ページ1に含まれる内容の要旨
i500
Professional Iron System
i500A & i500B
Professional Steam Cleaners
Instruction Manual
ページ2に含まれる内容の要旨
USER INSTRUCTIONS i500 Thank you for purchasing the Reliable™ i500 series iron system. Please follow the instructions carefully. With proper care and maintenance, your steamer will provide years of dependable service. 1. Remove the ironing station from its packing and make sure all packing parts have been taken off (including the protection bags). Lay the station on a flat and steady surface fitted to support it next to a wall socket (max. mt. 1,5). 2. It is recommended to lay the
ページ3に含まれる内容の要旨
COMPONENTS 1. Safety cap 2. Wand to hold mono-hose up 3. Iron power button 4. Boiler power button 5. Low water level light indicator 6. Temperature regulating knob 7. Steam button 8. Steam regulation knob 9. Manometer / pressure gauge
ページ4に含まれる内容の要旨
CAUTION • Do not leave the machine unattended while the plug is connected to the socket. • The iron reaches very high temperatures and it keeps being very hot even 15 minutes after it’s been switching off. Be careful not to burn yourself. • For complete safety, before filling the boiler, please disconnect the plug. • While using the machine, never unscrew or remove the cap while under pressure (1). Before removing it, make sure that it does not give off steam anymore by shuttin
ページ5に含まれる内容の要旨
TROUBLESHOOTING PROBLEM EXPLANATION SOLUTION Does It may happen that, while filling the In order to solve the problem, we suggest steam go tank, some water overfills the cap and using the machine as usual so that the out from flows inside the boiler wetting the insulating material dries up in about one the boiler? insulating material hour through the heat of the machine. In case you still have this problem after one working hour, please contact the service centre. Does the 1) While fi
ページ6に含まれる内容の要旨
i500 SPARE PARTS LISTS ITEM NR DESCRIPTION AC004 1 BOX AST114 2 FAIRLEAD FOR HEATING ELEMENT CD332 1 HANDLE CD332/2 1 HEXAGONAL HEADED SCREW FOR HANDLE CD338/1 1 NUT FOR WAND SUPPORT CD338/2 1 WASHER FOR STICK SUPPORT CD338/3 1 WAND SUPPORT CD339/1 1 TANK CD343/110 1 COPPER HEATING ELEMENT 1000 W - 120V CD342 1 TEFLON O-RING FOR THE HEATING ELEMENT CD346/35 1 PRESSURE SWITCH WITH RESET SET 2,5 BAR CD347 1 FAIRLEAD FOR CAP CONNECTION CD347/7000 1 SOLENOID VALVE FAIRLEAD CD34
ページ7に含まれる内容の要旨
ITEM NR DESCRIPTION FS009 1 WIRING 16AWG FS011 1 INSERTION FS012 1 SCREW FOR THERMOSTAT FS012 5 SCREW FOR THERMOSTAT FS014 3 SCREW FOR BACK HANDLE FS015 2 SCREW FOR MICRO SWITCH FS016 1 SCREW FOR MICRO SWITCH CASE FS017 2 SCREW FOR HANDLE FIXING FS018 3 SCREW FOR TERMINAL BLOCK STOP FS019 1 HANDLE COVER FS020 1 BACK HANDLE FS021 1 BUTTON HOLDER FS022 1 BUTTON CASE FS023 1 UPPER IRON BUTTON FS024 1 LOWER IRON BUTTON FS025 1 PLAQUE FOR BRACKET FS026 1 CABLE PRESS FS027 1 FRON
ページ8に含まれる内容の要旨
i500 PARTS DRAWING
ページ9に含まれる内容の要旨
i500 WIRING DIAGRAM
ページ10に含まれる内容の要旨
USER INSTRUCTIONS i500A/B Thank you for purchasing the Reliable™ i500A/B steam cleaner. Please follow the instructions carefully. With proper care and maintenance, your steamer will provide years of dependable service. 1. Unscrew the security cap and fill the steamer with a maximum of 2 Liters of water. If you have ordered the i500A with the nozzle and foot pedal, screw the nozzle into the steam fitting and plug in the 4- pin receptacle for the electronic foot pedal. If you have th
ページ11に含まれる内容の要旨
i500A COMPONENTS COMPONENT LIST 1. Safety cap 2. Pressure gauge (manometer) 3. Steam button 4. Boiler button 5. Low water light indicator 6. Steam regulating knob 7. Adjustable nozzle
ページ12に含まれる内容の要旨
i500B COMPONENTS COMPONENT LIST 1. Safety cap 2. Pressure gauge (manometer) 3. Steam button 4. Boiler button 5. Low water light indicator 6. Steam regulating knob 7. Cord support 8. Steam switch 9. Steam gun
ページ13に含まれる内容の要旨
CAUTION • Never leave the steamer unattended when it's plugged in. Always pull the plug out before you fill it with water. • Never remove the tank locking cap while the steamer is running and always check, before removing it, that no steam is coming out of the gun. • The tank-locking cap must be replaced with original spare parts. DO NOT TIGHTEN THE CAP TOO MUCH AS IT WILL CAUSE THE PLASTIC TO CRACK. MAKE SURE IT IS "SNUG". • The use of normal tap water is recommended for t
ページ14に含まれる内容の要旨
TROUBLESHOOTING PROBLEM EXPLANATION SOLUTION Does It may happen that, while filling the In order to solve the problem, we suggest steam go tank, some water overfills the cap using the machine as usual so that the out from and flows inside the boiler wetting insulating material dries up in about one the boiler? the insulating material hour through the heat of the machine. In case you still have this problem after one working hour, please contact the service centre. Does the 1) While fi
ページ15に含まれる内容の要旨
i500A SPARE PARTS LISTS ITEM CODE Q.TY DESCRIPTION AC003 1 BOX AST100 1 PEDAL WITH CORD CD332 1 HANDLE CD332/2 2 HEXAGONAL HEADED SCREW FOR HANDLE CD338/1 1 NUT FOR WAND SUPPORT CD338/2 3 WASHER FOR STICK SUPPORT CD338/3 1 WAND SUPPORT CD339/1 1 TANK CD343/110 1 COPPER HEATING ELEMENT 1000 W - 120V CD342 1 TEFLON O-RING FOR THE HEATING ELEMENT CD346/35 1 PRESSURE SWITCH WITH RESET SET 2,5 BAR CD347 1 FAIRLEAD FOR CAP CONNECTION CD347/7000 1 SOLENOID VALVE FAIRLEAD CD348 1 B
ページ16に含まれる内容の要旨
i500A PARTS DRAWING
ページ17に含まれる内容の要旨
i500B SPARE PARTS LISTS ITEM CODE Q.TY DESCRIPTION AC003 1 BOX CD332 1 HANDLE CD332/2 2 HEXAGONAL HEADED SCREW FOR HANDLE CD338/1 1 NUT FOR WAND SUPPORT CD338/2 3 WASHER FOR STICK SUPPORT CD338/3 1 WAND SUPPORT CD339/1 1 TANK CD343/110 1 COPPER HEATING ELEMENT 1000 W - 120V CD342 1 TEFLON O-RING FOR THE HEATING ELEMENT CD346/35 1 PRESSURE SWITCH WITH RESET SET 2,5 BAR CD347 1 FAIRLEAD FOR CAP CONNECTION CD347/7000 1 SOLENOID VALVE FAIRLEAD CD348 1 BULB THERMOSTAT 165° CD348
ページ18に含まれる内容の要旨
i500B PARTS DRAWING
ページ19に含まれる内容の要旨
i500A/B WIRING DIAGRAM
ページ20に含まれる内容の要旨
WATER LEVEL STICK
