5 • Adjust the volume so that you can hear sounds outside the car to prevent accident. • Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the 6 CD I USB I iPod output level. AUX 7 General: • Avoid using the USB device or iPod/iPhone if it might hin
ページ3に含まれる内容の要旨
BASICS Faceplate Remote control (RC-406) rr~~~~~~::rL Remote sensor (Do not expose to bright sunlight.) Volume knob (turn/press) 13~•I=I§r=:=i~=tF=tF=tii=)=I====L=o=a=d r g s I ot Detach Pull out the insulation sheet when using for the first time. How to reset How to replace the battery Detach CR202s:Q button Your preset adjustments ~3 ! will also be erased. I _j Turn on the power Press(!) SRC. Press and hold SRC to turn off the power. • Press and hold to turn off the po
ページ4に含まれる内容の要旨
GETTING STARTED 1 Press t!> SRC to enter [STANDBY). 2 Press the volume knob to enter [FUNOION). 3 Turn the volume knob to select [INITIAL SET), then press the knob. 4 Turn the volume knob to make a selection (see the following table), then press the knob. 5 Press and hold~ to exit. • To return to the previous hierarchy, press~. When you turn on the power (or after you reset the unit), the display Default: XX shows: //CANCEL DEMO'' .. //PRESS// .. 'VOLUME KNOB// NORMAL/ NORM: Memorizes
ページ5に含まれる内容の要旨
RADIO Default XX SEEK MODE Selects the tuning method for the~ I~ buttons. AUTOl: Automatically searches for a station.; AUT02: Searches for a preset station.; MANUAL: Manually search for a station. AUTO YES: Automatically starts memorizing 6 stations with good reception.; NO: Cancels. MEMORY (Selectable only if [NORMAL] I [NORM] is selected for [PRESET TYPE].)(~ 4) MONO SET ON: Improves the FM reception, but the stereo effect may be lost.; OFF: Cancels. 1 Press(!) SRC to select TUNER. P
ページ6に含まれる内容の要旨
CD I USB I iPod Note: Pairing request (via Bluetooth) is CD automatically activated if an iPhone/ Label side ~: Eject disc iPod touch is connected through the USB input terminal. (-t10, 12) ttl : Applicable - : Not applicable The source changes to CD and playback Pause or resume Press 6 ~II (or ENT ~II on RC-406). starts. playback Select a track/file Press~ I~ (or~ I~(+) on RC-406). ttl ttl ttl USB Select a folder Press 1- I 2 +(or *AM- I #FM+ on RC-406). USB input terminal Rev
ページ7に含まれる内容の要旨
CD I USB I iPod AUX --------------------------------- Preparation: Select [ON] for [BUILT-IN AUX] I [BUILTIN AUX]. (-+ 4) While listening to iPod or KME Light/ KMC file ... 1 Press DIRECT. 1 Press the volume knob to enter [FUNGION]. 2 Press the number buttons to enter a track/file 2 Turn the volume knob to select [SETTINGS], then number. 1 Connect a portable audio player (commercially 3 Press~ I~(+) to search for music. press the knob. available). 3 Turn the volume knob to select [SK
ページ8に含まれる内容の要旨
pan d 0 fa® (for 13•Iil$tf4/13•MI:i .. ,.1e11l) Preparation: Preparation: Install the latest version of the Pandora application 1 Connect the optional SiriusXM Connect Vehicle into your device (iPhone/ iPod touch), then log in and Pause or Press 6 ...,.. .. (or press ENT ...,.. .. Tuner (commercially available). create an account with Pandora. on RC-406). resume • Select [ON] for [PANDORA SRC]. (-t 4) playback Thumbs up or Press 1 •12 4.. L.c=:::=======l Si ri usXM thumbs down • If
ページ9に含まれる内容の要旨
SiriusXM™ If a locked channel or a mature channel ([MATURE CH] is set to [ON]) is selected, a Default XX pass code input screen appears. Enter the pass code to receive the channel. • To store a channel of the current band: Press and hold one of the number buttons (1 to 6). • To select a stored channel of the current band: Press one of the number buttons (1 to 6) CODE SET OJ Turn the volume knob to select a number. 1 Press DIRECT to enter Direct Access Tuning. [I] Press ~ I~ to move to
ページ10に含まれる内容の要旨
BLUETOOTH® You can operate Bluetooth devices using this unit. • This unit supports Secure Simple Pairing (SSP). • Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device to the unit manually. Refer to the instruction manual of the Bluetooth device for more information. 1 Press C!> SRC to turn on the unit. MIC (Microphone 2 Search and select this unit model name (KDC-XS**/ KDC-BTS**U/ KDC-BT3**U) on the input term:y:hone (supplied) Bluetooth dev
ページ11に含まれる内容の要旨
BLUETOOTH• Bluetooth mobile phone 1 Press~ to enter Bluetooth mode. 2 Turn the volume knob to make a selection (see the following table), then Receive a call Press~ or the volume knob or one of the number press the knob. buttons (1 to 6) (or~ on RC-406). Repeat step 2 until the desired item is selected. • The~ button illuminates and flashes in green • To return to the previous hierarchy, press~. (for 13•11U1W/ l:oXtll:i,..,..,.111) or flashes in red • To cancel, press~. (for 13•Itll
ページ12に含まれる内容の要旨
BLUETOOTH• Default: XX You can search through the contacts quickly according to the PAIRING PHONE SELEO I Select the phone or audio device to connect or disconnect. first letter (A to Z), number (0 to 9), or symbol. PHONESEL • The second alphabet of the contact will be searched if the ------------------------ first alphabet does not exist. AUDIO SELEO/ AUDIO SEL 1 Press~ to enter Bluetooth mode. 2 Turn the volume knob to select [PHONE BOOK], then press DEVICE DELETE/ [I] Turn the volu
ページ13に含まれる内容の要旨
BLUETOOTH• Bluetooth audio player Operations and display indications may differ according to their availability on the 1 Press and hold ~. connected device. 2 Speak the name of the contact you want to call or the voice command to control the phone functions. Playback • Supported Voice Recognition features vary for each phone. Refer to the instruction 1 Press C!> SRC (or SRC on RC-406) to select manual of the connected phone for details. BTAUDIO . • This unit also supports the intellig
ページ14に含まれる内容の要旨
AUDIO SETTINGS While listening to any source ... PRESET EQ NATURAU USER/ ROCK/ POPS/ EASY/TOP40/ JAW POWERFUL: Selects 1 Press the volume knob to enter [FUNGION]. a preset equalizer suitable to the music genre. (Select [USER] to use the 2 Turn the volume knob to select [AUDIO CONTROL]/ [AUDIO GRL], then press the customized bass, middle, and treble settings.) knob. BASS BOOST B.BOOST LV1/ B.BOOST LV2/ B.BOOST LV3: Selects your preferred bass 3 Turn the volume knob to make a selection (s
ページ15に含まれる内容の要旨
DISPLAY SETTINGS 1 Press the volume knob to enter [FUNGION]. 2 Turn the volume knob to select [SETTINGS], then press the knob. DISP DIMMER ON: Dims the display illumination.; OFF: Cancels. 3 Turn the volume knob to make a selection (see the following table), then press the knob. TEXT SCROLL AUTO/ ONCE: Selects whether to scroll the display information automatically, or Repeat step 3 until the desired item is selected or activated. scroll only once.; OFF: Cancels. 4 Press and hold~ to ex
ページ16に含まれる内容の要旨
MORE INFORMATION General About iPod/iPhone • This unit can only play the following CDs: Made for - iPod touch (1st, 2nd, 3rd, and 4th generation) cOJD§@ cOJo§@ cOJD§@ - iPod classic DIOITALAUDIO &'ilm ~ - iPod with video ·······~ • Detailed information and notes about the playable audio files are stated in an online manual on the - iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) following site: www.kenwood.com/cs/ce/audiofile/ - iPhone, iPhone 3G, 3GS, 4, 4S • For the latest
ページ17に含まれる内容の要旨
TROUBLESHOOTING Sound cannot be heard. • Adjust the volume to the optimum level. "NO MUSIC" appears. Connect a USB device that contains playable audio files. • Check the cords and connections. "NA DEVICE" appears. Connect a supported USB device, and check the Check to be sure the terminals of the speaker wires are connections. "PROTECT" appears and no operations can be done. insulated properly, then reset the unit. If this does not solve "USBERROR"appea~. • Remove the USB device, turn the
ページ18に含まれる内容の要旨
TROUBLESHOOTING • II ADD ERROR" I II ADD ERR" New station creation is unsuccessful. No Bluetooth device is • Search from the Bluetooth device again. • "SEARCH ERROR" I "SEARCH ERR" detected. • Reset the unit.(-+ 3) "CHECK DEVICE" I "CHK DEVICE" Check the Pandora application on your device. Pairing cannot be made. • Make sure you have entered the same PIN code to both the unit and Bluetooth device. "NO SKIPS" The skip limit has been reached. ... "' 0 • Delete pairing information from both
ページ19に含まれる内容の要旨
SPECIFICATIONS FM Frequency Range •:olll$tr4/ 13•M=iieie1e11J: Version Bluetooth Ver.2.1 +EDR Certified 87.9 MHz to 107.9 MHz (200kHz space) Frequency Range 2.402 GHz to 2.480 GHz 13•M=iite1e11J: Output Power +4 dBm (MAX), 0 dBm (AVE) Power Class 87.5 MHz to 108.0 MHz (50 kHz space) ---------------------------------------------------------------------------------------------------------------- Maximum Communication Range Line of sight approx. 10 m (32.8 ft) Usable Sensitivity (SIN= 26
ページ20に含まれる内容の要旨
z lnstallating the unit (in-dash mounting) 0 1 - 1- u w z z 0 u ............ z 0 - I- Bend the appropriate tabs to hold cc the mounting sleeve firmly in place . .... .... When installing without the mounting sleeve cc @ @ 1- 1 Remove the mounting sleeve and trim plate from @@ @ the unit. ;/ /I z 2 Align the holes in the unit (on both sides) with the "' 8 mm ----8 mm - vehicle mounting bracket and secure the unit with _MAX. __ _l_MAX. the supplied screws. ~T!J ~G
