ページ1に含まれる内容の要旨
HEADPHONES
VOD705
POWER EJECT REV PLAY FWD STOP
PROVE8
AUTO SOURCE PICTURE
PROGRAM SELECT SELECT
CHANNEL VOLUME
ON OFF AUTO
8” LCD OVERHEAD
TV/MONITOR WITH
DVD PLAYER
®
ELECTRONICS CORP.
128-6700
VIDEO
L R
IN PUT
AUDIO
IR
ページ2に含まれる内容の要旨
IMPORTANT An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function then the vehicle is in ‘park’ or when the vehicle’s parking brake is applied. An LCD panel
ページ3に含まれる内容の要旨
Features · 8 Inch (4:3) TFT (Thin Film Transistor) Active Congratulations on your purchase of the Audiovox PROVE8 DVD Player with Drop-Down Video Monitor. Matrix LCD (Liquid Crystal Display) Monitor The PROVE8 has been designed to give you and your · Built-in DVD Player family many years of video entertainment in the mobile · Built-in TV Tuner environment. Please read the directions that follow · AVI Input to familiarize yourself with the product and to ensure that you obtain the best results
ページ4に含まれる内容の要旨
HEADPHONES Controls and Indicators Diagram 1 2 3 11 POWER EJECT REW V PLAY F.W F D STOP 4 12 25 13 5 6 14 AUTO PICTURE SOURCE PROGRAM SELECT 7 SELECT 15 CHANNEL VOLUME 16 17 8 ON OFF AUTO 9 10 18 19 20 24 21 22 23 Note : Audiovox recommends the use of the Audiovox HP275 Headphones when using Figure 1 wired headphones. VIDEO L R INPUT AUDIO ,5
ページ5に含まれる内容の要旨
Main Function Descriptions 1. DVD disc insertion slot. 2. Infrared Transmitter and Sensor – Use to transmit audio to wireless headphones. Also allows the remote control to operate the PROVE8 and to control other accessories in the system. 3. PLAY ( ) Button – This button is used to enter the play mode. 4. FWD ( ) Button – Allows the user to search in a forward direction at 2, 4, 6 and 8 times the normal speed. 5. STOP ( ) Button. - Pressing this button once will stop playback at the c
ページ6に含まれる内容の要旨
10.Screen Release – Moves in direction of the arrow to release the drop down screen. – 11.REV ( ) – Allows the user to search in a backwards direction. 12.Eject ( ) Button – Ejects Disc. 13.Power Button – Bright red when system is on, dim when off. 14.Source Select (TV, AV1, AUX, DVD). 15.TV Auto-program – Allows the user to scan and program active TV stations into memory. 16.Channel Up ( ) Button – Use this button to increase the channel number to the desired number. 17.Channel Down
ページ7に含まれる内容の要旨
Remote Control Operation 34 33 EJECT POWER FM TRANSMITTER ON/OFF SELECT 32 1 SOURCE 2 AUTO MEMORY Battery Installation 3 SKIP/ 31 SEARCH 4 ERASE/ VOL WRITE Before attempting to operate your Remote Control, 30 5 6 install the batteries as described below. CH 29 MUTE PIX 7 28 1) Turn the Remote Control face down. Using a 8 fingernail, lift the battery cover off. 9 ENTER 27 MENU SETUP 2) Install two “AAA” batteries as shown. Make 10 26 sure that proper polarity (+ or -) is observed. CH 25 A-B 1
ページ8に含まれる内容の要旨
DVD Function Descriptions *Function control is available on the unit and the remote control. 1. POWER Button* Press this button to turn the PROVE8 on. Press the button again to turn the PROVE8 off. 2. SOURCE Button* Video signals from video equipment connected to the audio / video inputs can be displayed on the monitor by pressing this button. Each time the button is pressed, the audio / video source will change the sources: DVD, TV, AV1 and AUX. 3. AUTO MEMORY Button* When the AUTO MEMORY butt
ページ9に含まれる内容の要旨
6. Channel Up ( ) Button Use this button to increase the channel number to the desired channel and to scroll upward in menu options. 7. MUTE Button Press this button to mute the audio. Pressing the button again restores sound to the previously set level. 8. ENTER Button Used to implement setting selected. 9. LEFT ( ) Button Allows the user to shift left in the menu options. 10. MENU Button Allows the user to access the main menu. 11. RETURN Button Allows the user to return to the menu w
ページ10に含まれる内容の要旨
13. DISPLAY Button Press to display DVD Disc current information. Press DISPLAY button DVD Player Perform Once Display current TITLE & CHAPTER Twice Display current SUBTITLE 3 times Display current AUDIO language & channel 4 times Display SURROUND current status 5 times Display current ANGLE 6 times Display A-B current status 7 times Display REPEAT current status 8 times Display is turn off For Title & Chapter, use cursor buttons to do ti
ページ11に含まれる内容の要旨
17. REV ( ) Button* Allows the user to search in a backward direction at 2,4, 6 and 8 times the normal speed. 18. FWD ( ) Button* Allows the user to search in a forward direction at 2,4, 6 and 8 times the normal speed. 19. PLAY ( )Button* Press this button to activate the play mode while a disc is loaded into the disc compartment. 20. STOP (#####) Button* DVD disc play will be stopped. 21. DVD Mode Select button Switches certain function keys on the remote control for DVD functions.
ページ12に含まれる内容の要旨
26. SETUP Button Allows the user to select the DVD player’s options (Display, OSD Language, Defaults, Parental Control, Password, Exit Setup). 27. RIGHT ( ) Button Allows the user to shift to the right in the menu options. 28. PIX Button (PICTURE SELECT)* Each time this button is pressed, the on screen picture adjustment display the “adjustment bars” for BRIGHTNESS, CONTRAST, COLOR or TINT. Once the desired adjustment bar is displayed, use the VOLUME UP/DOWN buttons to adjust the setting.
ページ13に含まれる内容の要旨
32. EJECT(▲▲▲ ) Button* ▲▲ The disc will be ejected from disc compartment. 33. FM TRANSMITTER SELECT Button Selects the FM modulator Frequency (Frequency 1: 88.3MHz, Frequency 2: 88.7MHz, Frequency 3: 89.1MHz, Frequency 4: 89.5MHz, Frequency 5: 89.9MHz). 34. FM TRANSMITTER ON/OFF Button Turns FM Modulator power on/off and switches between the video program audio (Pod audio) and Satellite radio audio (Sat audio).
ページ14に含まれる内容の要旨
Turning the PROVE8 On or Off 1. Sliding the screen release lock forward will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached. The internal friction will hold the screen in position while the system is in use. 2. Pressing the power button on the unit or the remote control will turn the system on or off alternately. When in use the internal backlighting will illuminate the controls. 3. After the unit has been turned on a
ページ15に含まれる内容の要旨
HEADP HONES 3. (B) To tune weak or marginal channels with the CHANNEL UP/DOWN buttons , press the SKIP/SEARCH button on the Remote Control Unit until “SKIP MODE OFF” is displayed on the bottom of the screen. Tune to the desired channel using the CHANNEL UP/DOWN buttons or go directly to the channel by using the 0-9 buttons on the Remote Control. 4. To ERASE a channel, press the ERASE/WRITE button on the Remote Control Unit until “MANUAL MEMORY XX ERASE” is displayed on screen. To STORE a cha
ページ16に含まれる内容の要旨
H EADPH ONES Remote Sensor Remote The PROVE8 incorporates two infrared sensors which relay signals Sensor from the remote control to allow the unit to be controlled simply by Eye POWER EJECT REW PLAY F.F STOP pointing its remote control at the remote sensor eye. The repeater AU TO SO UR CE PIC TU RE P ROG RAM SE LE CT SELECT CHANNEL VOLUME function allows control of auxiliary equipment such as an Audiovox ON OFF AUTO Video Cassette Player. The infrared sensor can relay signals from most man
ページ17に含まれる内容の要旨
Wired Headphones There are two 1/8” headphone jacks on the PROVE8 that can be used with any standard wired stereo headphones. These jacks are controlled by the volume up / down buttons on the PROVE8 remote control. Remove the protective plastic cover to access the jacks. Remember to replace the cover when the jacks are not in use. Wired FM Modulator The PROVE8 is equipped with an RF modulator, that allows you to listen to the PROVE8 audio signal by tuning your vehicle’s radio to the selec
ページ18に含まれる内容の要旨
DVD Basics To get the optimum use out of the DVD section, make sure you read this section completely. Regional Coding Both the DVD player and disc are coded by region. These regional codes must match in order for the disc to play. If the codes don’t match, the disc won’t play. This unit’s code is region 1. Other regional codes cannot be played in this unit. The unit will display “WRONG REGION.” Types of Discs your DVD will play DVD discs – DVDs discs which contain video. Audio discs – Au
ページ19に含まれる内容の要旨
Settings and Adjustments This chapter describes how to set and how to adjust using the on-screen SETUP menu. Using the Setup Menu Using the setup display, you can do the initial setup, adjust the picture quality, and set the various outputs. You can also set a language for the on-screen display and the setup display and limit play back by children. 1) Press the SETUP button to display the “setup menu” on the TV screen. 2) Select the main item you want using the cursor ($%) buttons, and then
ページ20に含まれる内容の要旨
Settings for Display Press the SETUP button and select Display. The DISPLAY SETUP allows you to adjust screen setting (aspect ratio) Press and then use the (▼▲▼▲▼▲ )buttons to select the appropriate ▼▲▼▲ settings. 4:3 / PS This displays the wide picture on the screen with a portion of the left & right side removed. 4:3 / LB This displays the wide picture with black bands on the upper and lower portions of the screen. 16:9 This displays a picture with black bands on the upper and lower portion
