ページ1に含まれる内容の要旨
HD DIGITAL VIDEOCASSETTE RECORDER
SRW-5000
SRW-5500
FORMAT CONVERTER BOARD
HKSR-5001
DIGITAL BETACAM PROCESSOR BOARD
HKSR-5002
RGB PROCESSOR BOARD
HKSR-5003
OPERATION MANUAL [English]
1st Edition (Revised 4)
ページ2に含まれる内容の要旨
Important Safety Instructions • Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized
ページ3に含まれる内容の要旨
If you have questions on the use of the above Power Cord/ E1 (residential), E2 (commercial and light industrial), E3 Appliance Connector/Plug, please consult a qualified (urban outdoors), E4 (controlled EMC environment, ex. service personnel. TV studio). CAUTION The apparatus shall not be exposed to dripping or splashing and no objects filled with liquid, such as vases, shall be placed on the apparatus. CAUTION The unit is not disconnected from the AC power source (mains) as long as it is c
ページ4に含まれる内容の要旨
Table of Contents Chapter 1 Overview 1-1 Features ........................................................................... 9 1-1-1 Features of the SRW-5000/SRW-5500.............................9 1-1-2 Features of the Control Panel..........................................11 1-2 Optional Accessories ................................................... 13 1-3 Using the CD-ROM Manual .......................................... 13 1-3-1 CD-ROM System Requirements..................................
ページ5に含まれる内容の要旨
Chapter 4 Menu Settings 4-1 Registering and Storing Menu Settings ......................37 4-1-1 Menu Configuration........................................................37 4-1-2 Changing Menu Settings.................................................37 4-1-3 Registering Items to the VTR SETUP Menu..................38 4-1-4 VTR Memory Bank Function .........................................39 4-1-5 Memory Stick Operations ...............................................41 4-1-6 Adding Titles to
ページ6に含まれる内容の要旨
4-3-11 Superimposition of Character Information (PD CHARA/ CHARA SUPER/H-POS/V-POS)...................................64 4-4 CUE Menu ...................................................................... 68 4-4-1 Selecting a Multi-Cue Mode...........................................69 4-4-2 Registering Cue Points....................................................69 4-4-3 Erasing Cue Point Data...................................................71 4-4-4 Prerolling to a Cue Point..................
ページ7に含まれる内容の要旨
5-1-4 Simultaneously Monitoring Playback of Video and Audio Signals Being Recorded ................................................105 5-1-5 Audio Level Meter Display Modes...............................105 5-2 Recording.....................................................................106 5-3 Preparing for Playback ...............................................107 5-3-1 Setting Switches and Menus .........................................107 5-3-2 Adjusting the Audio Playback Level .........
ページ8に含まれる内容の要旨
Error Messages and Warning Messages ........................ 134 Error Messages .......................................................................134 Warning Messages..................................................................135 Error Log Menu......................................................................137 Glossary............................................................................. 139 Menu List .......................................................................
ページ9に含まれる内容の要旨
Chapter 1 Overview Overview 1 Chapter Input interface The input interface is based on the HD SDI (HD Serial 1-1 Features Digital Interface) format specified by BTA S-004B/005B/ 006B (SMPTE 291M/292M/299M) and ARIB STD-B4, allowing a single BNC coaxial cable to carry one component video signal, twelve digital audio channels, 1-1-1 Features of the SRW-5000/ and time code in time division multiplex; this is separated SRW-5500 for conversion to parallel data. Audio recording can be switched
ページ10に含まれる内容の要旨
Chapter 1 Overview With an HD-SD converter board installed, the unit can Noiseless playback with DT heads output both D1 SDI and analog composite signals. When using the HDCAM-SR or HDCAM format, the Besides audio data is output as digital data multiplexed dedicated playback DT heads allow you to perform with the HD SDI signal, it is also output via an AES/EBU noiseless playback in the range from –1 to +2 times normal digital interface. Analog data converted from digital data is speed, inc
ページ11に含まれる内容の要旨
Chapter 1 Overview HOME menu Features for ease of operation Use this menu to make the basic settings for recording, Compact, lightweight, low power consumption playback, and editing operations, and to select channels to The VTR is small and light enough to be used in outside be edited during insert editing. broadcast vans or in EFP (Electronic Field Production) TC menu assignments. Use this menu to make time code settings. Remote control operation VIDEO menu The VTR has a serial RS-422A 9
ページ12に含まれる内容の要旨
Chapter 1 Overview VTR memory banks Digital time counter These memory banks allow you to store up to eight pages The time counter display shows CTL and time codes 1) of VTR settings in addition to the current VTR settings. (LTC/VITC ), or user bits data for precise setting of edit Factory settings are also stored here, allowing the VTR to points. be reset to these values at any time. 1) LTC (Longitudinal Time Code): Memory sticks Time code recorded on a longitudinal track Each memory stick
ページ13に含まれる内容の要旨
Chapter 1 Overview 1-2 Optional Accessories 1-3 Using the CD-ROM Manual The following accessories can be used with this unit. HKSR-5001 Format Converter Board The supplied CD-ROM includes operation manuals for This allows format conversion described below: this unit (English, Japanese, French and German versions). 2-3 pulldown (23.98PsF to 59.94i, 24PsF to 60i) Conversion between 1080 and 720P 4:2:2 between 4:4:4 1-3-1 CD-ROM System (Conversion of 4:4:4 to 4:2:2 is possible only whe
ページ14に含まれる内容の要旨
Chapter 1 Overview Note If you lose the CD-ROM disc or become unable to read its content, for example because of a hardware failure, you can do the following. You can purchase a new CD-ROM disc to replace one that has been lost or damaged. Contact a Sony service representative. 14 1-3 Using the CD-ROM Manual
ページ15に含まれる内容の要旨
Chapter 2 Locations and Functions of Parts Locations and Functions 2 Chapter of Parts 2-1 Control Panel The control panel consists of the following sections: Lower control panel Upper control panel System set-up panel Upper control panel 4 Display section (see page 20) SR SRW W-5000 -5000 HD DIGIT HD DIGITA AL L VIDEO CASSETTE RECORDER VIDEO CASSETTE RECORDER 5 Search control section (see page 22) 3 Tape transport control section (see page 20) 2 Editing control section (see page 19)
ページ16に含まれる内容の要旨
Chapter 2 Locations and Functions of Parts 2-1-1 Upper Control Panel 1 POWER switch 2 ERROR indicator 3 WARNING indicator 4 EJECT button 5 Format indicators SRW-5000 HD DIGITAL VIDEO CASSETTE RECORDER EJECT POWER ERROR WARNING REMOTE PHONES CHANNEL ETHERNET 1(9P) 2(50P) CONDITION 6 REMOTE buttons Cassette compartment 7 CHANNEL CONDITION indicators 8 PHONES level control 9 PHONES jack a POWER switch ETHERNET: This button lights when pressed, enabling Pressing on the ‘(’ side of this swit
ページ17に含まれる内容の要旨
Chapter 2 Locations and Functions of Parts h PHONES level control i PHONES jack Adjusts the output level to the PHONES jack. Connect stereo headphones with 8 Ω impedance for audio monitoring during recording, playback, and editing. For details, see “5-1-2 Selecting Audio Signals” on Adjust the headphone output level with the PHONES level page 103. control. 2-1-2 Lower Control Panel 1 Menu control section 1 MONITOR R buttons 3 MULTI CONTROL knob 2 MONITOR L buttons MULTI L CONTROL CH1 CH2 C
ページ18に含まれる内容の要旨
Chapter 2 Locations and Functions of Parts VITC, switch DF/NDF, set the time code to be h DIAG (diagnostic) button displayed on an external monitor, and so on. Hold down the SFT button (see page 19) in the editing VIDEO button: Press this to go to the VIDEO menu control section and press this switch to switch to the DIAG screen. Use it to make video related settings. menu. AUDIO button: Press this to go to the AUDIO menu screen. Use it to make audio related settings. i DISPLAY button CUE b
ページ19に含まれる内容の要旨
Chapter 2 Locations and Functions of Parts Press this button again to exit from the recording audio f INPUT CHECK button level adjustment mode, and the MONITOR L and R While you hold down this button, the input signal is output buttons return to the normal status (this status is called the from the monitor output connector, so that you can monitor “MONITOR SELECT mode”). the input video and audio. When the LTC/VITC time code is shown on the display, you can check the time code generator.
ページ20に含まれる内容の要旨
Chapter 2 Locations and Functions of Parts e PLAY button 3 Tape transport control section Press to start playback. Press this button while holding down the REC/EDIT 1 STANDBY button button to start recording. Pressing this button during recording or manual editing 2 PREROLL button changes the VTR to playback mode. 3 PREVIEW/REVIEW button PREVIEW/ STANDBY PREROLL REVIEW f STOP button Press this button to stop recording or playback. REC/EDIT STOP PLAY When you insert the cassette, the VTR a
