ページ1に含まれる内容の要旨
KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
VP-471
3G HD-SDI to DVI Scaler
P/N: 2900-000639 Rev 7
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Safety Instructions 3 2.3 Recycling Kramer Products 3 3 Overview 4 3.1 Defining the VP-471 3G HD-SDI to DVI Scaler 5 4 Connecting the VP-471 6 5 Operating the VP-471 3G HD-SDI to DVI Scaler 8 5.1 Using the Front Panel Buttons 8 5.2 Using the OSD 8 6 Technical Specifications 11 Figures Figure 1: VP-471 3G HD-SDI to DVI Scaler 5 Figure 2: Connecting the VP-471 3G HD-SDI to DVI Scaler 7 VP-4
ページ4に含まれる内容の要旨
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups that are clearly defined by function: GROUP 1: Distribution Amplifi
ページ5に含まれる内容の要旨
2 Getting Started We recommend that you: Unpack the equipment carefully and save the original box and packaging materials for possible future shipment Review the contents of this user manual Go to http://www.kramerelectronics.com/support/product_downloads.asp to check for up-to-date user manuals, application programs, and to check i if firmware upgrades are available (where appropriate). 2.1 Achieving the Best Performance To achieve the best performance: Use only good quality
ページ6に含まれる内容の要旨
2.2 Safety Instructions Caution: There are no operator serviceable parts inside the unit ! Warning: Use only the Kramer Electronics input power wall adapter that is provided with the unit Warning: Disconnect the power and unplug the unit from the wall before installing 2.3 Recycling Kramer Products The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected
ページ7に含まれる内容の要旨
3 Overview The Kramer VP-471 3G HD-SDI to DVI Scaler is a high-performance digital scaler for signals up to 3G HD-SDI. It up and down-scales SDI, HD-SDI and 3G HD-SDI signals to resolutions up to WUXGA and 1080p. The VP-471 supports the following output resolutions: PC: SVGA, XGA, 1360x768, WXGA, SXGA, 1440x900, SXGA+, WSXGA+, UXGA, WUXGA, 720x576 @50, 720x480 (NTSC), 1280x720 @50/60 (HD 720), 1920x1080 @50/60 (HD 1080) SDTV: 480p and 576p HDTV: 720p @50/60Hz, 1080p @50/60H
ページ8に含まれる内容の要旨
3.1 Defining the VP-471 3G HD-SDI to DVI Scaler This section defines the VP-471. Figure 1: VP-471 3G HD-SDI to DVI Scaler # Feature Function 1 ON LED Lights green when the unit is powered on 2 SDI LED Lights blue when an SDI signal is detected on the input 3 MENU Button Press to display the OSD (On-screen Display) menu. When the OSD is not displayed, press together with the – button to set the output resolution to 720p (1280x720) 4 ENTER Button In the OSD, press to select the hig
ページ9に含まれる内容の要旨
4 Connecting the VP-471 Always switch off the power to each device before connecting it to your VP-471. After connecting your VP-471, connect its power and then i switch on the power to each device. To connect the VP-471 as illustrated in the example in Figure 2: 1. Connect the digital SDI camera to the SDI IN BNC connector. 2. Connect the SDI LOOP BNC connector to an SDI display. 3. Connect the S/PDIF AUDIO OUT RCA connector to the digital AV receiver. 4. Connect the LEFT and RIGH
ページ10に含まれる内容の要旨
Figure 2: Connecting the VP-471 3G HD-SDI to DVI Scaler VP-471 - Connecting the VP-471 7
ページ11に含まれる内容の要旨
5 Operating the VP-471 3G HD-SDI to DVI Scaler The VP-471 is operated directly from the front panel buttons (see Section 5.1) and from the OSD menu (see Section 5 .2). 5.1 Using the Front Panel Buttons During normal operation (without the OSD), the front panel buttons perform in the following manner: MENU: Displays the OSD Main Menu (see Section 5.2). Press a second time to close the OSD FREEZE: Freezes the display. Press a second time to unfreeze the display MENU and AUTO
ページ12に含まれる内容の要旨
Parameter Setting Example: To set the green offset value of the display output to 42: 1. From normal operation, press MENU. The OSD main menu appears on the screen. 2. Press the + or – button to highlight COLOR. COLOR changes to green. 3. Press ENTER. The Display submenu is displayed. 4. Press the + or – button to highlight G OFFSET. G OFFSET changes to green. 5. Press ENTER. The G OFFSET parameter changes to red. 6. Press the + button to increase the value to 42. 7. Press ENTE
ページ13に含まれる内容の要旨
5.2.2 The Display Submenu The Display submenu sets the display output resolution, size and aspect ratio. The following table defines the display output parameters. Parameter Parameters Factory Default OUTPUT Sets the output resolution. 1024x768 Native, 1920x1080p @50 (HD 1080), 1280x720p @50 (HD @60 720), 720x576p @50, 1920x1080p (HD 1080), 1280x720p (HD 720), 720x480p (NTSC), 1920x1200p (WUXGA), 1600x1200 (UXGA), 1680x1050 (WSXGA+), 1400x1050 (SXGA+), 1440x900, 1280x1024 (SXGA), 1
ページ14に含まれる内容の要旨
6 Technical Specifications INPUT: 1 SD/HD/3G HD-SDI plus loop on a BNC connector OUTPUTS: 1 DVI-D on DVI-I connector, 1 S/PDIF digital audio on an RCA connector, 1 unbalanced stereo audio on 2 RCA connectors INPUT RESOLUTIONS: 480i @59.94Hz, 576i @50Hz, 720p @50/60Hz, 1080p @24/25/30/50/60Hz, 1080i @50/60Hz OUTPUT RESOLUTIONS: Native, 1920x1080p @50 (HD 1080), 1280x720p @50 (HD 720), 720x576p @50, 1920x1080p (HD 1080), 1280x720p (HD 720), 720x480p (NTSC), 1920x1200p (WUXGA), 1600x1
ページ15に含まれる内容の要旨
ページ16に含まれる内容の要旨
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING Disconnect the unit from the power ! supply before opening and servicing P/N: 2900-000639 Rev: 7
